SRR6-A Advanced Radar Sensor
“
Specifications
- Product Name: Advanced Radar Sensor, SRR6-A
- FCC ID: OAYSRR6A
- Manufacturer: ADC Automotive Distance Control Systems GmbH
- Compliance: FCC regulatory compliance
Product Description
The Advanced Radar Sensor, SRR6-A is a radar sensor manufactured
by ADC Automotive Distance Control Systems GmbH. It is designed for
autonomous mobility applications.
Product Usage Instructions
Installation
1. Ensure the radar sensor is mounted securely in a location
that provides optimal coverage.
2. Connect the radar sensor to the appropriate power source
following the provided wiring diagram.
3. Adjust the sensor settings as needed using the accompanying
software.
Operation
1. Power on the radar sensor according to the manufacturer’s
instructions.
2. Monitor the sensor readings and adjust settings as necessary
for optimal performance.
3. Follow all recommended safety precautions during
operation.
Maintenance
1. Regularly inspect the radar sensor for any signs of damage or
wear.
2. Clean the sensor lens and housing periodically to ensure
accurate readings.
3. Update firmware and software as recommended by the
manufacturer.
FAQ
Q: What should I do if the radar sensor is not functioning
properly?
A: Check the power source, connections, and sensor settings to
ensure proper operation. If issues persist, contact customer
support for assistance.
Q: Is it safe to operate the radar sensor in all weather
conditions?
A: The radar sensor is designed to function in various weather
conditions, but extreme conditions may affect its performance.
Exercise caution in adverse weather.
“`
Autonomous Mobility
End user information
2023-08-29
Device description: FCC ID:
Advanced Radar Sensor, SRR6-A OAYSRR6A
The above stated product is manufactured by the grantee (ADC Automotive Distance Control Systems GmbH) and sold as an OEM product. When end-user instructions are required, as is the case with this product, the certification owner must inform the OEM to notify the end-user.
ADC Automotive Distance Control Systems GmbH will supply the following information to the
reseller/distributor dictating what must be included in the end user’s manual for the commercial product.
INFORMATION TO BE INCLUDED IN THE END USER’S MANUAL
The following information must be included in the end product user’s manual to ensure continued FCC regulatory compliance. The ID numbers must be included in the manual if the device label is not readily accessible to the end user. The compliance paragraphs below must be included in the user’s manual:
Advanced Radar Sensor, SRR6-A FCC ID: OAYSRR6A
Radiofrequency radiation exposure information: This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and the body of any persons, user or bystander. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
US FCC Notice: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
ADC Automotive Distance Control Systems GmbH | Peter-Dornier-Straße 10, 88131 Lindau www.continental-corporation.com
Documents / Resources
 |
Continental SRR6-A Advanced Radar Sensor [pdf] User Manual SRR6-A, OAYSRR6A, SRR6-A Advanced Radar Sensor, SRR6-A, Advanced Radar Sensor, Radar Sensor, Sensor |