1. Úvod
This manual provides detailed instructions for the installation, operation, and maintenance of your Miboxer WiFi+2.4G LED Controller. These controllers are designed to provide intelligent control over various LED strip types, including Single Color, Dual White (CCT), RGB, RGBW, and RGB+CCT, through WiFi, 2.4G RF remote, and voice control.
The Miboxer LED controllers support the Tuya Smart app, enabling advanced features such as music rhythm, scene customization, timing, and group control. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
2. Bezpečnostní informace
- Zajistěte vstupní objtage matches the controller's specifications (DC12-24V or DC12-48V depending on model).
- Nevystavujte zařízení vlhkosti nebo extrémním teplotám.
- Před instalací nebo údržbou vždy odpojte napájení.
- Pro složité elektroinstalace se doporučuje profesionální instalace.
- Uchovávejte mimo dosah dětí.
3. Varianty produktu
Miboxer offers several models of WiFi+2.4G LED controllers, each designed for specific LED strip configurations:
- FUT035W+ (2-in-1 LED Strip Controller): Supports Single Color / Dual White (CCT) output modes.
- FUT037W+ (3-in-1 LED Strip Controller): Supports RGB / RGBW / RGB+CCT output modes.
- WL5 (WiFi 5-in-1 LED Strip Controller): A versatile controller supporting CCT, DIM, RGB, RGBW, and RGB+CCT output modes.
4. Nastavení a instalace
4.1 Pokyny pro zapojení
Ensure power is disconnected before performing any wiring. Connect your LED strips and power supply according to the diagrams below for your specific controller model.
FUT035W+ (2-in-1 Controller) Wiring
This controller supports Single Color and Dual White (CCT) LED strips. Connect the positive (+) and negative (-) terminals from your power supply to the INPUT V+ and V- terminals on the controller. Connect your LED strip to the OUTPUT terminals as follows:
- Jedna barva: Connect the positive (+) of the strip to V+ and the negative (-) to W or CW.
- Dual White (CCT): Connect the common positive (+) of the strip to V+, the Warm White (WW) line to WW, and the Cold White (CW) line to CW.
FUT037W+ (3-in-1 Controller) Wiring
This controller supports RGB, RGBW, and RGB+CCT LED strips. Connect the positive (+) and negative (-) terminals from your power supply to the INPUT V+ and V- terminals on the controller. Connect your LED strip to the OUTPUT terminals as follows:
- RGB: Connect the common positive (+) of the strip to V+, and R, G, B lines to R, G, B terminals respectively.
- RGBW: Connect the common positive (+) of the strip to V+, and R, G, B, W lines to R, G, B, W terminals respectively.
- RGB+CCT: Connect the common positive (+) of the strip to V+, and R, G, B, CW, WW lines to R, G, B, CW, WW terminals respectively.
WL5 (5-in-1 Controller) Wiring
The WL5 is a universal controller supporting Single Color, Dual White (CCT), RGB, RGBW, and RGB+CCT LED strips. Connect the positive (+) and negative (-) terminals from your power supply to the INPUT V+ and V- terminals on the controller. Connect your LED strip to the OUTPUT terminals according to its type.
4.2 Instalace a párování aplikace
- Stáhněte si aplikaci Tuya Smart: Scan the QR code on your controller or search for "Tuya Smart" in your mobile app store.
- Připojení k WiFi: The controllers feature a WiFi + Bluetooth dual module design. Ensure your mobile device is connected to a 2.4GHz WiFi network.
- Activate WiFi Pairing Mode: Long press the 'SET' button on the controller for 3 seconds until the indicator flashes quickly.
- Přidat zařízení do aplikace: Open the Tuya Smart app, follow the on-screen instructions to add a new device. The app will guide you through the pairing process.
4.3 Remote Control Linking (Optional)
To link a 2.4G RF remote control (e.g., FUT007, FUT089, FUT092):
- Ujistěte se, že je ovladač zapnutý.
- Press the 'SET' button on the controller 1 time to activate linking mode.
- Within a few seconds, press the desired zone button on your Mi-Light 2.4G RF remote. The LED strip should flash to confirm successful linking.
5. Návod k obsluze
5.1 Ovládání pomocí aplikace Tuya Smart
Once paired, use the Tuya Smart app to control your LED strips. The app provides comprehensive control options:
- Úprava barev: Select from 16 million colors (for RGB/RGBW/RGB+CCT models).
- Ovládání jasu: Stepless dimming for smooth transitions.
- Nastavení teploty barev: Adjust from warm white to cool white (for CCT/RGB+CCT models).
- Music Rhythm Function: Lights automatically change color along with music.
- Přizpůsobení scény: Create and save custom lighting scenes (e.g., "Good night," "Reading," "Work").
- biorytmus: Set the state of lights according to the change of sun during one day.
- Sleep/Wake Up Plan: Fade in/out lighting for a natural sleep/wake cycle.
- Nastavení časování: Naplánujte si zapínání/vypínání světel v konkrétní časy.
- Ovládání skupiny: Control multiple lamps of the same type simultaneously.
- Sdílení zařízení: Share control of devices with family members.
- Režim Nerušit: When the light is turned off, it needs to be powered on 2 times before the light will light up (suitable for areas with frequent power outages to save energy).
- Tap-to-Run / Automation: Set up ambiances and build smart home automations.
- Dynamic Mode Sheet Switching: Switch between various dynamic lighting modes.
5.2 Hlasové ovládání
The controllers support third-party voice control platforms such as Amazon Alexa and Google Assistant. Link your Tuya Smart account to your preferred voice assistant app and use voice commands to control your lights.
5.3 2.4G RF dálkové ovládání
Use a compatible Mi-Light 2.4G RF remote for direct control within a 30m range. Features include:
- Úprava barev.
- Úprava jasu.
- Nastavení teploty barev.
- Přepínání režimů.
Signal Transmitting: One lighting fixture can transmit signals from the remote to another lighting fixture within 30m, effectively extending the control distance.
Modes Synchronization: Different lighting fixtures can work synchronously when controlled by the same remote, under the same dynamic mode, and within a 30m distance.
5.4 DMX512 Controllable (for RGB+CCT output mode)
For RGB+CCT output mode, the controller can be integrated with DMX512 systems. This requires an additional DMX512 LED transmitter.
6. Údržba
- Udržujte ovladač čistý a bez prachu. K čištění používejte měkký, suchý hadřík.
- Vyhněte se používání agresivních chemikálií nebo abrazivních čisticích prostředků.
- Zajistěte dostatečné větrání kolem regulátoru, aby nedošlo k jeho přehřátí.
- Pravidelně kontrolujte kabeláž, zda nevykazuje známky opotřebení nebo uvolnění.
7. Řešení problémů
- Lights not responding to app/remote:
- Zkontrolujte, zda je ovladač zapnutý.
- Verify WiFi connectivity of the controller and your mobile device.
- Ujistěte se, že je dálkový ovladač správně propojen s ovladačem.
- Zkontrolujte baterii v dálkovém ovladači.
- Restart the controller by cycling its power.
- Incorrect color or mode:
- Ensure the correct output mode is selected on the controller (if applicable, by pressing the 'SET' button continuously).
- Verify that the LED strip type matches the controller's capabilities (e.g., RGB strip with an RGB controller).
- Blikající světla:
- Zkontrolujte napájení objtage and current capacity to ensure it meets the LED strip's requirements.
- Zkontrolujte kabeláž, zda není uvolněná.
- Ensure the PWM frequency setting is appropriate (high frequency 16kHz or low frequency 250Hz can be switched).
8. Specifikace
| Funkce | FUT035W+ (2-in-1) | FUT037W+ (3-in-1) | WL5 (5-in-1) |
|---|---|---|---|
| Název produktu | 2 in 1 LED Strip Controller (WiFi+2.4G) | 3 in 1 LED Strip Controller (WiFi+2.4G) | WiFi 5v1 LED páskový ovladač |
| Model č. | FUT035W+ | FUT037W+ | WL5 |
| Vstupní objemtage | DC12-24V | DC12-48V | DC12-24V |
| Výstupní proud | Max 12A (6A/Channel) | Max 12A (6A/Channel) | Max 15A (6A/Channel) |
| Komunikační protokol | WiFi+2.4GHz | ||
| 2.4G RF ovládání vzdálenosti | 30 m | ||
| Pracovní teplota | -10~40°C | -10~40°C | -20~60°C |
| WiFi standard | IEEE 802.11b/g/n 2.4 GHz | ||
| Protokol Bluetooth | Bluetooth 4.2 (low power consumption) | ||
| Materiál | ABS | ||
| Osvědčení | CCC, ROHS, CE | ||
| Rozměry (D x Š x V) | 74.5 mm x 38 mm x 17 mm | 74.5 mm x 38 mm x 17 mm | 124 mm x 38 mm x 23 mm |
9. Uživatelské tipy
- For optimal WiFi performance, ensure your router is within a reasonable range and operating on the 2.4GHz band.
- When setting up complex scenes or automations, test them thoroughly to ensure they function as expected.
- Consider using the group control feature in the Tuya Smart app for managing multiple LED strips efficiently.
- If experiencing connectivity issues, try resetting the controller's WiFi pairing mode and re-adding it to the app.
10. Záruka a podpora
This product comes with a 2-year warranty from the date of purchase. The warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
S dotazy ohledně technické podpory nebo záruky se prosím obraťte na svého prodejce nebo zákaznický servis výrobce.
