CREALITY CR-M4 3D Printer User Manual
To Our Dear Users
Thank you for choosing Creality. To make using our products easier, please read this User Manual before you start and follow the instructions provided carefully. Creality is always ready to provide you with high-quality services. If you encounter any issues or have any questions when using our products, please use the contact information at the end of this manual to contact us. To further improve your user experience, you can find more about our devices via the following methods: User manual: You can find instructions and videos in the SD card provided with the printer. You can also visit our official website (https://www.creality.com) to find information regarding software, hardware, contact information, device instructions, device warranty information, and more.
Firmware Upgrade
Please visit our official website https://www.creality.com/download, switch to your language, then select your printer and model. Download the required firmware and install it to use it with your printer.
NOTES
- Do not use the printer any way other than described here in order to avoid personal injury or property damage.
- Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it in a well-ventilated, low-dust environment.
- Do not expose the printer to violent vibration or any unstable environment, as this may cause poor print quality.
- Before using experimental or exotic filaments, we suggest using standard filaments such as ABS or PLA to calibrate and test the machine.
- Do not use any other power cable except the one supplied. Always use a grounded three-prong power outlet.
- Do not touch the nozzle, hotbed or motor while the printer is in operation, otherwise you may get burned.
- Do not wear gloves or loose clothing when operating the printer. Such cloths may become tangled in the printers moving parts leading to bums, possible bodily injury, or printer damage.
- When cleaning debris from the printer hotend, always use the provided tools. Do not touch the nozzle directly when heated. This can cause personal injury.
- Clean the printer frequently. Always turn the power off when cleaning, and wipe with a dry cloth to remove dust, adhered printing plastics or any other material off the frame, guide rails, or wheels. Use glass cleaner or isopropyl alcohol to clean the print surface.
- Children under 10 years old should not use the printer without supervision.
- This machine is equipped with a security protection mechanism. Do not manually move the nozzle or printing platform mechanism manually while booting up, otherwise the device will automatically power off for safety.
- Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes. Creality will not be responsible for any violators’ legal liability under any circustance.
Equipment Introduction
- Z-axis Cable Drag Chain
- X-axis Limit Switch
- Extruder Extrusion Kit
- Printing Platform
- Y-axis Tensioner
- USB Flash Drive Port
- Material rack
- Filament Detection
- X-axis Cable Drag Chain 1
- X-axis Tensioner
- Camera Interface
- RJ45 Network Interface
- Display screen
- Type-c port
- Y-axis Limit Switch
Equipment Parameters
| Basic Parameters | |
| Model | CR–M4 |
| Language | English/ $/ Español/ Deutsche/ Français/ PyccKий/ Português/ Italiano/ Türk |
| Print Method | USB flash drive/Type–c online printing/WI–FI printing/RJ45 network interface printing |
| Forming process | FDM |
| Number of Extruder | 1 |
| Printing Size | 450*450*470mm |
| Slice Thickness | 0.05–0.35mm |
| Printing Speed | “ 120 mm/s, generally 50 mm/s |
| Nozzle Diameter | 0.4 mm (0.@/0.8 mm optional) |
| Ambient Temperature | 5?~35? |
| Hotbed temperature | “100? |
| Nozzle temperature | “300? |
| Filaments | PLA/PETG/TPU/ABS/PLA–Wood/PA/PLA–CF |
| Operating System | WIN/MAC/Linux |
| Supported File Format | STL/OBJ/AMF |
| Power Loss Recovery | Yes |
| Filament Detection | Yes |
| Rated Voltage | 100–240V~ 50/@0Hz |
| Rated Power | 800W |
Parts List
- Base Component
- Gantry Frame Assembly
- Z–axis Cable Drag Chain
- Display screen
- Display Screen Frame
- Pull Rod x 2
- Material Rack and Filament Sensor
- Material Barrel × 2
- Filament
Accessory kit - Cutting Plier
- Blade
- Power Cable
- Nozzle Kit
- USB Flash Drive
- Cable Tie
- 1.2mmNozzle Cleaner
- Nozzle Cleaner
- Wrench and Screwdr
- M5 Flat Gasket × 2
- Hexagon Socket Head Cap Screw M5*45 × 4
- Hexagon Socket Button Head Screw M4
- Countersunk Screw M3*5 × 3
- Hexagon Socket Button Head Screw M5*10 × 2
- Hexagon Socket Button Head Screw M5*25 × 2
Device Installation
Installation of X-axis Cable Drag Chain
A. Insert the extruder adapter terminals nto the appropriate interfaces. B. Fix the front end of the X-axis cable drag chain to the extruder back support plate with 3 M3*5 screws. C. Align the clips and then apply gentle pressure to assemble the drag chain at the rear end of the X-axis.
Gantry Frame Installation
Place the gantry frame on the base slot and pre-fix it first with 4 M5*45 screws aligned with the holes, then tighten to secure it.
Documents / Resources
 |
CREALITY CR-M4 3D Printer [pdf] User Manual CR-M4 3D Printer, CR-M4, 3D Printer, Printer |
