CRIN Ultimate Statement Ring User Guide

CRIN Ultimate Statement Ring 

CRIN Ultimate Statement Ring 

METHOD 1

Measuring an existing ring

1. Print this page, ensuring that page scaling is set to none in the print dialog box.
2. Find a ring that already fits your finger.
3. Position the ring over the circles drawn below, lining up the inside of the ring with the circle that best matches its size.
4. If your size is between two sizes or if you are unsure of your size, opt for the largest of the two.
   
   The sizes used by Écrin are european.

METHOD 2

Measuring your finger

1. Take a length of string or cut a strip of paper no more than 1cm wide (a slightly less than half an inch)
2. Wrap it around the largest part of your finger
3. Use a pen to mark the point on the string or strip of paper where it forms a circle
4. Pick the marked strip or string of paper on a flat surface
5. Using a ruler, measure the distance from the end of the string or paper to the mark you make
6. Compare your measurement with the chart below to determine your ring size
   

   Measure (mm)	European ring size*	UK & USA ring size	Japanese ring size
   13.06	41	1 3⁄4	1
   13.38	42	2 1⁄4	2
   13.69	43	2 1⁄2	3
   14.01	44	3	4
   14.33	45	3 1⁄4	5
   14.65	46	3 3⁄4	6
   14.97	47	4	7
   15.29	48	4 1⁄2	8
   15.61	49	4 3⁄4	9
   15.92	50	5 1⁄4	10
   16.24	51	5 3⁄4	11
   16.56	52	6	12
   16.88	53	6 1⁄4	13
   17.20	54	6 3⁄4	14
   17.52	55	7 1⁄4	15
   17.83	56	7 1⁄2	16
   18.15	57	8	17
   18.47	58	8 1⁄4	18
   18.79	59	8 3⁄4	19
   19.11	60	9	20
   19.43	61	9 1⁄2	21
   19.75	62	10	22
   20.06	63	10 1⁄4	23
   20.38	64	10 3⁄4	24
   20.70	65	11	25
   21.02	66	11 1⁄2	26
   21.34	67	11 3⁄4	27
   21.66	68	12 1⁄4	28
   21.97	69	12 1⁄2	29
   22.29	70	13	30
   22.61	71	13 1⁄4	31
   22.93	72	13 3⁄4	32

   *corresponding to the finger circumference (mm)

CUSTOMER SUPPORT

Should you require any assistance, please contact our customer service team at services@ecrinparis.com