Uživatelská příručka k čističce vody KENT Super Plus RO

1. Úvod

The KENT Super Plus RO Water Purifier is designed to provide 100% pure and safe drinking water through its advanced multiple purification process. This system combines RO (Reverse Osmosis), UF (Ultra Filtration), and TDS (Total Dissolved Solids) Control to remove dissolved impurities such as arsenic, rust, pesticides, and fluorides, while also eliminating bacteria and viruses. The integrated TDS control system allows for adjustment of the purified water's TDS level, ensuring essential natural minerals are retained for healthier drinking water.

Image: KENT Super Plus RO Water Purifier, showcasing its sleek design and internal components.

2. Bezpečnostní pokyny

Před použitím spotřebiče si pečlivě přečtěte všechny bezpečnostní pokyny, abyste předešli zranění nebo poškození. Uschovejte si tento návod pro budoucí použití.

• Ujistěte se, že napájecí zdroj odpovídá specifikacím uvedeným na štítku produktu.
• Neponořujte spotřebič, kabel ani zástrčku do vody nebo jiných kapalin.
• Unplug the purifier from the power outlet when not in use, before cleaning, or during maintenance.
• Do not operate the appliance with a damaged cord or plug, or if it has been dropped or damaged in any manner.
• Během provozu udržujte děti mimo dosah spotřebiče.
• Install the purifier in a location away from direct sunlight, heat sources, and corrosive chemicals.
• Zajistěte řádné větrání kolem jednotky.
• Only use genuine KENT spare parts for replacement to ensure optimal performance and safety.

3. Obsah balení

Po vybalení se prosím ujistěte, že jsou všechny níže uvedené položky přítomny a nepoškozené:

• Main Unit (KENT Super Plus RO Water Purifier)
• Záruční list
• Uživatelská příručka (tento dokument)

Note: A pre-filter is not included with this package and may need to be purchased separately depending on your water source quality.

4. Nastavení a instalace

The KENT Super Plus RO Water Purifier is designed for wall-mounted installation. Professional installation is recommended to ensure proper functioning and adherence to safety standards.

4.1 Výběr místa

• Choose a flat, stable wall surface near a water supply and a power outlet.
• Ensure adequate space around the unit for maintenance and air circulation.
• Avoid direct sunlight or areas prone to extreme temperatures.

4.2 Kroky instalace (viz výše)view)

1. Mark the drilling points on the wall using the provided template (if applicable).
2. Vyvrtejte otvory a vložte hmoždinky.
3. Mount the purifier securely on the wall.
4. Connect the raw water inlet pipe to the water supply.
5. Connect the purified water outlet pipe to the dispenser tap.
6. Connect the reject water pipe to a drain.
7. Ujistěte se, že všechny spoje jsou bezpečné a bez úniku.
8. Zapojte napájecí kabel do vhodné elektrické zásuvky.

Image: Diagram illustrating the multi-stage purification process including Sediment Filter, Carbon Filter, RO Membrane, TDS Controller, UF Membrane, and Post Carbon Filter, leading to 100% Pure Water.

5. Návod k obsluze

Once installed and connected, the KENT Super Plus RO Water Purifier operates largely automatically.

5.1 První spuštění

1. Turn on the raw water supply.
2. Plug in the power cord. The purifier will begin the purification process.
3. Allow the storage tank to fill completely. The purification process will stop automatically once the tank is full.
4. For the first use, discard the first two full tanks of purified water to flush out any manufacturing residues.

5.2 Dávkování vody

• Place a clean container under the dispenser tap.
• Turn the tap handle to dispense purified water.
• The purifier will automatically start purifying water again as the water level in the storage tank drops.

5.3 Indikátor hladiny vody

The purifier features a water level indicator on the front panel, allowing you to easily monitor the amount of purified water available in the 8-liter storage tank.

The purification capacity of this unit is approximately 15 liters per hour, depending on the input water pressure and TDS levels.

6. Údržba

Regular maintenance is crucial for the optimal performance and longevity of your KENT Super Plus RO Water Purifier.

6.1 Výměna filtru

The purification system relies on various filters and membranes. The lifespan of these components depends on the quality of the input water and usage volume. It is recommended to replace filters and membranes periodically as advised by KENT service personnel or when the water flow rate significantly decreases or taste changes.

• Sediment Filter & Carbon Filter: Typically replaced every 6-12 months.
• RO Membrane & UF Membrane: Typically replaced every 1-2 years, or as needed.
• Post uhlíkový filtr: Typically replaced every 6-12 months.

Always use genuine KENT replacement parts. Contact authorized service centers for filter replacement.

6.2 Čištění jednotky

• Unplug the purifier before cleaning.
• Otřete vnější část jednotky měkkým, damp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
• Clean the storage tank periodically by draining and rinsing it.

7. Řešení problémů

If you encounter any issues with your KENT Super Plus RO Water Purifier, refer to the common problems and solutions below. If the problem persists, contact KENT customer support.

8. Specifikace

9. Záruka a podpora

Your KENT Super Plus RO Water Purifier comes with a comprehensive warranty and support package:

• Záruka: 1 year warranty from the date of purchase.
• Extended Service: 3 years extended service free (Terms and Conditions apply).

For any service requests, technical assistance, or to inquire about terms and conditions for extended service, please contact KENT customer support. Ensure you have your product model number (AN_51246) and purchase details ready when contacting support.

Pro více informací můžete navštívit oficiální stránky KENT Store on Amazon.