Hager 5300 Series Heavy Duty Surface Door Closer User Manual

1. Úvod

The Hager 5300 Series Grade 1 Heavy Duty Surface Door Closer is engineered for demanding environments such as schools, hospitals, and high-traffic commercial buildings. Constructed from a durable aluminum alloy, this door closer provides reliable and smooth door control. Its design facilitates straightforward installation and maintenance, contributing to the security and functionality of your facility.

2. Bezpečnostní informace

• Pečlivě si přečtěte všechny pokyny before installation and operation. Failure to follow instructions may result in injury or product damage.
• Noste vhodné osobní ochranné prostředky (OOP), including safety glasses, during installation.
• Ensure the door and frame are structurally sound and capable of supporting the door closer's weight and operational forces.
• Do not attempt to modify the door closer. Unauthorized modifications can compromise safety and void the warranty.
• Udržujte děti a domácí zvířata mimo dosah místa instalace.
• Exercise caution when adjusting the spring tension, as springs are under pressure.

3. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• Hager 5300 Series Door Closer Body
• Standard Tri-Pack Arm (Parallel, Regular, and Top Jamb configurations)
• Montážní materiál (šrouby, konzoly atd.)
• Návod k použití (tento dokument)

Image 1: Typical package contents for the Hager 5300 Series Door Closer. Actual contents may vary slightly.

4. Nastavení a instalace

The Hager 5300 Series door closer offers versatile multi-mount installation options, including parallel arm, regular arm, and top jamb configurations. The installation type is screw-in. Refer to the specific template provided with your closer for precise hole drilling and mounting instructions.

4.1. Obecné kroky instalace

1. Připravte dveře a zárubeň: Ensure the mounting surfaces are clean, flat, and reinforced if necessary.
2. Select Mounting Position: Determine the appropriate mounting configuration (regular, parallel, or top jamb) based on door swing and desired appearance.
3. Označte otvory pro vrtání: Use the provided template to accurately mark the locations for drilling pilot holes on the door and frame.
4. Vrtací pilotní otvory: Drill pilot holes to the recommended depth and diameter for the mounting screws.
5. Namontujte tělo zavírače: Secure the door closer body to the door or frame using the provided screws.
6. Install the Arm Assembly: Attach the main arm to the closer spindle and the forearm to the frame or door bracket, depending on the chosen configuration. Ensure all connections are tight.
7. Počáteční nastavení: Perform initial adjustments as described in Section 5 to ensure the door closes smoothly and latches correctly.

Obrázek 2: Příkladample diagram showing a regular arm installation. Refer to your specific template for detailed instructions.

5. Operation & Adjustment

The Hager 5300 Series door closer features adjustable spring sizes from 2 to 6, allowing for customization to various door weights and sizes. Adjustment valves are staked to prevent accidental removal, ensuring consistent performance.

5.1. Spring Power Adjustment

The spring power determines the closing force of the door. To adjust:

• Locate the spring adjustment nut on the end of the closer body.
• Turn the nut clockwise to increase closing force (for heavier doors or higher wind conditions).
• Turn the nut counter-clockwise to decrease closing force (for lighter doors or easier opening).
• Pozor: Do not over-tighten or loosen the spring adjustment nut beyond recommended limits. Refer to the closer body markings for safe adjustment range.

5.2. Closing Speed Adjustment

The door closer typically has two or three adjustment valves to control different phases of the closing cycle:

• Main Closing Speed Valve: Controls the speed of the door from its fully open position to approximately 10-15 degrees from closed.
• Zavírací ventil rychlosti: Řídí rychlost dveří pro posledních 10–15 stupňů zavření a zajišťuje bezpečné zajištění dveří.
• Backcheck Valve (if present): Provides hydraulic resistance when the door is opened forcefully beyond a certain point, protecting the door and frame.

To adjust any valve, turn it clockwise to decrease speed (slower closing) or counter-clockwise to increase speed (faster closing). Make small adjustments (quarter turns) and test the door's operation after each adjustment.

Image 3: Location of typical adjustment valves on the Hager 5300 Series door closer body.

6. Údržba

Regular maintenance ensures the longevity and optimal performance of your Hager 5300 Series door closer. The tempered springs, made of double heat-treated steel, contribute to its durability.

• Pravidelná prohlídka: Annually inspect the door closer for any signs of wear, damage, or loose fasteners. Check the arm assembly, mounting screws, and closer body.
• Čištění: Otřete tělo a rameno zavírače měkkým,amp hadříkem odstraňte prach a nečistoty. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
• Mazání: The internal components are factory-lubricated and sealed. No additional lubrication is typically required. If the arm pivots squeak, a small amount of silicone-based lubricant can be applied to the pivot points.
• Re-adjustment: If the door's closing speed or force changes over time, re-adjust the valves as described in Section 5.
• Utáhněte upevňovací prvky: Periodically check and tighten all mounting screws and arm assembly fasteners to ensure they are secure.

7. Řešení problémů

8. Specifikace

9. Záruka a podpora

For specific warranty information regarding your Hager 5300 Series Door Closer, please refer to the documentation provided at the time of purchase or visit the official Hager website. Hager Companies stands behind the quality of its products.

For technical support, replacement parts, or further assistance, please contact Hager customer service through their official channels. When contacting support, please have your model number (145676) and purchase details readily available.

Výrobce: Společnosti Hager