CONICO Wireless IP Camera Installation Guide
CONICO Wireless IP Camera Installation Guide
Wireless IP Camera
COMICO Quick Installation Guide E-mail: support@i-conico.com Note: Due to the continuous updating of the product & software, there may be a discrepancy between this user guide and App interface. All the instructions are subject to the actual operation interface.
Welcome
Thank you for purchasing a CONICO Wireless IP Camera! This user manual is designed to be a reference tool for the installation and operation of your camera. Here you can find information about the camera’s installation and operation, as well as information to aid in troubleshooting. To contact Conico support, please E-mail to support@i-conico.com
Important Security Warning
To keep your Conico camera secure and prevent unauthorized access, please make sure to follow the steps below:
- Always make sure that your camera has the latest firmware.
- Never use the default password for your camera. Always ensure that your password is at least 8-10 characters long and contains a combination of lowercase characters, uppercase characters as well as numbers.
1. Device Overview Please refer to the following chart for information about the camera and its ports. 
- IR Led
- .Lens
- Sensor
- Speaker
- Power Port
- Microphone
- Micro SD Card Slot
- Reset Button
2. Download the App Optional 1. Scan the QR code. 
Optional 2. Get it on the App Store and Google Play Store. 
Optional 3. Download on the website: www.mipcm.com. System Requirements: Android 4.2.2 or higher iOS 7.0 or higher Windows 7/8/9 or higher 3. Sign Up and Login Step
- Tap the MIPC, then click on Sign Up Step
- Enter the account username and password Step
- For your account security and password recovery request, we recommend you bind your mail before logging in.
Note: Your password is at least 8 characters and contains lowercase characters, uppercase characters, and numbers. 4.Connect the Camera to your Phone Step 1. Tap the “+” icon at the top left. Step 2. Choose “ Fix Cameras ” Step 3. Scan the QR code on the camera and add it.
Step 4. Choose “Sound Connection” Step 5. Enter your home Wi-Fi network and password 
Step 6. Connect the camera with the power source and wait for about 60 seconds to allow the camera getting ready. It will be ready after hearing the sound like the water is dropping. Step 7. Press the reset button 1 second, then you would hear the voice prompts “Waiting for receiving wireless configuration information”. Please turn up your phone speaker and keep your phone closer to the camera. Step 8. Waiting for the camera connect your home router and camera’s server successfully. 
5. Installation Guide 
- Micro SD Card Slot
- Reset Button
- Power Port
- Base
- Screw
- Bracket
- Plastic bulge
- Celling or wall
Step 1. Choose a clean, smooth wall and screw the bracket in place. Step 2. Rotate the base to fix the base on the bracket. Turn clockwise and you’ll hear a “da” sound. Step 3. Installation complete. You can adjust the installation angle as needed. 6. Operation and Interface
Button |
Function Name |
Function Description |
 |
My documents |
You can find all videos that record manually.
|
 |
Local Search |
You can search all your cameras which use MIPC in the same network.
|
 |
Password Management |
Users log in the account with admin account password can change all settings, but the guest account password not.
|
 |
Binding Email |
If you forget your account password, you can use this function to get it back. But, to use this function, you have to bind your email when you sign up the MIPC account.
|
 |
Record Video |
Tap the icon, start to record video manually.
|
 |
Snapshot |
Tap the button, you can take a picture at what you see on the MIPC.
|
 |
MIC |
Long press the button, you can have a talk with people on the camera side.
|
 |
Cloud |
Tap the icon, you can choose the cloud service that you want. Please note, the cloud storage can only be store the alert videos.
|
 |
Speaker |
Tap the icon, then you can hear the voice from the camera side.
|
 |
Record History |
You can find all videos and snapshots that is recorded.
|
 |
Notification |
There are four Detection ways: Motion Detection, Face Detection, Sound Detection and Humanoid Detection. Just Enable the detection way you want, then choose and Save the time you would like to run.
|
 |
Record |
1. Enable Recording: If you would like to use Continuous Recording, you have to insert a micro SD card. 2. Start Event Recording: Enable Recording and choose the time that you would like to record when motion /sound/face/humanoid detection is trigger.
|
7. Troubleshooting Q1. You can’t set up the camera with Wi-Fi? (1) Check your wifi passwords again. (2) Make sure your home Wi-Fi network is 2.4Ghz. (Not Support 5Ghz) (3) If your home wifi signal is weak, you can use a wifi signal booster to improve it. Q2. There aren’t any videos on the micro SD card.? (1) You need to insert the SD card before the camera is powered. (2) Check if turn on the record function on the setting. Q3. Didn’t receive any warning notification? (1) Check if you allow the MIPC to send the notification to your phone. Settings → Notifications MIPC → Allow notification. (2) Check if turn on the notification function on the MIPC Camera Settings → Notifications → Detection Enable Alarm. Q4. How to restore factory settings? Long press the camera RESET button about 10 seconds, then you will hear the factory reset reminder voice” Restore to factory setting successfully”. Note: Don’t remove the power during restore factory setting. Q5. How to download videos on the micro SD card? For security consideration, all video files on the micro SD card are encrypted and can be only played on the MIPC app. If you would like to play on PC, you have to download through a dedicated video export tool.
FAQS
You can’t set up the camera with Wi-Fi?
Check your wifi passwords again.
Make sure your home Wi-Fi network is 2.4Ghz. (Not Support 5Ghz)
If your home wifi signal is weak, you can use a wifi signal booster to improve it.
There aren’t any videos on the micro SD card?
You need to insert the SD card before the camera is powered.
Check if turn on the record function on the setting.
Didn’t receive any warning notification?
Check if you allow the MIPC to send the notification to your phone. Settings → Notifications MIPC → Allow notification.
Check if turn on the notification function on the MIPC Camera Settings → Notifications → Detection Enable Alarm.
How to restore factory settings?
Long press the camera RESET button about 10 seconds, then you will hear the factory reset reminder voice” Restore to factory setting successfully”.
Note: Don’t remove the power during restore factory setting.
How to download videos on the micro SD card?
For security consideration, all video files on the micro SD card are encrypted and can be only played on the MIPC app. If you would like to play on PC, you have to download through a dedicated video export tool. Download the tool on www.mipcm.com.
More information about the MIPC, you can scan the QR code
Download on the website: http://www.mipcm.com/publish/manual/index.html
Connect the camera to a router or modem with an Ethernet cable. Then, turn on the camera and connect it to the internet. To check if your camera is connected to the internet, open your app and go to “Network”. If you see “Connected”, then your camera is connected. If you don’t see “Connected”, then your camera is not connected. To connect, tap on “Connect” and follow the instructions on screen.
Press and hold the reset button for 10 seconds. Your camera will restart automatically after that.
Go to “Camera Settings” in the app and tap on “Change Password”. Follow the instructions on screen.
Go to “Camera Settings” in the app and tap on “Wi-Fi”. Follow the instructions on screen.
Go to “Camera Settings” in the app and tap on “Motion Detection”. Follow the instructions on screen.
Go to “Camera Settings” in the app and tap on “Name”. Follow the instructions on screen.
WiFi cameras don’t need internet if you don’t wish to view the footage remotely, backup recordings, or receive alerts. Wireless security cameras usually require WiFi for transmission of video. However, an NVR, ethernet cables, or SD cards can be used in absence of a WiFi connection.
Wireless security camera systems work well as long as the signal from the cameras to the central hub is clear and uninterrupted. Within the home, wireless systems usually have a range of about 150 feet or less.
Yes, your cell phone can detect a hidden camera. All you need to do is download a hidden camera detector app. Once you have the app installed, simply open it and scan the area for any hidden cameras. The app will then alert you if any cameras are found.
Usually, the frequency of uploading recordings to the cloud is the primary reason a WiFi security camera consumes a large amount of bandwidth and data. WiFi security cameras can consume up to 60GB of data transfer per month, depending on the upload frequency.
There are two main ways wireless security cameras are powered: a wireless transmitter and batteries. A wireless transmitter can be placed in the home or business and as long asthe camera is within range of this transmitter, it will receive power from it. Another option is to connect it to a battery through an adapter.
Definitely yes! As long as the camera is connecting to the internet, you can access the camera anytime and anywhere. Remote access is available via phone’s 3G/4G/5G data network.
Wireless signals don’t extend very far – 300 feet at most without a wall or anything else to block the signal. A wired system will provide a more reliable signal. Additionally, the video quality will always remain consistent as it won’t be susceptible to bandwidth fluctuations.
In order to be sure, point the camera at a known source of infrared light – a TV remote is one. When you press a button on the remote, you’ll see a small flash of light on your phone – this is what you’ll be looking for. So, scan the room and be on the lookout for similar light sources.
Most of the wireless routers and access points state they can support about 250 devices connected at once. This WiFi connection number includes computers, cameras, tablets, mobile smartphones, appliances, and a wide variety of other devices that are now internet-enabled.
In general, security cameras, either CCTV analog cameras or PoE IP security cameras, are not energy-consuming as other gadgets like computers or bread toasters; they only need very little electricity to work.
VIDEO
Download the tool on www.mipcm.com. More information about the MIPC, you can scan the QR code
Download on the website: http://www.mipcm.com/publish/manual/index.html
Documents / Resources
 | Wireless IP Camera |
References
- User Manualmanual.tools
Camera wont power on
Why is my Conico Wireless IP Camera not powering on?
If your Conico Wireless IP Camera is not powering on, please follow these troubleshooting steps based on the installation guide:
If the camera remains completely unresponsive after these steps, you may contact Conico support at support@i-conico.com.
Read the full Q&A page
Were you ever able to figure this out, mine will not turn on either
my cameras will not connect to the server. They will connect to the router but only through the camera QR code option, not the sound option. I had two other camera bought a while back and they connected fine but since trying to add the new cameras they old ones will not connect anymore as well. I have done all of the toubleshooting options. Nothing is working.
Why are my Conico cameras failing to connect to the server even after connecting to the router via QR code?
Based on the Conico Wireless IP Camera manual and common troubleshooting for the MIPC app, here are the steps to address your server connection and multi-camera issues:
If these steps do not resolve the issue, you can contact Conico support directly at support@i-conico.com.
Read the full Q&A page
Hello,
Why is there a lock icon on my live view on the app?
Also asking for a password when I click on it
I put in the password and it states it’s incorrect
I have the Camera that is in the website below
Please help
Why is there a lock icon on my live view on the app?
Also asking for a password when I click on it
I put in the password and it states it's incorrect
I have the Camera that is in the website below
Please help
Why is there a lock icon on my live view and why is my password being rejected?
The lock icon on your live view typically indicates that the camera's privacy mode is active or that the device requires a specific device password (different from your account password) to access the stream. If you are receiving an "incorrect password" error when clicking it, please try the following steps:
If the issue persists, you can contact Conico support directly at support@i-conico.com.
Read the full Q&A page
how do i get the conico model FI 362B camera to pan and tilt from my app.
How do I control the pan and tilt functions for the Conico FI 362B camera using the app?
To control the pan and tilt functions of your Conico camera, you must use the MIPC app. While the specific manual for the FI 362B is not fully detailed here, Conico cameras typically use the following interface controls within the MIPC app:
Important Note: The manual provided in this context is for a "Fixed Camera" (as seen on page 6, Step 2), which does not support motorized pan and tilt. If your FI 362B model is a PTZ-capable camera, ensure you selected "PTZ Cameras" instead of "Fix Cameras" during the initial setup in the MIPC app to enable these controls. If the camera was added as a fixed device, you may need to delete it and re-add it as a PTZ camera.
For further assistance, you can contact Conico support at support@i-conico.com.
Read the full Q&A page
How can I reset the password on my camara I have a conico 837
How do I reset the password for my Conico 837 camera?
To reset the password on your Conico camera, you must perform a factory reset to return the device to its default state. Follow these steps:
Note: Do not remove the power cable during the factory reset process. If you have forgotten your MIPC app account password (rather than the camera device password), you can use the Binding Email function on the login screen to recover it, provided you linked an email address during registration.
Read the full Q&A page
how to change defult 80 port camera model f300
How do I change the default port 80 on the Conico F300 camera?
The provided manual for the Conico Wireless IP Camera (which uses the MIPC application) does not explicitly list a setting for changing the HTTP port (default 80) within the mobile app interface. Typically, for Conico cameras using the MIPC platform, port settings are managed through the PC client or a web browser interface rather than the mobile app.
To attempt to change the port, follow these general steps:
If you are trying to access the camera from outside your network, it is often easier to use Port Forwarding on your router to map an external port (e.g., 8080) to the camera's internal port 80, rather than changing the port on the camera itself. If you require further technical assistance for the F300 model, you can contact Conico support at support@i-conico.com.
Read the full Q&A page
I have four cameras and about 4 months ago one looked like explored and it was replaced, no I have another that won’t turn on, took it down and it looks like it charge but won’t turn on.
Why won't my Conico wireless camera turn on even though it appears to be charging?
If your Conico camera appears to be charging but will not turn on, please try the following troubleshooting steps based on the manual:
Read the full Q&A page
Camera just stopped recording. Still get notifications of motion but no video. If by chance there is a video you cannot play it back. I’ve tried resetting, re-downloading camera and app. Still nothing. Can view live stream that’s it. Pretty sad, camera is only a little over a year old and has been working great.
Why has my Conico camera stopped recording and why am I unable to play back videos despite receiving motion notifications?
Based on the Conico Wireless IP Camera manual and troubleshooting guide, if you are receiving notifications but cannot record or play back video, please check the following:
If these steps do not resolve the issue, you can contact Conico support directly at support@i-conico.com.
Read the full Q&A page
What sd card do i use
What type of SD card should I use with the CONICO Wireless IP Camera?
The CONICO Wireless IP Camera uses a Micro SD card for local video storage. According to the manual, you should note the following regarding the SD card:
While the manual does not specify a maximum capacity, most cameras in this class typically support up to 128GB; however, it is recommended to use a high-quality Class 10 or higher card for reliable HD video recording.
Read the full Q&A page
model 812e has a damaged QR code sticker…is there any way to recover that number?
per my order it’s serial# AZ:KXZCW6WWCBHABNMB3K7EEC5OFM
per my order it's serial# AZ:KXZCW6WWCBHABNMB3K7EEC5OFM
How can I recover the device ID or serial number if the QR code sticker on my Conico 812e camera is damaged?
If the QR code sticker on your Conico camera is damaged, you can still add the device to the MIPC app using the manual ID entry method. Follow these steps:
If you cannot find the ID on the hardware and the manual entry fails, please contact Conico support at support@i-conico.com with your order details and the serial number you provided to request your specific Device ID.
Read the full Q&A page