1. Úvod
This manual provides essential information for the safe and efficient operation of your Mastervolt ChargeMaster Plus 12/35-3 Battery Charger. Please read this manual thoroughly before installation and use to ensure proper functionality and to prevent damage to the unit or connected systems.
The Mastervolt ChargeMaster Plus 12/35-3 is an advanced automatic battery charger designed for marine and automotive applications, providing optimal charging for various battery types.
2. Bezpečnostní informace
VAROVÁNÍ: Nedodržení těchto bezpečnostních pokynů může vést k úrazu elektrickým proudem, požáru nebo vážnému zranění.
- Před instalací nebo servisem nabíječky vždy odpojte napájení.
- Zajistěte dostatečné větrání kolem nabíječky, aby nedošlo k přehřátí.
- Do not expose the charger to rain, spray, or excessive moisture.
- This device is designed for indoor use in a protected environment.
- Instalaci a údržbu by měl provádět pouze kvalifikovaný personál.
- Pokud je nabíječka jakkoli poškozena, nepoužívejte ji.
- Keep flammable materials away from the charger.
For detailed safety guidelines, refer to local electrical codes and marine standards.
3. Obsah balení
Ověřte, zda jsou v balení přítomny všechny položky:
- Mastervolt ChargeMaster Plus 12/35-3 Battery Charger Unit
- Montážní materiál (šrouby, podložky)
- Uživatelská příručka (tento dokument)
- Záruční list
4. Nastavení a instalace
4.1 Montáž nabíječky
The ChargeMaster Plus 12/35-3 should be mounted in a dry, well-ventilated area, away from direct sunlight and heat sources. Ensure sufficient clearance around the unit for airflow.
- Select a suitable mounting location that can support the weight of the charger.
- Use the provided mounting template (if applicable) or measure the mounting holes on the back of the unit.
- Secure the charger firmly to a solid surface using appropriate screws and fasteners.
Obrázek 1: Zadní view of the Mastervolt ChargeMaster Plus 12/35-3, illustrating the integrated mounting brackets for secure installation.
4.2 Elektrické připojení
All electrical connections must comply with local regulations and standards. Consult a qualified electrician if unsure.
- Connect the AC input cable to a grounded power source.
- Connect the DC output cables to your battery bank(s). Ensure correct polarity (positive to positive, negative to negative). The ChargeMaster Plus 12/35-3 supports multiple battery banks.
- Verify all connections are secure and free from corrosion.
Obrázek 2: Přední strana view of the Mastervolt ChargeMaster Plus 12/35-3, showing the control panel and connection points.
Obrázek 3: Zkosený vršek view of the Mastervolt ChargeMaster Plus 12/35-3, highlighting the ventilation grilles and overall compact design.
5. Návod k obsluze
5.1 Zapnutí/vypnutí
Once all connections are made, connect the charger to the AC power source. The charger will automatically initiate its startup sequence.
- To power on: Ensure AC power is supplied. The power indicator light will illuminate.
- To power off: Disconnect the AC power source.
5.2 Proces nabíjení
The ChargeMaster Plus 12/35-3 features an intelligent 3-stage+ charging process to optimize battery life and performance:
- Hromadná Stage: Delivers maximum current to rapidly charge the battery to approximately 80%.
- Absorpce Stage: Charges the battery to 100% at a constant voltage, gradually reducing current.
- Plovák Stage: Udržuje baterii plně nabitou s nízkou, konstantní hlasitostítage, čímž se zabrání přebíjení.
- Údržba Stage: Periodically checks battery voltage and initiates a new charging cycle if needed.
The charger automatically detects the battery type and condition to apply the most suitable charging profile. Refer to the display indicators for charging status.
6. Údržba
Regular maintenance ensures the longevity and optimal performance of your Mastervolt ChargeMaster Plus 12/35-3.
- Čištění: Periodically wipe the exterior of the charger with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Větrání: Ensure that the ventilation openings are clear of dust and debris. Blocked vents can lead to overheating.
- Spojení: Annually inspect all electrical connections for tightness and signs of corrosion. Tighten any loose connections and clean corroded terminals.
- Prostředí: Confirm the charger remains in a dry, protected environment.
CAUTION: Do not open the charger casing. Uvnitř nejsou žádné součásti, které by mohl uživatel opravit.
7. Řešení problémů
This section addresses common issues you might encounter with your charger. For problems not listed here, contact Mastervolt support.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Nabíječka se nezapíná | No AC input power; Blown fuse; Faulty connection. | Check AC power source and circuit breaker. Inspect input cable and connections. |
| Baterie se nenabíjí | Incorrect battery connection; Battery deeply discharged; Faulty battery. | Verify DC output connections and polarity. Allow time for deeply discharged batteries to recover. Test battery condition. |
| Overheating / Shutdown | Nedostatečné větrání; Přetížení. | Ensure clear airflow around the unit. Reduce load if possible. Allow unit to cool down. |
8. Specifikace
| Funkce | Detail |
|---|---|
| Značka | Mastervolt |
| Název modelu | ChargeMaster Plus 12/35-3 (Model Number: 44010250) |
| Jmenovitý výstupní objemtage | 12 Volts DC (Requires AC input power, not specified in data) |
| Maximální výstupní proud | 25 Amps |
| Hmotnost položky | 5.5 libry (přibližně 2.5 kg) |
| Rozměry položky (DxŠxV) | 5.2 x 2.36 x 9.21 palců (přibližně 13.2 x 6 x 23.4 cm) |
| Materiál | Plast |
| Barva | No Color (referring to the product's primary color, which is teal/green) |
| První dostupný termín | 14. února 2015 |
9. Záruka a podpora
The Mastervolt ChargeMaster Plus 12/35-3 comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Mastervolt webmísto.
For technical support, service, or spare parts, please contact Mastervolt customer service or your authorized dealer. Have your product model number (44010250) and serial number ready when contacting support.
Mastervolt Support: www.mastervolt.com/support
