COMMSCOPE PPL-AP-6-MPO16-ALL-A Propel Pass Through Adapter Pack
Introduction
Propel pass-through adapter pack, 6 MPO16 ports, Type A
- Can be installed and removed from the front or rear of the panel
- For use with MPO16 applications
- All adapter pack sizes are interchangeable within Propel panels or blades
- This component requires 3 of the 12 lanes on the Propel Panel blade
Product Classification
- Regional Availability Asia | Australia/New Zealand | EMEA | Latin America | North America
- Portfolio SYSTIMAX®
- Product Type Fiber adapter pack
- Product Brand Propel
- Product Series PPL
General Specifications
- Adapter Color Black
- Interface MPO
- Interface Feature Dust caps | Internal shutters | Key down
- Total Ports, quantity 6
Dimensions
- Height 11 mm | 0.433 in
- Width 98 mm | 3.858 in
- Depth 170 mm | 6.693 in
Optical Specifications
- Fiber Mode Multimode | Singlemode
Environmental Specifications
- Safety Standard c-UL-us
Packaging and Weights
- Packaging quantity 1
Regulatory Compliance Certifications
Agency Classification
- CHINA-ROHS Below maximum concentration value
- REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
- ROHS Compliant
- UK-ROHS Compliant
CONTACT
©2024 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names, trademarks, and registered trademarks are the property of their respective owners. Revised: September 13, 2024
Documents / Resources
 |
COMMSCOPE PPL-AP-6-MPO16-ALL-A Propel Pass Through Adapter Pack [pdf] Owner's Manual PPL-AP-6-MPO16-ALL-A Propel Pass Through Adapter Pack, PPL-AP-6-MPO16-ALL-A, Propel Pass Through Adapter Pack, Pass Through Adapter Pack, Through Adapter Pack, Adapter Pack, Pack |