ConvaTec ESTeem Flex Convex
HOW TO USE THE CLIPLESS TAIL CLOSURE
CLOSING THE POUCH
- Step 1: Holding the outlet end strips, fold the end up towards you until the interlocking closures line up.
- Step 2: Press the interlocking closures together across the width of the tail. Press and pinch across the closure until you feel them close.
- Step 3: Place finger under the gap below the fabric and tuck in the closure, if desired.
EMPTYING AND CLEANING THE POUCH
- Step 1: Remove closure from the gap below the fabric.
- Step 2: To empty the pouch, tilt the tail up towards your body. Peel open the closure and unfold the tail.
- Step 3: Holding the pouch tail with one hand, open the tail by pushing in both ends of the outlet end strips with the other hand to drain the pouch.
Tip: You can pull up on the tab to help open tail. - Step 4: Clean the inside surface of the pouch tail with toilet tissue or a wipe. The pouch tail can also be cleaned gently with pH neutral soap and water.
For more information, call us on – 0800 282 254
Please refer to the package insert for complete instructions for use. TM ® indicates trademarks of ConvaTec Inc. © 2016 ConvaTec Inc. AP-016789-MM
Documents / Resources
 |
ConvaTec ESTeem Flex Convex [pdf] Instructions ESTeem Flex Convex, ESTeem, ESTeem Convex, Flex Convex |
