CONCEPTRONIC BIAN08G Type B Card Reader
Specifications
| Connector | USB-C male |
| USB version (Speed) | USB 3.2 Gen 2 (10Gbps) |
| Memory card supported | CFexpress Type B |
| Capacity | 2TB |
| Material | Aluminum alloy + ABS |
| Dimensions (W x D x H) | 64 x 60 x 15 mm |
| Cable length | 15cm |
| Weight | 50g |
| Package contents | BIAN08G
Quick Installation Guide |
Product Usage Instructions
Safety Precautions:
- Avoid leaving packaging materials within reach of small children.
- Avoid dropping, throwing, or crushing the device.
- Do not open, change, or damage the device.
- Disconnect the product from the hands before cleaning.
- Clean the product with a dry, fiber-free cloth.
Disposal:
Dispose of the product at a recycling point. Do not dispose of it with household waste to prevent harm to the environment and injury.
CE / UKCA Marking:
The product complies with the directives listed in the ‘Declaration of Conformity’.
INSTALLATION
System Requirements
- Windows 7/8/10/11
- macOS, ChromeOS, Android
- PC, laptop with available USB-C port
Installation and usage
- Connect the card reader to a compatible USB-C port on your computer (USB 3.2 Gen 2 is recommended for optimal performance).
- Carefully insert your CFexpress Type B card into the card reader slot until it is fully and securely seated. No drivers are required.
- Before disconnecting the card reader or removing the CFexpress card, safely eject it from your computer to prevent data loss.
Safety and warning instructions
Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling in this manual, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
- Keep the device away from water, humidity, fire or hot environments.
- Keep your device and all its parts and accessories out of the reach of small children.
- Do not leave the packaging material lying around carelessly. This may become dangerous playing material for children.
- Avoid dropping, throwing or crushing the device.
- Do not open, change or damage the device.
- Disconnect the product from the mains before cleaning.
- Clean the product with a dry, fibre-free cloth.
Disposal of waste electrical equipment: Dispose of the product at a recycling point. Do not dispose of together with household waste. Incorrect storage/disposal can harm the environment and/or cause injury.
CE / UKCA marking: Conceptronic declares that this product complies with the directives listed in the section ‘Declaration of Conformity’.
Need Help?
Digital Data Communications GmbH – Im Defdahl 10 F, 44141 Dortmund, Germany CONCEPTRONIC® is a registered trademark of Digital Data Communications GmbH © Copyright Digital Data Communications GmbH. All Rights Reserved.
FAQ’s
Q: What are the system requirements for this product?
A: Windows 7/8/10/11, macOS, ChromeOS, Android. PC or laptop with an available USB-C port.
Q: How should I clean the product?
A: Use a dry, fiber-free cloth to clean the product. Ensure it is disconnected from the hands before cleaning.
Q: What should I do with the product when I no longer need it?
A: Dispose of it at a recycling point. Do not mix it with household waste to prevent environmental harm.
Documents / Resources
 |
CONCEPTRONIC BIAN08G Type B Card Reader [pdf] Installation Guide BIAN08G, BIAN08G Type B Card Reader, Type B Card Reader, Card Reader, Reader |