GE Lighting F32T8/SPX41/ECO2

GE Lighting F32T8/SPX41/ECO2 Linear Fluorescent Lamp User Manual

Model: F32T8/SPX41/ECO2 | Brand: GE Lighting

Product Overview

The GE Lighting 68852 F32T8/SPX41/ECO2 is a 32-watt, 4-foot T8 linear fluorescent lamp designed for general illumination. It features a 4100K color temperature, providing a cool white light, and boasts a long rated life of 30,000 hours. This lamp is equipped with a G13 medium bi-pin base for easy installation into compatible fixtures. It offers a high color rendering index (CRI) of 85 and a luminous output of 2,925 lumens, with an efficiency of 91 lumens per watt.

Image of the GE Lighting F32T8/SPX41/ECO2 linear fluorescent lamp, showing its tubular shape and the bi-pin base at one end.

This image displays the GE Lighting F32T8/SPX41/ECO2 linear fluorescent lamp. It is a long, cylindrical tube with a white finish. One end of the lamp is visible, featuring a silver-colored cap with two brass bi-pins, which are the electrical contacts for installation into a compatible fixture.

Setup and Installation

Before installation, ensure the power to the fixture is turned off at the circuit breaker to prevent electrical shock. Handle the lamp carefully, as it is made of soda lime glass and can break if dropped or mishandled.

  1. Verify Compatibility: Ensure your fixture is designed for T8 linear fluorescent lamps and has a G13 medium bi-pin base. The lamp measures approximately 48 inches (1219.2 mm) in length and 1 inch (25.4 mm) in diameter.
  2. Inspect the Lamp: Before installation, visually inspect the lamp for any signs of damage, such as cracks or broken glass. Do not install a damaged lamp.
  3. Insert the Lamp: Align the two bi-pins on each end of the lamp with the slots in the fixture's lampholders. Gently push the lamp into the lampholders and rotate it 90 degrees until it clicks securely into place. Ensure both ends are firmly seated.
  4. Minimum Starting Temperature: This lamp is designed to start reliably at temperatures as low as 10.0 °C (50 °F).

Once the lamp is securely installed, you may restore power to the fixture.

Operating Instructions

The GE Lighting F32T8/SPX41/ECO2 lamp operates at 32 watts and provides a bright, cool white light with a color temperature of 4100 Kelvin. It produces 2925 lumens of light output, making it suitable for various general lighting applications.

  • Power On/Off: Use the fixture's switch or the main power control to turn the lamp on or off.
  • Dimmable Feature: This lamp is dimmable. To utilize this feature, ensure your fixture is connected to a compatible dimming ballast and control system. Refer to your dimming system's instructions for proper operation.
  • Voltage Compatibility: The lamp is designed to operate within a voltage range of 100 to 240 Volts at 50 to 60 Hertz, depending on the ballast used.

Maintenance

Proper maintenance ensures optimal performance and extends the life of your fluorescent lamp.

  • Cleaning: Periodically, with the power off and the lamp cool, gently wipe the lamp surface with a soft, dry, lint-free cloth to remove dust and debris. Do not use liquid cleaners directly on the lamp.
  • Lamp Replacement: The rated average life of this lamp is 30,000 hours. When the lamp reaches the end of its life, it may flicker, dim, or fail to illuminate. Replace it with a new GE Lighting F32T8/SPX41/ECO2 or an equivalent T8 fluorescent lamp.
  • Disposal: Fluorescent lamps contain small amounts of mercury and should be disposed of according to local, state, and federal regulations. Do not dispose of them in regular household trash. Many retailers and recycling centers offer fluorescent lamp recycling programs.

Troubleshooting

If you encounter issues with your fluorescent lamp, refer to the following common troubleshooting steps:

ProblemPossible CauseSolution
Lamp does not light up.
  • No power to the fixture.
  • Lamp not properly seated.
  • Faulty ballast.
  • Lamp has reached end of life.
  • Broken lamp.
  • Check circuit breaker and wall switch.
  • Ensure lamp pins are fully inserted and twisted into lampholders.
  • Consult an electrician to check or replace the ballast.
  • Replace the lamp.
  • Carefully remove and dispose of the broken lamp, then replace.
Lamp flickers or hums.
  • Lamp nearing end of life.
  • Incorrect or failing ballast.
  • Low ambient temperature.
  • Replace the lamp.
  • Consult an electrician to check or replace the ballast.
  • Ensure operating temperature is above 10.0 °C (50 °F).
Reduced light output.
  • Dust accumulation on lamp.
  • Lamp nearing end of life.
  • Clean the lamp surface.
  • Replace the lamp.

Specifications

CharacteristicValue
Product Code68852
DescriptionF32T8/SPX41/ECO2
Lamp TypeLinear Fluorescent - Straight Linear
Bulb Shape SizeT8
BaseMedium Bi-Pin (G13)
Wattage (NOM)32.0 W
Color Temperature4100 Kelvin (Cool White)
Mean Lumens (NOM)2770.0 lm
White Brightness2925 Lumens
Efficiency91 lumens/watt
Color Rendering Index (CRI)85
Rated Life (NOM)30000.0 h (3E+4 Hours)
Maximum Overall Length (MOL)48.000 in (1219.2 mm)
Bulb Diameter (DIA)1.000 in (25.4 mm)
Bulb MaterialSoda Lime
Starting Temperature10.0 °C (50 °F)
Voltage100 to 240 Volts (50-60 Hz)
DimmableYes

Warranty and Support

For specific warranty information regarding your GE Lighting F32T8/SPX41/ECO2 lamp, please refer to the documentation provided at the time of purchase or contact GE Lighting directly. Warranty terms typically cover defects in materials and workmanship under normal use.

If you require technical support or have questions not covered in this manual, please contact the retailer from whom you purchased the product or visit the official GE Lighting website for customer service contact details.

© 2024 GE Lighting. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.