MiBoxer AC Triac Dimmer Instruction Manual

1. Úvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of the MiBoxer AC Triac Dimmer series. These dimmers are designed to control traditional incandescent lamps, halogen lamps a stmívatelné LED lamps, offering versatile control options including RF remote, push switch, smartphone application, and voice control. Please read this manual carefully before installation and use to ensure proper function and safety.

This image displays the three models: TRI-C1 (2.4G RF + Push Control), TRI-C1WR (WiFi + 2.4G + Push), and TRI-C1ZR (Zigbee 3.0 + 2.4G + Push). It also indicates the 2.4G RF control distance: 30m for TRI-C1/TRI-C1WR and 100m (open area) for TRI-C1ZR.

2. Klíčové vlastnosti

The MiBoxer AC Triac Dimmers offer advanced features for smart lighting control:

• Supports control of traditional incandescent lamps, halogen lamps, and triac dimmable LED lamps.
• Trailing edge phase-cut technology for smooth dimming.
• 0-100% stepless dimming with no flicker.
• Built-in temperature detecting switch for over-heat and over-loading protection.
• Lowest brightness setting function.
• Screw connector for reliable and easy installation.
• Anti-fire PC shell for enhanced safety.
• Supports "Power on do not disturb" mode.
• Auto transmitting function for extended control distance (unlimited when multiple dimmers are linked).

Specifické vlastnosti modelu:

• TRI-C1: 2.4G RF wireless remote control and Push dimming function.
• TRI-C1WR: WiFi + Bluetooth + 2.4G wireless transmission technology. Supports Smartphone APP control (Tuya Smart), Amazon Alexa, and Google Home voice control.
• TRI-C1ZR: Zigbee 3.0 standard protocol + 2.4G wireless transmission technology. Supports Smartphone APP control (requires Zigbee 3.0 gateway), Philips Hue, Amazon Alexa, and Google Home voice control.

3. Specifikace

This image shows the side and top views of the dimmer with dimensions (49mm x 49mm x 25mm) and indicates the position of the SET button and indicator light.

4. Instalace

4.1 Bezpečnostní opatření

• Před instalací vždy vypněte napájení, abyste předešli úrazu elektrickým proudem.
• Zajistěte vstupní objtage matches the device requirements (AC100~240V~ 50/60Hz).
• Do not disassemble the device if you are not an expert; improper handling may cause damage.
• Avoid installing the dimmer in areas with strong electromagnetic interference, as this can affect remote control distance.
• The dimmer is not suitable for use in humid environments.

4.2 Schéma připojení

The connection diagram below illustrates how to wire the AC Triac Dimmer. Ensure all cables are connected correctly before powering on the device to avoid damage.

This diagram shows the input (L, N) and output (N, L1) connections. A PUSH switch is connected to L1 and PUSH DIM terminals. The output connects to triac dimming LED lights, filament lamps nebo halogen lamps. Incorrect wiring can damage the dimmer.

4.3 Fyzická instalace

The dimmer is designed to fit into standard junction boxes. Ensure the junction box has a depth of over 50mm for proper installation behind a push switch.

This image illustrates the dimmer installed within a standard junction box, behind a push switch. It highlights the requirement for a junction box depth exceeding 50mm.

5. Provoz

5.1 Push Dimming Function

• Krátký tisk: A short press of the connected PUSH switch will turn the light ON or OFF.
• Dlouhé stisknutí: A long press of the PUSH switch will initiate stepless dimming. Release and long press again to reverse the dimming direction (increase or decrease brightness).
• Synchronizing Multiple Dimmers: If multiple dimmers are connected to the same self-return switch, long press the switch for 20 seconds until all lights reach 100% brightness to synchronize them. The quantity of dimmers connected to one self-return switch should not exceed 25, and the connection cable length should not exceed 20m.

5.2 Remote Control (2.4G RF)

(Note: 2.4G remotes are sold separately. Refer to Figure 5 for compatible remotes.)

This image displays various MiBoxer 2.4G RF remote controls that can be paired with the dimmer, including models like FUT006, FUT007, B1, K1, etc.

5.2.1 Linking a Remote

To link a remote control to the dimmer:

1. Initiate learning code mode on the dimmer:
   • Metoda 1: Short press the "SET" button on the dimmer once. The indicator light will "breathe" (flash slowly).
   • Metoda 2: Power off the dimmer for 10 seconds, then power it on again.
   • Metoda 3: Short press the connected PUSH switch (ON-OFF).
2. Within 3 seconds of initiating learning code mode:
   • For K1 remote: Press the "SET" button on the K1 remote 3 times.
   • For other remotes: Press any "ON" button in the desired group zone 3 times.

The light will flash 3 times slowly to indicate successful linking.

This image illustrates the steps for linking a K1 remote or other compatible remotes to the dimmer, showing the SET button on the dimmer and the ON button on a remote.

5.2.2 Unlinking a Remote

To unlink a remote control from the dimmer:

1. Initiate learning code mode on the dimmer (using one of the methods described in 5.2.1).
2. Within 3 seconds of initiating learning code mode:
   • For K1 remote: Press the "SET" button on the K1 remote 5 times.
   • For other remotes: Press any "ON" button in the desired group zone 5 times.

The light will flash 10 times quickly to indicate successful unlinking.

This image shows the steps for unlinking a K1 remote or other compatible remotes from the dimmer.

5.2.3 Setting Minimum Brightness (K1 Remote)

This function must be paired with the remote first before setting.

1. Long press the "SET" button on the K1 remote for 3 seconds until the light flashes once, and the indicator goes into flashing status.
2. Short press "SET" to cycle through 10 brightness levels: 3%, 5%, 7%, 9%, 12%, 17%, 22%, 28%, 34%, 40%.
3. Short press the rotating button to confirm the setting, or wait 10 seconds for automatic confirmation. The light will recover to its previous brightness level.

This image details the process of adjusting the minimum brightness level using the K1 remote control.

5.2.4 Funkce automatického přenosu

One dimmer can transmit control signals to another dimmer within 30m. This allows for an unlimited control distance when multiple dimmers are linked. All dimmers must be linked with the same remote for this function to work.

This diagram illustrates how a signal from a remote can be transmitted from one triac dimmer to another within a 30m range, extending the overall control distance.

5.3 Smartphone APP Control (TRI-C1WR & TRI-C1ZR)

The TRI-C1WR and TRI-C1ZR models support smartphone APP control via the Tuya Smart app. (Note: TRI-C1WR uses WiFi, TRI-C1ZR requires a Zigbee 3.0 gateway, sold separately).

5.3.1 Download and Install Tuya Smart App

Hledat "Tuya Smart" in your device's app store (Apple App Store or Google Play Store) or scan the QR code provided in the product packaging/description to download and install the app. Register an account or log in if you already have one.

5.3.2 Pairing Network (TRI-C1WR - WiFi)

(Note: Does not support 5G routers. Ensure your home WiFi network is 2.4GHz.)

1. Connect the dimmer to the power supply.
2. Initiate pairing network mode on the dimmer (factory default is pairing network):
   • Long press the "SET" button for about 3 seconds until the indicator flashes quickly.
   • Alternatively, long press the connected PUSH switch for 10 seconds while the light is OFF (requires the push switch to be wired).
3. Disconnect power from the dimmer, then reconnect it 3 times to ensure it's in pairing mode.
4. Open the Tuya Smart app, click "+" on the top right corner, select "Lighting" then "Light Source (BLE+Wi-Fi)" or similar option, and follow the app prompts to complete configuration.

This image shows the steps for pairing the TRI-C1WR with the Tuya Smart app, including how to put the device into pairing mode and navigate the app interface.

5.3.3 Pairing Network (TRI-C1ZR - Zigbee)

(Note: Requires a Zigbee 3.0 gateway, sold separately, to be added to the Tuya Smart app first.)

1. Connect the dimmer to the power supply.
2. Initiate pairing network mode on the dimmer (factory default is pairing network):
   • Long press the "SET" button for about 3 seconds until the indicator flashes quickly.
   • Alternatively, long press the connected PUSH switch for 10 seconds while the light is OFF (requires the push switch to be wired).
3. Open the Tuya Smart app, navigate to your Zigbee gateway, click "Add subdevice", and confirm "Indicator is flashing quickly".
4. Follow the app instructions to add the device. The app supports dimming and group control.

This image shows the steps for pairing the TRI-C1ZR with the Tuya Smart app via a Zigbee gateway, including adding a subdevice and confirming the flashing indicator.

5.3.4 Setting Lowest Brightness via App (TRI-C1WR & TRI-C1ZR)

If the light turns off when dimming to 1%, you can adjust the lowest brightness setting:

1. In the Tuya Smart app, click "Settings" for the dimmer.
2. Move the brightness slider to set the desired lowest brightness level.

This image displays the Tuya Smart app interface for adjusting the minimum brightness level of the dimmer.

5.3.5 Breaker Mode (ON/OFF Only) (TRI-C1WR & TRI-C1ZR)

In Breaker Mode, the dimmer only supports turning the light ON or OFF; dimming functionality is disabled.

1. In the Tuya Smart app, click "Settings" for the dimmer.
2. Click the toggle button next to "Breaker Mode" to activate or deactivate it.

This image displays the Tuya Smart app interface for enabling or disabling the Breaker Mode, which restricts the dimmer to ON/OFF functionality only.

5.3.6 Philips Hue Control (TRI-C1ZR)

The TRI-C1ZR can be integrated with Philips Hue. Ensure your Zigbee 3.0 gateway is already added to the Tuya Smart app.

1. Connect the dimmer to the power supply.
2. Initiate pairing network mode on the dimmer (long press "SET" for 3 seconds until indicator flashes quickly, or long press push switch for 10 seconds).
3. Open the "Philips Hue" App, click "SETTINGS", then "Lights".
4. Click "+" on the top right corner, then "Search" to find new lights.
5. Click "Start configuration" to complete the setup.

This image shows the steps within the Philips Hue app to add and configure the TRI-C1ZR dimmer.

5.4 Voice Control (TRI-C1WR & TRI-C1ZR)

The TRI-C1WR and TRI-C1ZR models support voice control via Amazon Alexa and Google Home. Ensure the dimmer is already added to the Tuya Smart app (and Zigbee gateway for TRI-C1ZR).

5.4.1 Amazon Alexa Voice Control

(Note: If your Amazon ECHO does not have a built-in Zigbee 3.0 protocol, you will need the Miboxer Zigbee 3.0 gateway for TRI-C1ZR.)

1. Otevřete aplikaci Amazon Alexa.
2. Click "More" on the bottom of the right corner, then "Skills & Games".
3. Hledat "Smart life" and enable the skill.
4. Initiate pairing network mode on the dimmer (long press "SET" for 3 seconds until indicator flashes quickly, or long press push switch for 10 seconds).
5. Say to your Amazon ECHO device: "Alexa, Discover devices".
6. Wait for a while for Alexa to discover the device. Voice control will then be activated.

This image provides a visual guide for setting up Amazon Alexa voice control, including navigating the Alexa app and the "Discover devices" command.

5.4.2 Google Home Voice Control

1. Otevřete aplikaci Google Home.
2. Click "+" on the top left corner.
3. Click "Set up device", then "Works with Google".
4. Hledat "Smart life" and follow the instructions to finish configuration and start voice control.

This image illustrates the steps for setting up Google Home voice control, including navigating the Google Home app and linking the "Smart life" skill.

6. Údržba

• Keep the device dry. Moisture can corrode electronic circuits.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. Wipe with a soft, dry cloth.
• Store the device in a clean, dust-free environment when not in use for extended periods.

7. Řešení problémů

• Light not responding to remote/app: Ensure the dimmer is powered on and correctly wired. Check if the remote is linked (refer to section 5.2.1). For app control, verify the dimmer is paired with the app/gateway and your network is stable (2.4GHz for WiFi models).
• Light flickering or not dimming smoothly: Ujistěte se, že je připojenoamps are dimmable. Check the lowest brightness setting in the app (section 5.3.4) or via remote (section 5.2.3) and adjust if necessary.
• Dimmer not connecting to app/voice assistant: Confirm your WiFi network is 2.4GHz (for TRI-C1WR) or your Zigbee gateway is properly set up and connected (for TRI-C1ZR). Ensure the dimmer is in pairing mode.
• Dimmer only turns ON/OFF, no dimming: Check if "Breaker Mode" is activated in the app (section 5.3.5). Deactivate it if dimming is desired.
• Remote control distance is limited: Avoid using the dimmer near widely ranged metal areas or strong electromagnetic waves. Ensure all dimmers are linked to the same remote for auto-transmitting functionality.

8. Uživatelské tipy

Od zákazníka nebyly k dispozici žádné konkrétní tipy pro uživatele.views or Q&A for this product. However, general advice for smart dimmers includes:

• Always test the dimmer with a single bulb before installing multiple lights to ensure compatibility.
• Consider using high-quality dimmable LED bulbs for the best performance and to avoid flickering.
• For multi-dimmer setups with a single push switch, ensure the connection cable for the self-return switch is within the 20m limit and the number of dimmers does not exceed 25.
• Regularly check for firmware updates for your smart home hub or the Tuya Smart app to ensure optimal performance and compatibility.

9. Záruka a podpora

This product comes with a 1-year warranty from the date of purchase. For technical support or warranty claims, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

10. Důležité bezpečnostní informace

Dodržujte prosím následující bezpečnostní pokyny, abyste předešli zranění nebo poškození zařízení:

• Always disconnect power before installing or servicing the dimmer.
• Zajistěte vstupní objtage is within the specified range (AC100~240V~ 50/60Hz).
• Do not attempt to disassemble or modify the device unless you are a qualified professional.
• Avoid installing the dimmer in locations with high humidity or near strong electromagnetic fields.
• Tento výrobek je určen pouze pro vnitřní použití.

This image displays various safety symbols and warnings, including "Made in China", CE, UKCA, RoHS, and a symbol indicating the dimmer cannot be used in humid areas.