Návod k obsluze hlavního schodišťového osvětlení Miboxer BS64 s 2vodičovým PLC

Zavedení

The Miboxer BS64 2 Wire PLC Stair Light Master is an advanced controller designed for smart stair lighting systems. It supports two-wire power line communication (PLC) and offers flexible control options via Bluetooth and 2.4G RF, including integration with the Tuya Smart App. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your BS64 controller.

Bezpečnostní informace

• Před instalací nebo údržbou se ujistěte, že je odpojeno napájení, abyste předešli úrazu elektrickým proudem.
• This device operates on DC24V. Verify your power supply matches this requirement.
• Instalaci by měl provést kvalifikovaný elektrikář nebo by měla být provedena v souladu s místními elektrotechnickými předpisy.
• Do not expose the device to moisture or extreme temperatures outside its operating range (-10~40℃).
• Ensure proper wiring connections as per the diagrams to prevent damage to the controller or LED strips.
• The device supports short circuit protection and anti-reverse polarity protection, but incorrect wiring can still cause issues.

Vlastnosti

• Bluetooth ovládání
• Dvoudrátové ovládání
• Unese až 64 schodů
• Nastavení doby kroku podpory
• Podpora nastavení času zpoždění vypnutí světel
• Podpora nastavení jasu nočního světla
• Podpora nastavení pracovní doby 0-24 hodin, zabraňuje falešnému spouštění
• 4 režimy snímání světla
• Podpora nastavení parametrů SPI pásku, kalibrace barev, nastavení bodů, nastavení barev a jasu
• Podpora nastavení CCT a jasu schodišťových světel
• Podpora ochrany proti zkratu, ochrana proti přepólování

Specifikace

Image: Miboxer BS64 Product Parameters and Dimensions. This image details the specifications in a table format and provides physical dimensions of the controller and sensors.

Obsah balení

Po otevření balíčku byste měli najít následující položky:

• Miboxer BS64 Stair Light Master Controller
• Návod k použití (tento dokument)
• PIR Sensor A
• PIR Sensor B
• Connecting Wires (various types for power and sensors)

Image: Miboxer BS64 Package Contents. This image displays the controller, sensors, wiring, and manual included in the box.

Nastavení

1. Zapojení kabeláže

The Miboxer BS64 controller supports 2-wire PLC for stair lighting. The wiring configuration depends on the number of stairs and the power supply location. Always ensure power is off before making any connections.

Option 1: Up to 24 Stairs

For stair steps up to 24, power can be supplied from the first or last step. Use 1.5mm² cable for connections.

Image: Connection Diagram for up to 24 stairs. This diagram illustrates wiring for a system with up to 24 LED strips, showing input DC24V, PUSH Switch, SPI LED strip connections, and Sensor A and B placement.

Option 2: 25-36 Stairs

For stair steps between 25 and 36, power supplies should be connected from the middle of the staircase. Use 1.5mm² cable for connections.

Image: Connection Diagram for 25-36 stairs. This diagram shows the wiring for 25-36 LED strips, with power input from the middle of the strip run, along with sensor and switch connections.

Option 3: 37-64 Stairs

For stair steps between 37 and 64, power supplies should also be connected from the middle of the staircase. Use 2.5mm² cable for connections to accommodate higher power draw.

Image: Connection Diagram for 37-64 stairs. This diagram illustrates the wiring for 37-64 LED strips, similar to the 25-36 stair option but specifying 2.5mm² cable for power.

2. Sensor and Switch Installation

• Connect Sensor A and Sensor B to their respective ports on the controller.
• Install the PUSH Switch (purchased separately) to the designated terminals.
• Position Sensor A at the top of the stairs and Sensor B at the bottom, ensuring they have a clear line of sight for motion detection. The PIR sensing distance is 3m.

3. Initial Power-Up and Pairing

Once all wiring is complete and checked, connect the DC24V power supply.

Image: Miboxer BS64 Controller with Connection Details. This close-up shows the input/output terminals, link button, and QR code for app download, along with key specifications.

• Párování dálkového ovladače: Short press the 'Link' button on the controller for 1 second to activate the link mode for a remote control (remote purchased separately).
• PIR Sensor Pairing: Long press the 'Link' button on the controller for 3 seconds. The PIR sensor link is successful when the light flashes 3 times slowly.
• Integrace chytré aplikace Tuya: The device works with the Tuya Smart App. Scan the QR code on the controller or search for 'Tuya Smart' in your app store to download. Follow the in-app instructions to add and configure your device.

Image: Tuya Smart App Control Illustration. This image shows a smartphone displaying the Tuya Smart App interface controlling the Miboxer BS64 controller.

Návod k obsluze

App Control (Tuya Smart App)

Once paired with the Tuya Smart App, you can access a wide range of settings and control options:

• Step Time Setting: Adjust the duration each step light remains on.
• Delay Lights-Off Time Setting: Configure the delay before the lights turn off after motion is no longer detected.
• Night Light Brightness Setting: Set the brightness level for ambient night lighting.
• Nastavení pracovní doby: Define specific 0-24 hour periods for the system to be active, preventing false triggering during unwanted times.
• Light Sensing Modes: Choose from 4 different light sensing modes to suit your environment and preferences.
• SPI Strip Parameter Setting: For SPI LED strips, configure parameters such as color calibration, point setting, and overall color and brightness.
• CCT and Brightness Setting: Adjust the Correlated Color Temperature (CCT) and brightness of the staircase lights.

Bluetooth / 2.4G RF Control

If you have a compatible Miboxer remote control, you can use it to control basic functions of the stair lights after pairing. Refer to your remote control's manual for specific button functions.

Údržba

• Keep the controller and sensors clean and free from dust. Use a soft, dry cloth for cleaning.
• Nepoužívejte drsné chemikálie ani abrazivní čisticí prostředky.
• Pravidelně kontrolujte kabeláž, zda nevykazuje známky opotřebení nebo uvolnění.
• Ensure the PIR sensors are unobstructed for optimal performance.

Odstraňování problémů

• Světla se nerozsvěcují: Check power supply, wiring connections, and ensure sensors are properly installed and unobstructed. Verify app settings for working hours.
• Lights not responding to motion: Ensure PIR sensors are correctly positioned and paired. Check for obstructions. Adjust sensor sensitivity in the app if available.
• Problémy s připojením k aplikaci: Ensure Bluetooth is enabled on your device. Restart the app and the controller. Check your Wi-Fi connection if using a Tuya gateway.
• Incorrect light behavior: Review SPI strip parameters, color calibration, and CCT/brightness settings in the Tuya Smart App.
• Controller indicator light not flashing during pairing: Ensure the 'Link' button is pressed for the correct duration (1s for remote, 3s for PIR sensor).

Tipy pro uživatele

• For optimal motion detection, avoid placing PIR sensors near heat sources or direct sunlight, which can cause false triggers.
• Experiment with different step time and delay settings in the app to find what works best for your staircase and usage patterns.
• Utilize the 0-24 hours working time setting to conserve energy and prevent unnecessary activation during daylight hours or when the area is typically unoccupied.

Záruka a podpora

The Miboxer BS64 Stair Light Master comes with a warranty of more than 3 years. For technical support, warranty claims, or further assistance, please contact your retailer or the manufacturer's customer service. Keep your purchase receipt as proof of purchase.