Medium Wall
Light Instructions
Medium Wall Light
These products must be installed in dry conditions by a qualified electrician. Turn off electrical supply to circuit before installation.
| Location | Interior/Exterior |
| Class | Class 1 |
| IP Rating | IP44 |
| Bathroom Zone | Zone 2 |
| Driver Required | No |
| Fire Rating | No |
| Cable Length | 200mm |
| Light Source | No |
| Max Wattage | Bulb Dependant |
| Lamp Included | G9 |
| Switched | 6W |
| Dimmable | No |
| Rated Voltage | 220-240V |
| Rated Frequency | 50 /60Hz |

- Install wall light mount

- Push wires through grommet

- Connect WAGOs inside base

- Tighten grub screws

- Unscrew glass cover to add bulb

- Screw Claremont shade onto body

- Use shade ring to secure shade

- Use grub screw to adjust shade height


Documents / Resources
![]() | Medium Wall Light |
![]() | Medium Wall Light |
![]() | Medium Wall Light |
References
- corston.ae/supportcorston.ae
- User Manualmanual.tools
Published: May 24, 2024


