Cooper Lighting logo

Greengate
ONW-P Wall Switch Occupancy
Sensor with RR7 Compatibility

Cooper Lighting ONW-P Wall Switch Occupancy Sensor with RR7 Compatibility

ONW-P Wall Switch Occupancy Sensor with RR7 Compatibility

Motion sensing lighting control that is used for energy savings and convenience.
Typical Applications
Private Offices • Small Conference Rooms • Lunch/Break Rooms • Small Classrooms • Small Restrooms (no stalls) • Small Lounges • Small Waiting Rooms • Small Closets • Small Storage Areas

Product Certification

Cooper Lighting ONW-P Wall Switch Occupancy Sensor with RR7 Compatibility - Symbol 1Product Features

Cooper Lighting ONW-P Wall Switch Occupancy Sensor with RR7 Compatibility - Symbol 2

Top Product Features

  • Low Voltage interface for GE RR7 – Simplifies the integration with GE RR7 Relay Systems
  • Low Voltage – Eliminates the need for conduits in most markets
  • Selectable built-in light level sensor – Optimize energy savings within the space
  • Tracking/HVAC mode – Optimize HVAC energy usage based on occupancy

Dimensional Details

Cooper Lighting ONW-P Wall Switch Occupancy Sensor with RR7 Compatibility - Dimensional Details

Scale or Mounting Height

Cooper Lighting ONW-P Wall Switch Occupancy Sensor with RR7 Compatibility - Scale or Mounting Height

Order Information

One single gang wallplate included.

Catalog Number

Catalog Number Ratings Coverage Color
ONW-P-1001-RR7- * (*-W, V, LA, G, B,) 24 VAC Input with isolated Form
C relay (half wave rectified)
180°; 1000 sq. ft. W=White, V=Ivory, LV=Light Almond, G=Gray, B=Black
Notes
Not all colors are available in stock and some color options may have
extended lead times.

Product Specifications

Technology

  • Passive Infrared (PIR)

Mechanical
Mounting Plate Dimensions: 4.195” H x 1.732” W (106.55mm x 44mm)
Product Housing Dimensions: 2.618” H x 1.752” W x 1.9” D (66.5mm x 44.5mm x 48.26mm)

Environment:

  • Operating temperature: 32°F to 104°F (0°C to 40°C)
  • Relative humidity operating: 20% to 90% non-condensing
  • For indoor use only

Housing: Durable, injection molded housing. ABS resin complies with UL 94V-0

Electrical
Electrical ratings:

  • Input:
  • 24 VAC ± 10% Maximum current needed is 25mA
  • 1 VA max for each sensor
  • 7 VA max for each GE RR7/9 relay
  • 8.5 VA max for each Sierra 1070-B relay
  • Output:
  • Half-wave rectified 24 VAC for 300ms pulse for driving up to 4 GE RR7/9 type relays or up to 2 Sierra 1070-B type relays
  • Isolated Form C Relay Ratings: 1A 30 VDC/VAC

Hardware Specifications
LED Indicators:

  • Red LED = PIR detection
  • Green LED = acts as EcoMeter or nightlight locator

Controls and Performance
Time delays:

  • Self adjusting 15 seconds/test (10 min. Auto)
  • Selectable 5, 15, 30 minutes

Coverage:

  • Major motion: 36’ x 30’
  • Minor motion: 20’ x 16’

Light sensing level:

  • 0 to 200 foot candles

Standards/Ratings

  • cULus Listed
  • FCC Compliant
  • RoHS Compliant

Warning

  • This product is not intended to be used in applications involving the use of ammonia-based or VOC cleaners.
  • Use of ammonia-based or VOC cleaners on this device must be avoided.
    Prolonged use may cause loss of integrity and expose electrified components.
    If this occurs, turn OFF power to the unit and replace.
  • For detailed cleaning guidelines please refer to: Controls Care and Maintenance instructions at the end of this document.

Warranty
Five year warranty standard

Overview

The ONW-P-1001-RR7 is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON.
These sensors have multi-segmented lenses. For units to sense motion, the person must cross between two segments. The distance between segments increases the farther you are from the sensor, so motion had to be larger the farther you are from the unit. PIR sensors are considered line-of-sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. In Automatic On Mode, the lights turn ON when a person enters the room. In Manual On Mode, the lights are turned ON by pressing the universally recognized light icon pushbutton. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in realtime, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings. HVAC mode allows the load connected to the Form C BAS relay to remain ON when the lights are turned OFF manually. Applications may include keeping the room at a desired temperature while giving a presentation and the lights are OFF.

Wiring Diagrams

Cooper Lighting ONW-P Wall Switch Occupancy Sensor with RR7 Compatibility - Wiring Diagrams

Controls

Cooper Lighting ONW-P Wall Switch Occupancy Sensor with RR7 Compatibility - Controls

Field of View

Cooper Lighting ONW-P Wall Switch Occupancy Sensor with RR7 Compatibility - Field of View

Controls Care & Maintenance

Cooper Lighting Solutions

Cooper Lighting ONW-P Wall Switch Occupancy Sensor with RR7 Compatibility - Cooper

Cooper Lighting Solutions has developed recommended guidelines for cleaning our products that will not impact the operation or finish of the product.

Recommended cleaning tips:

  • Never spray any fluids directly into the device.
  • Use of ammonia-based or VOC cleaners on this device must be avoided. Prolonged use may cause loss of integrity and expose electrified components. If this occurs, turn OFF power to the unit and replace.
  • Use a damp rag or single-use wipe to avoid excess liquid penetrating the device.
  • Be sure to wipe up remaining excess liquid after cleaning.
  • Ensure the cleaning agent used does not have harsh chemicals such as bleach, ammonia, highly alkaline or concentrated acids (such as hydrochloric acid that can be found inhousehold cleaners such as toilet bowl cleaners, bathroom tile and porcelain cleaners) as they could damage the device, causing them to become brittle and discolored.
  • Cooper Lighting Solutions recommends the use of a mild liquid detergent and water to clean the devices. Single use wipes (e.g. Lysol brand or equivalent) are acceptable to use for cleaning the devices, however the single-use wipes cannot contain bleach, ammonia, highly alkaline or concentrated acids.

Cooper Lighting ONW-P Wall Switch Occupancy Sensor with RR7 Compatibility - Recommended cleaning tips

Warning Icon WARNING
This product is not intended for use in applications involving the use of ammonia-based or VOC cleaners. Prolonged use may cause loss of integrity and expose electrified components.
If this occurs, turn OFF power to the unit and replace.

Recommended cleaning instructions:

  • Never spray any fluids directly into the device.
  • Apply the mild liquid detergent to a damp cloth or paper towel. Single use wipes (e.g. Lysol brand or equivalent) are acceptable to use for cleaning the devices, however single-use wipes cannot contain bleach, ammonia, highly alkaline or concentrated acids.
  • If excess liquid is present, remove by wringing out the cloth or paper towel to avoid liquid penetration into the device.
  • Clean the Cooper Lighting Solutions device by wiping over the surface with the damp cloth.
  • Remove an excess liquid remaining on the device with a dry cloth or paper towel.

Cooper Lighting logo

Cooper Lighting Solutions
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
For service or technical assistance:
1-800-553-3879
Canada Sales
5925 McLaughlin Road
Mississauga, Ontario L5R 1B8
P: 905-501-3000
F: 905-501-3172
© 2024 Cooper Lighting Solutions All Rights Reserved.
Product availability, specifications, and compliances are subject to change without notice.

Documents / Resources

Cooper Lighting ONW-P Wall Switch Occupancy Sensor with RR7 Compatibility [pdf] Owner's Manual
ONW-P-1001-RR7-W, ONW-P-1001-RR7-V, ONW-P-1001-RR7-LA, ONW-P-1001-RR7-G, ONW-P-1001-RR7-B, ONW-P Wall Switch Occupancy Sensor with RR7 Compatibility, ONW-P, Wall Switch Occupancy Sensor with RR7 Compatibility, Switch Occupancy Sensor with RR7 Compatibility, Occupancy Sensor with RR7 Compatibility, Sensor with RR7 Compatibility, with RR7 Compatibility, RR7 Compatibility, Compatibility

References

Leave a comment

Your email address will not be published. Required fields are marked *