Zavedení
This manual provides instructions for the installation, operation, and maintenance of your SOMFY Situo RTS Pure radio wall transmitter. This device is designed for the manual control of one or more radio-controlled Somfy drives, such as blinds, awnings, or roller shutters. Please read this manual carefully before using the product to ensure safe and correct operation.
Bezpečnostní pokyny
- Chraňte zařízení před vlhkostí a extrémními teplotami.
- Nepokoušejte se zařízení otevírat ani opravovat sami. Veškerý servis svěřte kvalifikovanému personálu.
- Ujistěte se, že je baterie vložena správně podle vyznačené polarity.
- Použité baterie zlikvidujte zodpovědně v souladu s místními předpisy.
- Toto zařízení je určeno pouze pro vnitřní použití.
Konec produktuview
The SOMFY Situo RTS Pure is a sleek, handheld radio transmitter designed for intuitive control of your Somfy RTS products.
Tento obrázek ukazuje přední stranu view of the SOMFY Situo RTS Pure radio wall transmitter. It is a white, rectangular device with three gray circular buttons arranged vertically in the center: an 'up' arrow, a 'my' button, and a 'down' arrow. Below the buttons, there is a small black indicator light. The Somfy logo is subtly embossed at the bottom.
Klíčové komponenty:
- Tlačítko nahoru (^): Moves the connected drive upwards (e.g., opens blinds).
- My Button (my): Stops the drive or recalls a pre-programmed favorite position.
- Tlačítko dolů (v): Moves the connected drive downwards (e.g., closes blinds).
- Kontrolka: Provides visual feedback on commands and battery status.
- Programming Button (rear): Used for pairing the transmitter with Somfy RTS drives.
Nastavení
1. Instalace baterie
- Gently slide open the battery compartment cover on the back of the transmitter.
- Insert the supplied battery (type CR2430) ensuring correct polarity (+/-).
- Bezpečně zavřete kryt bateriového prostoru.
2. Pairing with a Somfy RTS Drive
To control a Somfy RTS drive, the transmitter must first be paired. This process typically involves using an existing paired transmitter or the drive's programming button.
- Using an existing transmitter: Take an already programmed RTS transmitter that controls the desired drive. Press and hold its programming button (usually on the back) until the drive moves briefly.
- Immediately after the drive moves, take your new Situo RTS Pure transmitter. Press and hold its programming button (located on the back, often recessed) until the drive moves briefly again. This confirms successful pairing.
- Without an existing transmitter: Refer to the specific instructions for your Somfy RTS drive to put it into programming mode. Once the drive is in programming mode, press the programming button on your Situo RTS Pure transmitter until the drive moves briefly.
Note: If you are pairing with multiple drives, repeat the process for each drive or group of drives.
Návod k obsluze
Základní ovládání:
- To move the drive up (e.g., open blinds), press the ^ tlačítko.
- To move the drive dolů (e.g., close blinds), press the v tlačítko.
- Na zastávka the drive at any point, press the my tlačítko.
Setting a Favorite Position ('my' position):
- Move the drive to your desired favorite position using the ^ or v tlačítka.
- Once at the desired position, press and hold the my button until the drive moves briefly. This saves the position.
Recalling a Favorite Position:
- From any position, a short press of the my button will move the drive to its pre-programmed favorite position.
Údržba
Výměna baterie:
When the indicator light on the transmitter no longer illuminates or the range decreases significantly, it is time to replace the battery.
- Slide open the battery compartment cover on the back of the transmitter.
- Vyjměte starou baterii CR2430.
- Insert a new CR2430 battery, observing the correct polarity (+/-).
- Zavřete kryt prostoru pro baterie.
Note: Dispose of old batteries according to local environmental regulations.
Čištění:
Vysílač čistěte měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Vysílač nereaguje. | Vybitá baterie. | Vyměňte baterii. |
| Snížený provozní dosah. | Low battery or radio interference. | Replace battery. Check for sources of interference (e.g., large metal objects, other radio devices). |
| Drive does not respond after pairing. | Pairing unsuccessful or drive is not powered. | Repeat the pairing process. Ensure the drive has power. |
Specifikace
- Model: Situo RTS Pure
- Číslo modelu výrobce: 322147
- Značka: Somfy
- Rádiová frekvence: 433.42 MHz
- Rolling Code System: Ano
- Rozsah: Approximately 20 meters (indoors, depending on environment)
- Typ baterie: CR2430 (součástí balení)
- Rozměry: 1 x 1 x 1 cm (approximate, as per product data); 60 grams
- Zamýšlené použití: Krytý
Záruka a podpora
Informace o záruce a technickou podporu získáte od oficiálního prodejce Somfy. website or contact your local Somfy dealer. Keep your proof of purchase for warranty claims.
Online zdroje: www.somfy.com
