Corsano App BP Cuff Device
NIBP – Pair a BP cuff device
Add a Corsano BP cuff device to the Corsano App
- Press the right top corner to go to Settings
- Select BP Cuff
- Press [Start Pairing] Don’t press the Start button of the CuffB monitor
- Follow instructions. Press “Cancel” to abort the pairing process and try again.
- BP cuff pairing success. Make sure this is your device by visually checking the identifier number on the Cuff monitor.
NIBP – BP cuff measurement
- Follow these steps to perform a BP cuff measurement – Instructions
- Press [Start BP Measurement] from the Dashboard.
- Tick the box if you take medication to lower Blood Pressure.
- Follow the instructions to properly adjust the tightness of the bracelet.
- Follow the instructions to properly adjust the position of the bracelet.
- Prepare for the Blood Pressure Cuff measurement. Sit and follow the instructions.
- Rest your arm on a table at the same level as your heart.
- Check the tightness of the Cuff. Sit still, don’t move and relax.
Follow these steps to perform a BP cuff measurement – Measurement
- Press the [START] button on the Cuff monitor. The Cuff will inflate and measure your Blood Pressure. Wait for the measurement to finish. This takes about 30s.
- After completion of the third measurement, the Non-Invasive Blood Pressure is calibrated. The result of the calibration is available in the APP.
NIBP – Messages
Initial setup, day 1 – No BP cuff init
- Alert message on top of the dashboard
- Detail message with init status in the BP cell
NIBP – Messages
Initial setup – One or more BP cuff init done
- Alert message on top of the dashboard, with details
- Detail message with init status in the BP cell. First init measurement done. Continuous Blood Pressure will start coming.
Initial setup,- One or more BP cuff init done, with error.
- Alert message on top of the dashboard, With details
- Detail message with init status in the BP cell. First init measurement done. Second init measurement with error. Continuous Blood Pressure start coming.
Specifications
- Device: Corsano BP Cuff
- App: Corsano App
- Measurement Type: Blood Pressure
- Measurement Method: Non-Invasive
Frequently Asked Questions
Initial Setup, Day 1 – No BP Cuff Init
- Alert message on top of the dashboard.
- Detailed message with initialization status in the BP cell.
Initial Setup – One or More BP Cuff Init Done
- Alert message on top of the dashboard with details.
- Detailed message with initialization status in the BP cell. First init measurement done.
- Continuous Blood Pressure readings will start appearing.
Initial Setup – One or More BP Cuff Init Done, with Error
- Alert message on top of the dashboard with details.
- Detailed message with initialization status in the BP cell. First init measurement done.
- Second init measurement with error. Continuous Blood Pressure readings will start appearing.
Documents / Resources
 |
Corsano Corsano App BP Cuff Device [pdf] User Guide Corsano App BP Cuff Device, App BP Cuff Device, Cuff Device, Device |