CFS C-SM-001 Filament Management System
“
Specifications:
- Product Name: Cutter Buffer Module
- Interface: Pneumatic
- Compatibility: CFS-C Main unit
- Communication: CAN and USB
- Power Adapter: Included
Product Usage Instructions:
1. Connecting Pneumatic Interfaces:
1. Slide the latch of the buffer’s single-outlet pneumatic
interface to the locked position.
2. Insert one end of a 2000mm PTFE tube into the buffer’s
pneumatic port.
3. Connect the other end of the tube to the printhead’s
pneumatic port, ensuring a secure connection.
2. Connecting Communication Cables:
1. Retrieve two CAN communication cables and the communication
module.
2. Connect one cable between the rear interface of the CFS-C
Main and the top interface of the cutter buffer.
3. Connect the other cable between the CAN interface of the
communication module and another rear interface of the CFS-C
Main.
3. USB Connection:
1. Take the USB-to-Type-C communication cable and briefly insert
it into the printer’s USB port.
2. Retrieve the USB mounting base, thread the USB connector
through the base, and reinsert it into the printer.
3. Peel off the adhesive backing from the mounting base and
secure the USB interface in place.
4. Insert the Type-C connector into the communication
module.
4. Power Connection:
1. Connect the power adapter to the CFS-C Main unit.
2. Plug it into an AC power outlet.
3. Assemble the conversion plug to the power adapter based on
your regional requirements.
5. Waste Management:
Fold the waste box into shape and position it beneath the waste
outlet of the cutter buffer module.
6. Final Setup:
Install the printed riser onto the top of the machine and place
the top cover over it.
Slice the model and download it from Creality Cloud for further
usage.
Frequently Asked Questions (FAQ):
Q: How do I ensure a secure pneumatic connection?
A: Slide the latch to lock the pneumatic interface and gently
test for dislodgement after connecting the tubes.
Q: Do I need to adjust the PTFE tube length?
A: Cut the 2000mm tube to 500mm length, adjusting based on your
number of CFS-C Main units for optimal connection.
“`
2. Unboxing
10 Secure the PTFE tube bracket to the printer using an M3×8 screw. 11 Take a 900mm PTFE tube, route it through the previously installed bracket, and use it to connect the cutter buffer to the printhead by inserting one end into
the buffer’s single-outlet pneumatic interface (after sliding its latch to the locked position) and the other end into the printhead’s pneumatic port, ensuring a secure connection by gently testing for dislodgement. 12 Take another 2000mm PTFE tube, cut it to 500mm length (adjust based on your number of CFS-C Main units) using a tube cutter, then connect one end to the 5-way interface of the CFS-C Main and the other end to the 5-way interface of the cutter buffer.
14
2. Unboxing
13 Retrieve two CAN communication cables and the communication module, then connect one cable between the rear interface of the CFS-C Main and the top interface of the cutter buffer, and the other between the CAN interface of the communication module and another rear interface of the CFS-C Main as illustrated.
15
2. Unboxing
14 1Take the USB-to-Type-C communication cable, briefly insert it into the printer’s USB port and then remove it. Retrieve the USB mounting base, thread the USB connector through the base, and reinsert it into the printer.
15 1Peel off the adhesive backing from the mounting base, then secure the USB interface in place. 16 1Insert the Type-C connector into the communication module.
16
2. Unboxing
17 Connect the power adapter to the CFS-C Main unit, then plug it into an AC power outlet.
T
Due to regional differences, the power adapter includes a conversion plug. You may assemble it to the power adapter according to your local requirements.
17
2. Unboxing
18 Fold the waste box into shape and position it beneath the waste outlet of the cutter buffer module.
18
2. Unboxing
19 Install the printed riser onto the top of the machine, then place the top cover over it.
T
Slice the model and download it from Creality Cloud.
19
Documents / Resources
 |
CREALITY CFS C-SM-001 Filament Management System [pdf] Instruction Manual CFS C-SM-001, CFS C-SM-001 Filament Management System, Filament Management System, Management System |