Whirlpool AP51030KB

Whirlpool AP51030KB Whispure True HEPA Air Purifier User Manual

Model: AP51030KB (also known as WP500B)

Zavedení

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Whirlpool AP51030KB Whispure True HEPA Air Purifier. Please read all instructions carefully before using the appliance and retain this manual for future reference.

Důležité bezpečnostní pokyny

Konec produktuview

The Whirlpool AP51030KB Whispure True HEPA Air Purifier is designed to improve indoor air quality by capturing airborne particles and odors. It features a multi-stage filtration system and multiple fan speeds for customized air purification.

Whirlpool AP51030KB Whispure True HEPA Air Purifier, Slate Black

Image: The Whirlpool AP51030KB Whispure True HEPA Air Purifier in Slate Black, showcasing its compact design and front control panel.

Klíčové vlastnosti:

Produkt Video:

Video: An official product demonstration highlighting the features and operational aspects of the Whirlpool Whispure True HEPA Air Purifier.

Nastavení

1. Vybalování

Carefully remove the air purifier from its packaging. Retain packaging materials for future storage or transport if needed.

2. Instalace filtru

  1. Ujistěte se, že je jednotka odpojena od elektrické zásuvky.
  2. Otevřete přední mřížku čističky vzduchu.
  3. Remove the True HEPA filter and charcoal pre-filter from their protective plastic bags. It is critical to remove all plastic packaging from the filters before installation. Failure to do so will restrict airflow and prevent proper operation.
  4. Install the charcoal pre-filter first, followed by the True HEPA filter, ensuring they are seated correctly.
  5. Bezpečně zavřete přední mřížku.

3. Umístění

Place the air purifier on a firm, level surface. For optimal performance, position the unit in the room where air quality improvement is desired, ensuring there is adequate space around the air intake and outlet for proper air circulation. Avoid placing it directly against walls or furniture that could obstruct airflow.

Návod k obsluze

1. Zapnutí/vypnutí

Zapojte napájecí kabel do standardní elektrické zásuvky. Stisknutím tlačítka napájení na ovládacím panelu zapnete nebo vypnete jednotku.

2. Volba rychlosti ventilátoru

Use the Fan Speed button to cycle through the available settings:

3. Filter Replacement Indicators

The control panel features two separate indicator lights:

When an indicator light illuminates, replace the corresponding filter as described in the Maintenance section. After replacing a filter, press and hold the reset button for that filter until the light turns off.

Údržba

Pravidelná údržba zajišťuje optimální výkon a prodlužuje životnost čističky vzduchu.

1. Výměna filtru

The filter replacement indicators will signal when filters need to be changed. The charcoal pre-filter typically requires more frequent replacement than the True HEPA filter.

  1. Odpojte čističku vzduchu.
  2. Otevřete přední mřížku.
  3. Remove the old filter(s).
  4. Insert new, unwrapped filter(s), ensuring correct orientation.
  5. Zavřete přední mřížku.
  6. Plug in the unit and press the corresponding filter reset button until the indicator light turns off.

2. Čištění jednotky

Vnější povrch čističky vzduchu otřete měkkým, damp cloth as needed. Do not use abrasive cleaners or solvents. Ensure the unit is unplugged before cleaning.

Odstraňování problémů

ProblémMožná příčinaŘešení
Jednotka se nezapne.Žádná síla.Ensure the power cord is securely plugged into a working electrical outlet. Check household fuse/circuit breaker.
Low airflow or unit is loud.Filters are clogged or still in plastic packaging.Check if filters are dirty and need replacement. Verify that all plastic packaging has been removed from both the HEPA and charcoal filters.
Unusual noise (e.g., high-pitched sound).Foreign object in fan, motor issue, or filter not seated correctly.Unplug the unit and check for any obstructions. Ensure filters are properly installed. If the noise persists, contact customer support.
Kontrolka filtru svítí i po výměně.Tlačítko pro resetování filtru nebylo stisknuto.Press and hold the corresponding filter reset button until the light turns off.

Specifikace

Informace o záruce

This Whirlpool air purifier is covered by a Manufacturer's 5-year Limited Warranty. This warranty covers defects in materials or workmanship under normal household use. Additionally, the product includes a Manufacturer's 30-day Money Back Quiet Guarantee. Please refer to the warranty documentation included with your product for full terms and conditions, or visit the official Whirlpool webstránky pro podrobnosti.

Zákaznická podpora

For technical assistance, replacement parts, or warranty inquiries, please contact Whirlpool Customer Service. Have your model number (AP51030KB or WP500B) and serial number ready when contacting support.

You can typically find contact information on the Whirlpool official webwebu nebo v dokumentaci dodané s vaším produktem.