MODELE
Assembly Instructions
IMPORTANT NOTE: Use these instructions for MODELE assembly.
MODELE
Weight: 65 lb (29 kg)
Dimensions: 8 ft x 2 ft (244 cm x 61 cm)
Space Required for Use: 9 ft x 4 ft (274 cm x 122 cm)
Weight Capacity: 500 lb (227 kg) as tested by Concept2*
*300 lb (135 kg) as tested per European Stationary Fitness Equipment Testing Standard EN 20957-7
Assembly Tip
Do not fully tighten screws until all screws are in place.
Documents / Resources
 |
concept2 C2PM5 Rower Model E [pdf] Installation Guide C2PM5, Rower Model E |
