COMMSCOPE WAVEGUIDE-RIGID-TWIST 90 Degree Rigid Twist Rectangular Waveguide
INTRODUCTION
CommScope offers a complete selection of microwave connectivity accessories to optimize your backhaul installation and performance.
Rectangular (rigid) waveguide components are built with a rectangular cross section and are most commonly used as a final assembly point in the equipment rooms, connecting to the radios.
Product Classification
- Product Type Rectangular waveguide, rigid twist
General Specifications
- Interface CPR112G | CPR137G | CPR90G | PDR100 | PDR84 | UDR70
- Interface 2 CPR112G | CPR137G | CPR90G | PDR70 | UDR100 | UDR84
Dimensions
- Waveguide Size WR112 | WG15 | R84 | WR137 | WG14 | R70 | WR90 | WG16 | R100
Electrical Specifications
- Operating Frequency Band 5.85 – 8.2 GHz | 7.05 – 10.0 GHz | 8.2 – 12.4 GHz
Material Specifications
©2023 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names, trademarks and registered trademarks are property of their respective owners. Revised: August 24, 2023Finish Gray
Documents / Resources
 |
COMMSCOPE WAVEGUIDE-RIGID-TWIST 90 Degree Rigid Twist Rectangular Waveguide [pdf] Owner's Manual WAVEGUIDE-RIGID-TWIST 90 Degree Rigid Twist Rectangular Waveguide, WAVEGUIDE-RIGID-TWIST, 90 Degree Rigid Twist Rectangular Waveguide, Twist Rectangular Waveguide, Rectangular Waveguide, Waveguide |
