Zavedení
This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your AstralPool Pulit Advance +5 Robotic Pool Cleaner. Please read this manual thoroughly before using the appliance.
Image: The AstralPool Pulit Advance +5 Robotic Pool Cleaner, a blue and dark blue unit with a handle, designed for efficient pool cleaning.
Důležité bezpečnostní pokyny
- Před prováděním jakékoli údržby nebo čištění vždy odpojte napájení.
- Do not operate the cleaner if the power cable is damaged.
- Ensure the power supply unit is placed at least 3.5 meters (11.5 feet) from the edge of the pool.
- Nevstupujte do bazénu, pokud je čistič v provozu.
- Tento spotřebič není určen pro použití osobami se sníženými fyzickými, smyslovými nebo duševními schopnostmi nebo nedostatečnými zkušenostmi a znalostmi, pokud na ně nedohlíží osoba odpovědná za jejich bezpečnost nebo jim nebyla poskytnuta instrukce ohledně používání spotřebiče.
Nastavení a první použití
Vybalování
Opatrně vyjměte všechny součásti z obalu. Zkontrolujte, zda jsou všechny součásti přítomny:
- Pulit Advance +5 Robotic Pool Cleaner unit
- Napájecí jednotka
- 18m self-floating cable
- Transport caddy
- PVA brushes
- Standard filter cartridges (fine and coarse filters available separately)
Image: The AstralPool Pulit Advance +5 cleaner shown with its transport caddy and the coiled self-floating cable, ready for setup.
Connecting the Cleaner
- Place the power supply unit in a shaded area, at least 3.5 meters (11.5 feet) from the pool edge.
- Connect the self-floating cable to the cleaner unit. Ensure a secure connection.
- Connect the other end of the self-floating cable to the power supply unit.
- Zapojte napájecí zdroj do uzemněné elektrické zásuvky.
Návod k obsluze
Umístění čističe do bazénu
Jemně spusťte vysavač do bazénu. Nechte ho klesnout ke dnu a uvolněteasing any trapped air bubbles. Ensure the cable is not tangled.
Obrázek: Přední strana view of the AstralPool Pulit Advance +5, highlighting its compact design and the "Powered by Aquabot" branding.
Spuštění čisticího cyklu
Once the cleaner is at the bottom of the pool and the power supply is connected, press the ON/OFF button on the power supply unit. The cleaner will begin its cleaning cycle automatically.
The Pulit Advance +5 operates in cycles of 1.5 to 2 hours, utilizing its Aquasmart electronic control system to efficiently clean the pool floor, walls, and waterline. The effective vibrating cleaning brush dislodges dirt from all surfaces.
Adjustable Suction Nozzles
The cleaner features height-adjustable suction nozzles to ensure perfect adaptation to any pool type, optimizing cleaning performance.
Údržba
Cleaning Filter Cartridges
The Pulit Advance +5 features top-access filter cartridges, making them easy to clean without direct contact with dirt. A LED indicator on the power supply unit will illuminate when the filter needs cleaning.
- Disconnect the power supply unit from the electrical outlet.
- Vyjměte čistič z bazénu.
- Open the top access cover of the cleaner.
- Remove the filter cartridges.
- Rinse the cartridges thoroughly with a garden hose until all debris is removed.
- Reinsert the clean filter cartridges and close the top access cover.
Image: The AstralPool Pulit Advance +5 with its top filter compartments open, demonstrating the easy access for cleaning the filter cartridges.
Údržba kartáče
Periodically inspect the PVA brushes for wear and tear. Replace them if they show significant damage to ensure optimal cleaning performance.
Obrázek: Spodní strana view of the AstralPool Pulit Advance +5, clearly showing its PVA brushes and traction system, essential for effective pool cleaning.
Správa kabelů
After each use, carefully coil the self-floating cable to prevent tangling and damage. Store the cleaner and cable in a dry, shaded area.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Čistič se nespustí | No power to unit; Cable not properly connected; Power supply unit malfunction. | Check power outlet; Ensure all cable connections are secure; Contact customer support if power supply unit is faulty. |
| Špatný čisticí výkon | Clogged filter cartridges; Worn brushes; Obstruction in suction nozzles. | Clean filter cartridges; Inspect and replace brushes if necessary; Check and clear suction nozzles. |
| Čistič nešplhá po stěnách | Clogged filter; Air trapped in cleaner; Water chemistry imbalance (e.g., high calcium). | Clean filter; Tilt cleaner to release air bubbles; Check pool water chemistry. |
| Cable tangles | Improper cable deployment; Excessive cable length in pool. | Ensure cable is fully extended and untangled before placing cleaner; Only use necessary cable length. |
Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | Pulit Advance +5 |
| Čisticí prostor | Pool floor, walls, and waterline |
| Doba cyklu čištění | 1.5 - 2 hodin |
| Délka kabelu | 18 meters (self-floating) |
| Typ filtru | Top-access filter cartridges (standard, fine, coarse) |
| Štětce | PVA brushes |
| Řídicí systém | Aquasmart electronic control |
| Rozměry (D x Š x V) | 0.16 x 0.16 x 0.14 cm (Product only, not shipping dimensions) |
| Hmotnost | 500 grams (Product only, not shipping weight) |
| Materiál | Plast |
Informace o záruce
Specific warranty terms and conditions for the AstralPool Pulit Advance +5 Robotic Pool Cleaner are typically provided at the point of purchase or within separate documentation included with the product. Please refer to your purchase receipt and the warranty card for details regarding coverage period, what is covered, and how to make a claim.
Note: The product description mentions "Information indisponible sur les pièces détachées" (Information unavailable on spare parts). This suggests that spare parts availability might not be guaranteed or easily accessible.
Zákaznická podpora
For technical assistance, spare parts, or warranty claims, please contact your authorized AstralPool dealer or visit the official AstralPool webstránky pro kontaktní informace podpory.
It is recommended to have your product model number (Pulit Advance +5) and purchase date available when contacting support.
