MJX 7303

Návod k obsluze RC rallyového vozu MJX HYPER GO 7303 v měřítku 1/7

Model: 7303

1. Úvod

Thank you for choosing the MJX HYPER GO 7303 1/7 RC Rally Car. This high-performance, brushless, remote-controlled vehicle is designed for enthusiasts seeking an exhilarating off-road and rally racing experience. This manual provides essential information for the safe operation, maintenance, and optimal performance of your RC car. Please read it thoroughly before use.

MJX HYPER GO 7303 RC Rally Car with key components

Figure 1.1: MJX HYPER GO 7303 RC Rally Car and its main electronic components.

2. Bezpečnostní opatření

  • This product is not suitable for children under 14 years of age. Adult supervision is recommended for younger users.
  • Vždy řiďte RC auto v otevřeném prostoru, mimo dosah lidí, domácích zvířat a překážek.
  • Nepracujte v blízkosti veřejných komunikací, elektrického vedení nebo vodních ploch.
  • Před použitím se ujistěte, že jsou všechny součásti bezpečně upevněny.
  • Battery and charger are not included. Use only recommended batteries and chargers to avoid fire hazards or damage.
  • Vyhněte se dlouhodobému vystavení přímému slunečnímu záření nebo extrémním teplotám.

3. Specifikace

Specifications table for MJX HYPER GO 7303 RC Rally Car

Obrázek 3.1: Podrobné specifikace produktu.

MJX HYPER GO 7303 Key Specifications
FunkceDetail
Číslo modelu7303
Měřítko1/7
Max Speed (4S)Approximately 60 KM/H
Vzdálená vzdálenostPřibližně 150m
Rozměry (D*Š*V)632 * 290 * 237 mm
Rozvor kol375 mm
Šířka stopy265 mm
Hmotnost vozidla4943 g
Motor3974-2500KV Hall-sensor Brushless Motor
ESC120A Independent Brushless ESC
Servo35kg Metal Gear Servo
GyroskopG3C Gyro
PřijímačWaterproof Receiver Box
Dálkový ovladač2.4 G 3CH
Baterie dálkového ovladače4 * AA (není součástí dodávky)
Doporučená baterie4S 5000mAh (not included)
MateriálMetal, Plastic (PC Car Shell)
Doporučený věk14+ let
Balení obsahujeCar Body (battery not included), Remote Controller, Instruction Manual, 4 Wheels, Hex Wrench Set

4. Průvodce nastavením

4.1 Vybalení a počáteční kontrola

  1. Opatrně vyjměte všechny součásti z obalu.
  2. Verify that all items listed in the 'Package Includes' section are present.
  3. Zkontrolujte vůz, zda nevykazuje viditelné poškození způsobené přepravou.

4.2 Instalace baterie (auto)

The MJX HYPER GO 7303 requires a 4S 5000mAh battery (not included). The car features an adjustable battery compartment.

  1. Vyhledejte přihrádku na baterii na šasi.
  2. Adjust the compartment size if necessary to fit your battery securely.
  3. Insert the charged 4S battery into the compartment.
  4. Connect the battery to the ESC's power connector. Ensure correct polarity.
  5. Zajistěte kryt přihrádky na baterie.
Battery compartment and recommended battery for RC car

Figure 4.1: Adjustable battery compartment and recommended 4S 5000mAh battery.

4.3 Nastavení dálkového ovladače

The T3D remote controller requires 4 AA batteries (not included).

  1. Otevřete přihrádku na baterie na zadní straně dálkového ovladače.
  2. Insert 4 AA batteries, observing correct polarity.
  3. Zavřete přihrádku na baterie.
  4. Familiarize yourself with the controller layout:
T3D Remote Controller diagram with labeled functions

Figure 4.2: T3D Remote Controller functions. Key controls include: LED (Light Switch Control), ST.REV (Steering Reverse), TH.TRIM (Throttle Neutral Trim), ST.TRIM (Steering Servo Trim), Power Switch, TH.D/R (Throttle Dual Rate), CH1: ST (Steering), CH2: TH (Throttle), TH.REV (Throttle Reverse).

4.4 Binding the Remote Controller and Car

Your car and remote controller should be pre-bound from the factory. If re-binding is necessary, refer to the specific instructions in the included operating manual.

5. Návod k obsluze

5.1 Zapnutí

  1. Turn on the remote controller first.
  2. Poté zapněte vypínač na RC autě.
  3. Wait for the indicator lights on both the controller and car to show a stable connection.

5.2 Základní ovládací prvky

  • Throttle (CH2: TH): Pull the trigger towards you to accelerate forward. Push the trigger away from you to brake, and push further to engage reverse.
  • Steering (CH1: ST): Turn the steering wheel left or right to control the car's direction.
  • Ořízne: Use ST.TRIM and TH.TRIM to fine-tune steering and throttle neutral positions if the car doesn't drive straight or stops when the trigger is at neutral.
  • Dual Rate (TH.D/R): Adjust the maximum throttle output. Lowering this can make the car easier to control for beginners.
  • LED světla: Use the LED switch control on the remote to turn the car's lights on or off. The car features a full car linkage lighting system.
MJX HYPER GO 7303 RC Rally Car with front and rear lights illuminated

Figure 5.1: The car's full linkage lighting system in action.

5.3 Tipy pro řízení

  • Start with low speeds to get a feel for the controls before attempting high-speed maneuvers.
  • Procvičte si řízení a ovládání plynu v otevřeném prostoru.
  • Be mindful of the remote control range (approx. 150m) to avoid losing control.

6. Údržba

6.1 Obecné čištění

  • After each use, especially in dusty or dirty conditions, clean the car thoroughly.
  • K odstranění nečistot a úlomků z podvozku, kol a součástí zavěšení použijte měkký kartáč nebo stlačený vzduch.
  • Otřete tělo reklamouamp tkanina. Vyhněte se používání agresivních chemikálií.

6.2 Péče o baterii a její skladování

Warm reminder for battery storage

Figure 6.1: Important battery storage guidelines.

  • Always store batteries at approximately half charge (storage voltage) to prolong their lifespan.
  • Store batteries in a cool, dry place with minimal temperature fluctuations.
  • If not used for an extended period (e.g., 3 months), perform a charge and discharge cycle to maintain battery health.
  • Nikdy nenechávejte nabíjené baterie bez dozoru.

6.3 Kontrola součásti

Regularly inspect the following components for wear, damage, or loose connections:

  • Hnací ústrojí: Check metal drive shafts, CVDs, and powder metallurgy gears for smooth operation and wear.
  • Suspenze: Inspect metal hydraulic shocks and metal arms for leaks or damage.
  • Ložiska: Ensure all full car bearings are clean and spinning freely.
  • Elektronika: Check all wiring connections to the motor, ESC, servo, and receiver. Ensure the waterproof receiver box is sealed.
  • Pneumatiky: Inspect tires for wear and ensure they are securely mounted. The car comes equipped with two sets of tires for different terrains.
Diagram of metal drivetrain components including drive shafts, chassis, CVDs, and gears

Figure 6.2: Illustration of the car's durable metal components, including drive shafts, chassis, CVDs, and powder metallurgy gears.

Diagram of metal suspension components including arms, sealed differentials, hydraulic shocks, and bearings

Figure 6.3: Illustration of the car's metal suspension components, including arms, three sealed metal differentials, metal hydraulic shocks, and full car bearings.

7. Řešení problémů

  • Auto nereaguje: Ensure both the remote controller and car are powered on and batteries are charged. Check for a stable connection (binding).
  • Poor steering/throttle response: Check remote controller batteries. Adjust ST.TRIM and TH.TRIM settings. Inspect servo and linkages for damage.
  • Snížená rychlost/výkon: Battery may be low. Check battery connections. Inspect motor and ESC for overheating or damage.
  • Neobvyklé zvuky: Stop operation immediately. Inspect gears, bearings, and drivetrain for foreign objects or damage.
  • Světla nefungují: Check LED switch on the remote. Inspect wiring to the light system.

8. Uživatelské tipy

  • Doba vloupání: For the first few runs, operate the car at moderate speeds to allow the motor and other components to break in properly.
  • Správa baterie: Invest in multiple batteries to extend your run time. Always allow batteries to cool before recharging.
  • Náhradní díly: Consider having common spare parts like gears, drive shafts, and suspension components on hand for quick repairs.
  • Environmentální povědomí: Be mindful of the environment you're driving in. Avoid excessively wet or muddy conditions to protect electronics, even with the waterproof receiver box.

9. Záruka a podpora

For warranty information, technical support, or replacement parts, please contact the seller or manufacturer directly. Keep your proof of purchase for any warranty claims.

Související dokumenty - 7303

Předview Uživatelská příručka k RC vysokorychlostnímu autu MJX HYPER GO 1:7 V2.0
Komplexní uživatelská příručka pro RC vysokorychlostní auto MJX HYPER GO 1:7 (V2.0). Zahrnuje bezpečnostní varování, opatření týkající se baterie, návod k obsluze, podrobné kroky montáže všech komponent a kompletní seznam náhradních dílů. Obsahuje informace o shodě s FCC.
Předview Uživatelská příručka k vodotěsnému bezkartáčovému regulátoru otáček (verze RTR)
Uživatelská příručka pro vodotěsný bezkartáčový regulátor otáček (verze RTR) ESC. Zahrnuje funkce, specifikace, nastavení, programování, kalibraci, řešení problémů a volitelné příslušenství pro RC auta a nákladní vozy.
Předview Uživatelská příručka k RC vysokorychlostnímu autu MJX 1:14 Hyper Go
Uživatelská příručka pro RC vysokorychlostní auto MJX 1:14 Hyper Go, s podrobným popisem obsluhy, bezpečnostních opatření, montáže součástí a náhradních dílů.
Předview AMEWI Hyper Go Citroen C3 WRC 1:14 RTR RC auto Návod k obsluze
Komplexní návod k obsluze pro dálkově ovládané auto AMEWI Hyper Go Citroen C3 WRC 1:14 RTR. Zahrnuje bezpečnost, manipulaci s baterií, provoz, technické specifikace a obsah balení. Obsahuje podrobné pokyny k nastavení a použití.
Předview Benutzerhandbuch: Wasserfester Brushless ESC (verze RTR) – funkce, data a programování
Umfassende Anleitung für den wasserfesten Brushless ESC (verze RTR). Erfahren Sie mehr über Funktionen, technische Daten, Erstinstallation, Kalibrierung and Programmierung dieser leistungsstarken Regler für RC-Fahrzeuge.
Předview Uživatelská příručka k RC vysokorychlostnímu autu MJX Hyper Go 14303
Komplexní uživatelská příručka pro RC vysokorychlostní auto MJX Hyper Go 14303, která poskytuje podrobné pokyny k nastavení, provozu, bezpečnosti, údržbě a identifikaci dílů pro optimální výkon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.