1. Konec produktuview
This manual provides instructions for the SINGER Foot Controller and Power Cord, Model 359102001. This unit serves as a combined foot pedal and power supply for compatible SINGER sewing machines, enabling control over sewing speed and providing electrical power.
1.1. Klíčové vlastnosti
- Integrated foot controller and power cord.
- Genuine SINGER replacement part.
1.2. Compatible SINGER Sewing Machine Models
This foot controller and power cord is compatible with the following SINGER sewing machine models:
- Zpěvák 1105
- Zpěvák 1116
- Zpěvák 1120
- Zpěvák 1130
- Zpěvák 118
- Zpěvák 1525
- Zpěvák 1725
- Zpěvák 1748
- Zpěvák 2639
- Zpěvák 2662
- Zpěvák 2712
- Zpěvák 2722
- Zpěvák 2732
- Zpěvák 2718
- Zpěvák 2724
- Zpěvák 2730
- Singer 3116 Simple
- Zpěvák 3709
- Zpěvák 3722
- Zpěvák 3810
- Zpěvák 3820
- Zpěvák 3825
- Zpěvák 3962
- Zpěvák 4102
- Singer 4205 Inspiration
- Singer 4206 Inspiration
- Singer 4210 Inspiration
- Singer 4212 Inspiration
- Singer 4220 Inspiration
- Singer 4228 Inspiration
- Zpěvák 6510
- Zpěvák 6550
- Zpěvák 7312
- Zpěvák 7322
- Zpěvák 7350
- Singer 14T98DS
2. Pokyny k nastavení
Follow these steps to properly connect the foot controller and power cord to your SINGER sewing machine.
2.1. Connecting the Foot Controller to the Sewing Machine
- Identifikace portu konektoru: Locate the power and foot controller input port on your SINGER sewing machine. This port typically has three holes designed to receive the three-pin connector of the foot controller.
- Zarovnejte konektor: Take the three-pin connector end of the foot controller cord. Carefully align the three pins with the corresponding holes in the sewing machine's input port. Ensure the connector is oriented correctly to avoid bending the pins.
- Vložte konektor: Gently push the connector firmly into the port until it is fully seated. Do not force the connection.
Image: Three-pin connector for the sewing machine input.
Image: Connector dimensions for proper fit.
2.2. Connecting to Power Outlet
- Ensure Machine is Off: Before plugging into a power outlet, ensure your sewing machine's power switch is in the OFF position.
- Zapojte do zásuvky: Insert the two-prong power plug into a standard electrical wall outlet. Ensure the outlet provides the correct voltage (120V AC for North American models).
Image: Power plug with voltage specifikace.
Image: Complete foot controller and power cord assembly.
Image: SINGER Foot Controller and Power Cord.
3. Návod k obsluze
Once the foot controller is properly connected, you can begin operating your sewing machine.
3.1. Controlling Sewing Speed
- Zapnout stroj: Flip the power switch on your sewing machine to the ON position. The machine's light may illuminate.
- Aplikujte tlak: Place your foot on the foot pedal. The sewing machine's speed is directly controlled by the amount of pressure you apply to the pedal.
- Zvýšit rychlost: Press down gently for slower speeds. Increase pressure for faster sewing speeds.
- Přestat šít: Release pressure from the pedal to stop the machine.
4. Péče a údržba
Proper care ensures the longevity and reliable performance of your foot controller.
- Čištění: Wipe the foot controller and cord with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no liquids enter the pedal mechanism.
- Skladování: When not in use, store the foot controller and cord in a clean, dry place, away from direct sunlight and extreme temperatures. Avoid kinking or tightly wrapping the cord.
- Inspekce: Periodically inspect the cord for any signs of damage, such as fraying, cuts, or exposed wires. If damage is observed, discontinue use and replace the unit.
5. Řešení problémů
If you encounter issues with your foot controller, refer to the following common problems and solutions.
5.1. Sewing Machine Does Not Power On
- Zkontrolujte připojení: Ensure the three-pin connector is fully inserted into the sewing machine's port and the power plug is securely in the wall outlet.
- Ověřte napájení: Test the wall outlet with another appliance to confirm it is receiving power. Check your home's circuit breaker if necessary.
- Machine Power Switch: Confirm the sewing machine's power switch is in the ON position.
5.2. No Speed Control or Machine Runs at Full Speed
- Pedal Functionality: Ensure the foot pedal mechanism moves freely and returns to its resting position when pressure is released.
- Internal Issue: If the machine consistently runs at full speed or has no speed variation despite pedal pressure, there may be an internal issue with the foot controller or the sewing machine itself. Consider contacting SINGER customer support or a qualified technician.
5.3. Intermittent Power or Operation
- Poškození kabelu: Inspect the entire length of the power cord and foot controller cord for any visible damage, such as cuts, kinks, or exposed wiring. Damaged cords can cause intermittent power.
- Uvolněná připojení: Re-seat all connections, ensuring they are firm and secure.
6. Specifikace produktu
| Specifikace | Detail |
|---|---|
| Značka | ZPĚVÁK |
| Číslo modelu | 359102001 |
| Rozměry produktu | 6.1 x 4.7 x 2.1 palce |
| Hmotnost položky | 10.6 unce |
| Materiál | Plast |
| Výrobce | Zpěvák |
| ASIN | B002L2Z73A |
| UPC | 798804837419, 037431889041 |
| Jsou vyžadovány baterie | Žádný |
7. Záruka a podpora
For warranty information or technical support regarding your SINGER Foot Controller and Power Cord, please refer to the documentation included with your original sewing machine or visit the official SINGER webmísto.
You can also contact SINGER customer service directly for assistance with product-specific inquiries or troubleshooting beyond the scope of this manual.
