CSTM80 MECHANICAL KEYBOARD
QUICK START GUIDE
CSTM80
GETTING STARTED WITH YOUR NEW CSTM80 KEYBOARD
INITIAL START-UP
- The keyboard should work out of the box with macOS, Windows and Linux operating systems.
- For CSTM80 customizability instructions, please scan the QR code or visit dro.ps/cstm80-quickstart
DEFAULT HOT KEYS
Hold Fn key + listed keys to activate
LED KEYS
| Fn + | W | LED Brightness Increase |
| S | LED Brightness Decrease | |
| E | LED Animation Speed Increase | |
| D | LED Animation Speed Decrease | |
| R | LED Hue Increase | |
| F | LED Hue Decrease | |
| T | LED Saturation Increase Off) | |
| G | LED Saturation DecreaseToggle | |
| 0 | LED Toggle (On / Off) | |
| A | LED Animation Toggle | |
| Z | LED Mono Color Mode | |
| X | LED Breathing Effect | |
| C | LED Rainbow Mode | |
| V | LED Rainbow Pinwheel Modezz |
MISC CONTROL
| Hold Esc (Before connecting USB) |
Boot Magic (Clear EEPROM State and reboot in Bootloader) |
KEYBOARD OPTION KEYS
| Fn + | N | Toggle keyboard 6KRO/NKRO (Default state is 6KRO) |
| LCtr1+0 | Windows / MacOS Swap (System / Alt location change) | |
| LCtrl+|\ | LCtrl / Capslock Swap | |
| LCtrl+ Backspace | Reset Keyboard |
CUSTOMIZABLE FIRMWARE
To configure your keymap and hotkeys, please visit: dro.ps/cstm-configurator
Documents / Resources
 |
CORSAIR CSTM80 Custom Mechanical Keyboard [pdf] Owner's Manual CSTM80, CSTM80 Custom Mechanical Keyboard, Custom Mechanical Keyboard, Mechanical Keyboard, Keyboard |