COMPEX WLW7002E56 Wireless Modules Instruction Manual

DC Power 5V (Max)
Power Consumption 13.6(Max)
For the customer who wants to use a 5V External Power Pin, please make sure pins 15, 17, 19, 21, and 23 are not connected with your board.
Pins 52, 53, and 55 support either 1.8V or 3.3V. However, it’s important to note that you can only select one voltage option for these pins.
The default voltage for pins 52, 53, and 55 is 1.8V.

M.2 Edge Connector Pin Assignment

M.2 edge connector pin assignment
Top side		Bottom side
1	GND	2	VDD_3V3
3	REFCLK_IO_P0	4	VDD_3V3
5	REFCLK_IO_N0	6	PCIE_LED0
7	NC	8	NC
9	NC	10	NC
11	NC	12	NC
13	NC	14	WSI_DAT_OUT
15	VDD_5V	16	PCIE_LED1
17	VDD_5V	18	GND
19	VDD_5V	20	WSI_CLK_OUT
21	VDD_5V	22	NC
23	VDD_5V
Mechanical key E
33	GND	32	WSI_DAT_IN
35	PCIE0_RX0_P	34	NC
37	PCIE0_RX0_N	36	WSI_CLK_IN
39	GND	38	NC
41	PCIE0_TX0_P	40	NC
43	PCIE0_TX0_N	42	NC
45	GND	44	PTA1_BT_PRIO
47	PCIE0_REFCLK_P	46	PTA1_WL_ACT
49	PCIE0_REFCLK_N	48	PTA1_BT_ACT
51	GND	50	NC
53	PCIE0_CLKREQ_N	52	PCIE0_RST_N
55	PCIE0_WAKE_N	54	NC
57	GND	56	WLAN_DISABLE
59	PCIE0_RX1_P	58	NC
61	PCIE0_RX1_N	60	NC
63	GND	62	NC
65	PCIE0_TX1_P	64	NC
67	PCIE0_TX1_N	66	NC
69	GND	68	NC
71	REFCLK_IO_N1	70	NC
73	REFCLK_IO_P1	72	VDD_3V3
75	GND	74	VDD_3V3

Copyright © Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of Compex Systems Pte. Ltd.
While every effort is made to ensure the information is accurate, Compex does not accept liability for any errors or mistakes that may arise.
All specifications are subject to change without notice.
Compex Systems Pte Ltd www.compex.com.sg (+65) 6288 8220 sales@compex.com.sg
Last Updated: 10/01/2024 MW, LL, GS, AT

Instruction Manual · WLW7002E56 Wireless Modules, WLW7002E56, Wireless Modules, Modules

Published: September 3, 2024

Updated: September 4, 2024

Ask a Question