Commend 200 Series Intercom System
Product Information
Specifications
- Model: Master Station Series
- Compatible with: GE 100, GE 200, GE 700 intercom centrals
- Series Available: 200, 400, 411
Descripation
Important Precautions
- Please keep this description in safe custody!
- Range of Application: As stations for the intercom centrals GE 100 (only series 400 and 411), GE 200 and GE 700.
- Attention:
- Never push objects of any kind into the station through loudspeaker or microphone slots.
- Ensure no liquid enters the housing.
- The station may be opened only by authorized service engineers.
- Avoid dropping the station.
- Do not expose the station to extreme temperatures.
- Cleaning:
- Use a soft, lint-free cloth for cleaning.
- Remove stubborn stains with a cloth lightly dampened with a mild detergent solvent.
- Never use strong solvents, abrasive cleaners, or compressed air for cleaning.
- Connection:
- Plug the station only into predefined sockets, never into telephone or computer sockets.
- Use only the enclosed connector cable.
- Never plug other equipment into the intercom station sockets.
Operating Instructions
Make A Call
- Dial the desired calling number.
- Talk after the Dial Tone.
- Cancel the call: X
Handset Function
- For private conversations (only EE 411, EE 420, EE 211, EE 220): Hold the loudspeaker grill to the ear.
Control Of Speech Direction
- Calls to noisy rooms may require manual control of the speech direction (Simplex).
- Talk: keep T pressed.
- Listen: release T.
Called Number Busy
- Wait for automatic re-call (Busy Tone can be switched off with 0, or Intrude with T (keep button pressed while talking)).
Send Re-call Request *
- Called subscriber is busy, in privacy mode or does not answer.
- Send re-call request: 5 – Call is cancelled automatically.
- Delete re-call request: call subscriber once again, 6 – Call is cancelled automatically.
Receive Re-call Request *
- The number of the station that has called is indicated blinking in the display, the Conversation Lamp blinks.
- Answer re-call request:
F or dial the calling number (stations without function keys can also answer with 5T) – Call is set up, re-call request is cancelled automatically. - Cancel re-call request without answer: press X for at least one second.
Minute Tone
- Single Minute Tone: a call is running.
- Double Minute Tone: a call is holding for you or your conversation partner.
- Triple Minute Tone: the conversation time expires in a few seconds, but you can extend it with 77.
Inquiry *
- 0 – Tone Signal is heard.
- Dial the desired number – Talk after the Dial Tone.
- X: another number can be dialed, or X once more: back to previous conversation partner.
Transfer *
- 0 – Tone Signal is heard.
- Dial the desired number – Talk after the Dial Tone.
- Connect your conversation partner with your previous conversation partner: 0
Microphone Cut-off
- During a running call: With 7 the call can be disconnected temporarily – the waiting subscriber receives a Tone Signal (Privacy Tone) and the Conversation Lamp blinks.
- Reconnect the call with 7.
All Call / Group Call with Answer
- Initiate All Call with 00 (Group Calls with 010 to 019, depending on the programming) – Talk after Gong Signal, as soon as Conversation Lamp lights.
- Terminate announcement: T wait for answer, or X cancel call without answer.
- Answer All Call/Group Call with TT.
Secretary Transfer
- Activate with 02 and the calling number of your secretary station – Acknowledgement Tone (EE 411/EE 211 can be turned to the side for activation).
- Deactivate with 030 – Continuous Tone (or turn back station).
Door Opener
- During running call with the Door Station: Open the door with 1.
Follow Me
- Only EE 411, EE 211.
- Own station: turn to the side to activate.
- Target station: 02 and your own calling number – Acknowledgement Tone.
- Deactivate: turn back your own station.
Conference *
- During a running call: Invite further participants: – 8 – Tone Signal is heard – Dial the desired number – Talk after the Dial Tone.
- Repeat for each participant.
- Start the conference: 8T.
- Participant who wants to talk: T.
- Terminate the conference: X.
Privacy
- Activate: 031 – Acknowledgement Tone (EE 411/ EE 211 can be turned to the side for activation).
- Answer call: any button (or turn back station).
- Deactivate: 030 – Continuous Tone (or turn back station).
Reconnect Last Call
- 0T – Talk after the Dial Tone.
Background Music
- Switch on: 4T1 (up to 4T8 with several music programs).
- Switch off: 4T0.
Display-Information
- Not with EE 400, EF 400, EE 470.
- Different functions depending on central type and programming, but in general:
- Idle Mode: If no call is running the own calling number is displayed, e.g.:
- Conversation: During a conversation the calling number/name of the conversation partner is displayed, e.g.:
- Waiting subscriber: A busy subscriber called by another station gets the following indication:
- Double Minute Tone
- The calling number of the waiting station is blinking in the display
- Afterwards the conversation partner is indicated again
- Privacy Function: Activated Privacy is indicated in the display, e.g.:
- During an activated Call Transfer (e.g. Secretary Transfer) the target of the transfer is indicated, e.g.:
- Display Texts can be freely programmed, e.g.:
Tone Signals
Volume
- During a conversation the volume can be adjusted with
.
File: B_400DE.CHP
Version: 1.4/1100
Type: D-BA-400DE
This equipment fulfills the requirements of the EU-standard 89/336/EWG (Electromagnetic Interferences, EN 55022/50082-1). Therefore, this station is CE-labelled.
The features depend on the type of subscriber card, the software version, and the programming.
* For central GE 100 available from software Pro 03
FAQ
How do I make a call?
Dial the desired calling number and talk after hearing the Dial Tone. To cancel the call, press X.
Documents / Resources
 |
Commend 200 Series Intercom System [pdf] Instruction Manual 400 Series, 411, 200 Series Intercom System, 200 Series, Intercom System |