CREATE Rice Cooker Studio User Manual

CREATE Rice Cooker Studio 

CREATE Rice Cooker Studio

Thank you!

Thank you very much for choosing our rice cooker. Before using this product, carefully read the instructions for its correct use.

The included safety precautions reduce the risk of electric shock, injury, or even death if strictly followed. Please keep this manual in a safe place for future reference, along with the original product packaging and proof of purchase. If possible, pass these instructions on to the next owner of the appliance. Always follow basic safety precautions and accident prevention rules when using an appliance. The company declines all responsibility derived from the non-compliance of these instructions by the clients.

SECURITY INSTRUCTIONS

When using any electrical appliance, basic safety precautions should al- ways be followed.

  • Make sure the grounding of the plug is effective before use. At the same time, please confirm that the input power supply is 220-240V~, 50-60Hz.
  • If the power cord is damaged, contact the brand’s customer service.
  • In the process of use, if problems occur, please unplug the power plug from your home socket,
  • Do not pull or connect the plug with wet hands to avoid electric shock.
  • Do not insert metal or other materials into the heat dissipation holes or gaps. They may cause damage or risk of electric shock.
  • Do not place this product on or near the surface of heat sources, such as ovens, etc.
  • It is forbidden to use this product on an unstable or tilted table to avoid injury or fire caused by product spillage.
  • Do not use on or near non-heat resistant surfaces, such as rugs and plastic stools, and do not place objects that can be damaged by steam on top of this product.
  • It is forbidden to put the inner pot directly on the fire to cook food.
  • This appliance can be used by children aged 8 years and over and people with reduced physical, sensory or mental capabilities, or with limited experience or knowledge, provided they are supervised by a person responsible for their safety or who has been trained to use it. the appliance safely.
  • Children must not play with this appliance. They also should not perform cleaning and maintenance tasks unless they are older than 8 years and are supervised. Children should be closely supervised when using any appliance.
  • If the product burns dry, please add water to the machine or disconnect the power. Do not touch the heater to avoid burns.
  • When the product is working, a large amount of steam will be ejected from the steam port, which may cause burns.
  • When the cooking cycle is complete, a large amount of steam remains inside. Do not open the top cover immediately. Wait a few minutes after the power is cut off to avoid steam burns.
  • When cleaning, be especially careful not to spill liquids inside and around the cord and plug.
  • Do not use the appliance with an external timer or separate remote control system.

LIST OF PARTS

LIST OF PARTS

  1. Measuring spoon
  2. Sealing ring
  3. Stainless steel cover
  4. Inner pot
  5. Product cover
  6. Scape valve
  7. Screen
  8. Command wheel
  9. Pot body
  10. Non-slip feet
  11. Power cord

CONTROL PANEL

CONTROL PANEL

PROGRAMMING

Opening button

  • In the upper part of the lid you will find the button to open the product.

TIMER: Programming button

  • In standby mode, press the [timer] button to select the setting you want.
  • The digital display shows the default time “0:30” intermittently. Press the button again, repeatedly, to set the programming time you want. The maximum programming time can be set to 24 hours.
  • After setting the programming time, rotate the command wheel, to select the desired function, and press the command wheel to enter the work mode (it can automatically enter the work mode without pressing the key starting time by letting 5 seconds pass).
  • You have a time of 5 seconds, after setting the programming time, to select the function you want. If the command wheel is not turned in this period of time, the system will return to standby mode.

Command wheel

  • In standby mode, rotate the command wheel to enter function selection.
  • The digital display will show you the preset cooking time for each function.
  • Press the command wheel to enter the work mode of the function you want. (It can be automatically entered into the working mode without pressing the start key by letting 5 seconds pass.)

CANCEL: Cancel/return button

  • To exit the work mode, press the [CANCEL] button
  • Use the [CANCEL] button to return to standby mode.

MODE OF USE

According to the different cooking requirements, the food will be processed differently and the corresponding preparations will be made for each.

MODE OF USE

Schedule Setup

  • When the product is turned on in standby mode, you can see on the digital display: “—-”.
  • Press the [TIMER] button to set the programming time you want. The digital display shows the default time of 0:30 hours. Within 5s, turn the command wheel to enter the desired selection, otherwise the rice cooker will automatically return to standby mode.
  • Turn the command wheel, within 5 seconds, to choose the function you want.
  • Select a function by pressing the command wheel to enter work mode or press the [CANCEL] button in case you want to return to standby mode.
  • Once in work mode, pressing the [TIMER] button will have no effect.
  • If you want to cancel the work mode and return to the standby mode, press the [CANCEL] button.

Note

  • Make sure the grid on the stainless steel lid matches the steam outlet.
  • The maximum programming time is 24 hours.
  • If the food goes bad easily or it’s hot, don’t set a long time.
  • Product cooking time = programming time + working time of the selected function. Example: It takes 2.5 hours to make soup. If you want to cook the soup in 7 hours, you should set the programming time to 4.5 hours, and the function time for [SOUP] to 2.5 hours.

Status at the end of the firing program:

  • Once the chosen program is completed, the product automatically goes into the thermal insulation function. At this time, the heat insulation function indicator lights up, and the digital display shows the countdown.
  • Press “Cancel” key, the digital display will show “—”, and the indicators of all functions will stay on.
  • During the working mode, if the water is insufficient or the product dries up, the indicators of all functions light up, and the digital display shows a failure indicator.

DEFAULT FUNCTIONS

FUNCTION

TIME RICE/WATER
(80G MEASURING CUP)

RICE/WATER (160G MEASURING CUP)

Quick cooking [Quick cook]

Car 1/1 (Up to 8 cups) 1/1 (Up to 8 cups)
Slow cook [Slow cook] Car 1/1 (Up to 8 cups)

1/1 (Up to 8 cups)

Wheat [Grains]

Car

1/1 (Up to 8 cups) 1/1 (Up to 8 cups)
Soup [Soup] 2.5 hours /

/

Porridge

1.5 hours 1/1 (Up to 8 cups) 1/1 (Up to 8 cups)
Steamed food [Steam] 1.0 hours /

/

Pastry [Cake]

Car / /
Stews [Stew] 2.0 hours /

/

Reheat [Reheat]

Car / /
Heat preservation [Keep warm] 12 hours /

/

MAINTENANCE

  • Before cleaning and maintenance, be sure to unplug the power cord from the socket and clean the machine after it cools down.
  • Add a small amount of clean water and detergent to the pot. Wipe the inner surface of the pot with a soft cloth or sponge, pour out the water after cleaning, and then wash the inner surface of the pot with clean water. Then pour the water into the pot and wipe it with a dry cloth. Do not directly clean the outer surface of the product with water
  • Do not use strong products, hard brushes or stainless steel scourers to clean it, so as not to damage the surface.
  • Do not put the whole machine in water to clean it. The external surface of the product can be cleaned with a wrung-out damp cloth. Do not wash with water to avoid electric leakage.
  • When using the inner pot, please handle it with care.
  • When the product is not used for a long time, please clean it and place it in the packing box and in a ventilated and dry place to prevent moisture from affecting its use.

NOTE

  • The alarm is activated 30 seconds later if the temperature exceeds 150 ºC.
  • After analyzing the previous failures, if the failure persists, please contact the brand’s customer service.
  • It is strictly forbidden for non-professional personnel to disassemble the machine.
  • This product and food contact materials meet the requirements of relevant food safety standards.

COMMON PROBLEMS

PROBLEM CAUSE
Display failure
  • E1: Lower sensor open circuit.
  • E2: Lower sensor short circuit.
  • E3: bottom sensor.
The digital display does not work and the product cannot be used normally
  • Check if the power is cut off.
  • Check if the power plug is plugged in.
  • If the outlet is closed.
The food does not come out cooked
  • Make sure you have selected the correct function.
  • You forgot to add water or added too little water.
  • The product turned on the protection against dry burning in advance.
  • The cooking time was too short.

Symbol In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances in electric and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package indicates that the product at the end of its service life shall be collected as separate waste. Therefore, any products that have reached the end of their useful life must be given to waste disposal centres specializing in separate collection of waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimizes the recycling and reuse of components making up the apparatus. Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws.

Symbols

Logo

Documents / Resources

PDF thumbnailRice Cooker Studio
User Manual · Rice Cooker Studio, Rice, Cooker Studio, Studio
PDF thumbnailRice Cooker Studio
User Manual · Rice Cooker Studio, Cooker Studio

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. J ai du mal à comprendre le fonctionnement du cuiseur à riz.
    Aucune information n ai donnée dans le manuel. Aucun temps de cuisson n ai proposé ! Très déçu du produit.

    Leca asks J ai du mal à comprendre le fonctionnement du cuiseur à riz.
    Aucune information n ai donnée dans le manuel. Aucun temps de cuisson n ai proposé ! Très déçu du produit.
    Manuals+ clarified question
    Question

    How do I operate the CREATE Rice Cooker Studio and what are the cooking times?

    Answer

    The CREATE Rice Cooker Studio uses preset functions rather than manual time entry for most modes. Below is a guide to the operation and cooking times as specified in the manual:

    Default Cooking Times:

    • Soup [Soup]: 2.5 hours
    • Stews [Stew]: 2.0 hours
    • Porridge: 1.5 hours
    • Steamed food [Steam]: 1.0 hour
    • Quick cooking, Slow cook, Grains, Cake, Reheat: These are Automatic. The time depends on the amount of food and the temperature of the water inserted.

    Basic Operation Steps:

    1. Place your ingredients in the inner pot (4) and place the pot into the machine body (9).
    2. Close the lid. In standby mode (display shows "----"), rotate the Command wheel (8) to select your desired function.
    3. The digital display will show the preset cooking time for that function.
    4. Press the Command wheel to start, or wait 5 seconds for it to enter work mode automatically.

    Tips for Better Results:

    • Rice/Water Ratio: For standard rice, use a 1/1 ratio (e.g., 1 cup of water for 1 cup of rice).
    • Delayed Start: You can use the TIMER button to set a delay (up to 24 hours) before the cooking cycle begins.
    • Rice Preparation: Always wash rice thoroughly in cold water to remove excess starch before cooking to prevent water from overflowing.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.