CountureMode ES6 Hidden Camera Detector

Product Parameters
| Specification | Details |
| Product Name |
ES6 Signal Detector |
| Screen |
1.83-inch HD Touchscreen |
| Detection Modes |
Multiple Detection Modes |
| Battery |
600mAh Polymer Lithium Battery |
| Charging Input |
Type-C, 5V – 370mA |
| Charging Time |
Approx. 1.5 Hours |
| Product Dimensions |
4.88 × 1.83 × 0.56 Inches |
| Net Weight |
71g |
| Operating Temperature |
-4°F ~ 122°F (-20°C ~ 50°C) |
Product Introduction
The ES6 combines multiple detection technologies to help identify hidden cameras, wireless signal transmitters, GPS trackers, and magnetic tracking devices. It is designed to enhance personal privacy and security in a wide range of environments.

Applicable Scenarios 
Product Structure

Quick Start Guide
Power On
Press and hold the power button for 3 seconds. The screen will turn on, and the device will enter standby mode.

Power Off
Press and hold the power button. When the “Power Off” option appears on the screen, tap it to turn off the device.

Tip: The screen stays on constantly once the device is powered up. To save power and protect the device, please turn it off if you won’t be using it for a while.
Camera Detection
Quickly locate hidden camera lenses by picking up reflected red light.
Operation Steps
- Select “Camera Detection” mode
- Red light turns on automatically
- Look through the optical filter lens and slowly scan the suspected area.
- A bright red reflective spot may indicate a hidden camera lens.

lighting mode

Night Vision Camera Detection
Use the green scanning light in a dark environment to locate infrared night vision cameras.
Operation Steps
- Select “Wireless Signal Detection” mode.
- Hold the device upright and scan the surrounding area slowly.
- The faster the beeping and the higher the displayed value, the stronger the detected signal.
- Adjust the sensitivity using the “+” and “–” buttons.

Recommended detection locations

Wireless Signal Detection
Detect wireless signal transmitters, including Wi-Fi, Bluetooth, GPS, and mobile communication devices.
Operation Steps
- Select “Wireless Signal Detection” mode.
- Hold the device upright and scan the surrounding area slowly.
- The faster the beeping and the higher the displayed value, the stronger the detected signal.
- Adjust the sensitivity using the “+” and “–” buttons.

Recommended detection locations

Magnetic Device Detection
Detect magnetic devices, such as GPS trackers and other magnetic tracking devices.
Operation Steps
- Select “Magnetic Device Detection” mode.
- Move the device close to the suspected area.
- The detector will sound an alert when a strong magnetic field is detected.
- Inspect the target area carefully for a concealed magnetic device.

Recommended detection locations

AI-Assisted Signal Localization
AI-assisted spectrum analysis and extended monitoring help detect and locate intermittently transmitted tracking signals
Operation Steps
- Select “AI-Assisted Signal Localization” mode.
- Place the device near the suspected area.
- The device will automatically record and analyze changes in signal strength.
- Open the Records screen to review detected signal activity.

Recommended detection locations 
Sentry Guard Mode
The device automatically sounds an alarm if it is moved or disturbed, helping protect your belongings.
- Select “Guard Mode”
- Hang the device on a door handle or attach it to the item you want to protect.
- After a 5-second countdown, the device will enter guard mode.
- An alarm will sound if the device is moved or disturbed.

Applicable Locations 
Settings Menu

Package List

FCC REGULATORY COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Documents / Resources
![]() | ES6 Hidden Camera Detector |
References
- User Manualmanual.tools

