CMS-10R Wireless Remote Control Relay
“
Specifications:
- 6 configurable Inputs: AC 0 … 240 V, DC 0 … 48 V, DC 0 …
10 V, DC 4 … 20 mA - 4 CO Relay Outputs
- Communication Channels: 2G, 3G, 4G, VPN, TLS
- IoT Portal: https://iot.comatreleco.com
Product Usage Instructions:
1. Setup a Device:
To set up the device, follow these steps:
- Connect the device to a power source within the specified
voltage ranges. - Access the IoT Portal at https://iot.comatreleco.com to
create a user account. - Configure the device inputs based on your requirements using a
PC, smartphone, or tablet.
2. Use the Device:
To use the device efficiently, consider the following:
- Utilize the 6 configurable inputs for receiving different types
of signals. - Take advantage of the communication channels like SMS, email,
and voice calls for notifications. - In case of IoT portal unavailability, SMS fallback ensures
continuity in communication.
3. Application Examples:
Explore various application examples to understand the
versatility of the CMS-10R device.
FAQ:
Q: What are the main differences between CMS-10F and
CMS-10R?
A: The main differences include updated device versions and
additional features like SMS fallback in CMS-10R.
Q: How can I find the unique unit phone number for SMS
messages?
A: The unit phone number can be found on the overview of the
unit in the IoT Portal under the CMS-10R section.
“`
14.07.2025
CHF / EN
USER INFORMATION
CMS-10R
Index
Page
1. System overview
3
2. Communication channels
5
3. IoT Portal https://iot.comatreleco.com
6
4. Setup a device
17
5. Use the device
27
6. Application examples
32
More than a simple SMS relay
ComatReleco Messaging System CMS-10R
6 configurable Inputs
AC 0 … 240 V DC 0 … 48 V DC 0 … 10 V DC 4 … 20 mA
4 CO Relay Outputs
2G | 3G | 4G VPN TLS
ComatRelecoIoT-Portal
iot.comatreleco.com
Push notification E-Mail SMS Voice Pager
SMS fallback Call-in function
2 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
1. System overview
Digital and analog inputs: Three device types are available, with different inputs
Plug and Play: Wireless programming via the internet with PC, smart phone or tablet.
AC 0 … 240 V
DC 0 … 48 V
DC 0 … 10 V
DC 4 … 20 mA
PC
6 Inputs
App and E-Mail, additionally SMS: Push, e-mail, pager notification, voice call or SMS as standard communication options. They use the bidirectional communication channels according to their needs.
Easy device swap: Upload the existing configuration file to the new CMS-10R.
All in one: The CMS-10R has full out-ofthe-box functionality. Mobile communication is included.
ComatReleco Messaging System CMS-10R
The CMS-10R is a remote monitoring and control system for industrial and building technology. It reports status changes to the digital or analogue inputs via the mobile phone network by push notification, email, pager notification, voice call or SMS. The outputs are controlled via the Smart App web browser. If necessary, the configured outputs can also be switched with SMS control messages and a call-in function (call to the device). The CMS-10R automatically selects the network generation with the highest field strength at the installation site.
3 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
1. System overview
Main differences to older version of CMS
CMS-10F
CMS-10R
· 2G communication. · Separate SIM card from a mobile service provider of your
choice. · Communication costs incurred by service provider. · Configuration via RS232 cable link.
· Size 88 x 90 x 55 cm. · Different hardware versions with 6 inputs / 4 outputs.
· Notification and control via SMS.
· 2G, 3G and 4G communication.
· Integrated eSIM, works worldwide.
· Communication costs covered with the chosen service profile from ComatReleco IoT portal.
· Configuration via IoT portal. Configurations from old devices can be overtaken.
ComatRelecoIoT-Portal
iot.comatreleco.com
· Same size.
· Matching hardware versions available
· Wiring schematics remains the same as with CMS-10F, one-to-one replacement.
· Notification and control via push, e-mail, pager notification, voice call or SMS. Call-in and fallback functions included.
Previous version CMS-10F/AC110-240V CMS-10F/DC12-48V oder CMS-10ADF/DC12-48V CMS-10ACDF/DC12-48V
Current device version CMS-10R-D/AC110-240V CMS-10R-DA/DC12-48V CMS-10R-DAC/DC12-48V
4 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
2. Communication channels
ComatReleco Messaging System CMS-10R
6 configurable Inputs
AC 0 … 240 V DC 0 … 48 V DC 0 … 10 V DC 4 … 20 mA
4 CO Relay Outputs
2G | 3G | 4G VPN TLS
ComatRelecoIoT-Portal
iot.comatreleco.com
Push notification E-Mail SMS Voice Pager
SMS fallback Call-in function
The CMS-10R unit receives SMS messages with the unique unit phone number from the integrated eSIM. Same number is valid for call-in and SMS fallback.
SMS fallback is used in the rare occasion when the IoT portal is not available, i.e. during this time, SMS will be sent instead of email and push notifications.
The ComatReleco-IoT-Portal transmits SMS messages by default * with the number +41 79 807 55 54
SMS and Pager messages to machines are sent by default * with the number +41 79 807 20 06
We recommend to store this numbers on the mobile phone under the name «CoReM»
The number of the CMS-10R unit can be found on the overview of the unit in the IoT Portal.
Example: +41 77 129 24 10
* For large projects, it is possible to create customer, local numbers at additional cost.
We recommend to store this number on the mobile phone under the device name.
5 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
3. IoT Portal
https://iot.comatreleco.com
All users need to have an account. Installers/owners also have the possibility to create user accounts, see page 15. Exceptions are «machines» as defined on page 16.
Choose the language
Apps are available for android and apple.
6 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
3. IoT Portal
User account
* = Mandatory fields Defines the language of the IoT portal (can later be changed) The country code influences the billing of the service profile VAT number: Needed for businesses who claim VAT back Postal address International format: +41 23 123 45 67 (where messages from CMS-10R are being sent to E-mail address: (where e-mails from CMS-10R are being sent to)
7 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
3. IoT Portal
Account overview
My owned devices: The devices I pay the invoice for with my account.
My assigned devices: Devices from another account which I am a user of.
My installed devices: Devices I am the installer for, I can be the owner or someone else.
Buy SMS package
Shows the number of SMS available for the account (for all devices under this account).
Change language
Status information
Service profile
Included SMS available for the device per month, depending on the service profile.
8 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
3. IoT Portal
Device overview
Choose a device in the account overview
Managers
Device details
Connectivity
Link for documentation and release information.
I/O monitoring / control
9 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
3. IoT Portal
Device connection (fallback mode)
Normal operation
IoT portal is not available Device switches to fallback mode, i.e, during this time, SMS will be sent instead of email and/or push notifications. i see next page No or very poor connection with mobile network. Events are stored in the device and sent once connection is re-established.
10 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
3. IoT Portal
Device in fallback mode
In the unlikely case the device is in fallback mode and you might need to switch one or more outputs during this time, configure the device in advance accordingly.
Time after the activated output will be switched off again (00:00:01 to 23:59:59 hours possible). Must be defined by call-in activation.
i For security, the message can have a form of a password
or similar, e.g. +23@LED_on
i As another security measure, you can choose that only
registered users can control it.
i As a security measure, by default,
only registered users can control it.
It is possible to control the output with an SMS message.
It is possible to control the output by call-in, i.e. call the phone number of the device.
In fallback mode a SMS message «Status» can be sent to the device, it returns the status of all inand outputs.
11 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
3. IoT Portal
Add a device to your account
Set up a new device … (see page 14)
Accept and add a device to your account with an invitation code from another account (assigned device). The code has been received by e-mail or SMS.
12 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
3. IoT Portal
Roles / business relationship with ComatReleco
Installer
By default, the installer is also the owner. If you are not the owner (the bill recipient), you can transfer the device to the owner`s account under «Change owner».
The owner receives the invoice.
Owner
This means that the invoice is paid by the holder of this account.
The owner pays the invoice
Bought SMS packages on the account cannot be transferred to another account.
Under «Manage» on the IoT Portal you can see who the installer and the owner of the device is.
If the owner is wrong (the invoice recipient), it can be changed here.
13 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
3. IoT Portal
Setup a new device
Choose if you are the owner, i.e. it will be your account paying the invoice, or not.
Enter a device name (notifications and messages are being sent with this name). Choose the model.
If you are not the owner, you have to enter a valid e-mail address of the owner, he will then receive an email to accept the ownership. In this case you are the inststaller for someoneelses device.
You can now choose to pair, configure the device or go back the overview (Home page)
14 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
3. IoT Portal
Add another user to use a device
Number of users / machines according service profile (4, 10, 30).
Invite another user to use your device either by e-mail or SMS. The invited user receives a code to add the device in his account.
Installer / owner has here the possibility to create an account for another user.
Different access levels can be chosen for the user.
15 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
3. IoT Portal
Add a «machine» to use a device
Is the user not a human being, e.g. a pager, alarm server, or other machine, to receive messages, it can be added here. It needs at least a phone number or an e-mail address.
SMS to machine
It is also possible to define a CMS-10R itself as a machine, making it a very simple control system (see also page 34).
It is also possible to define a person as a machine to receive SMS only, without having to fill in all information needed for a user. They could then also send SMS to the device or callin to activate an output.
SMS to machine is sent without header and timestamp, so it is compliant to most machines, such as pager, alarm servers, etc.
16 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
4. Setup a device
Configure a device
Go to «Manage» on your device.
The device itself is set to UTC (GMT), https://www.timeanddate.com/worldclock/, therefore, set the time zone where you are, UTC+/-x, to have the correct time of the event.
17 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
4. Setup a device
Configure a device
Choose the input you want to configure.
Activate the input to use it.
Choose analog or digital.
All status events can be configured here.
Notifications, confirmation loops.
Sequential notification in the order of the users until the first one acknowledges the message. Number of loops according service profile (1, 3, 5).
18 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
4. Setup a device
Configure a device
Choose the output you want to configure.
Activate the output to use it.
Time after the activated output will be switched off again (00:00:01 to 23:59:59 hours possible). Must be defined by call-in activation.
It is also possible to control the output by call-in, i.e. call the phone number of the device.
It is possible to control the output with an SMS message.
i As a security measure, only registered
users can call.
i For security, the message can have a form of a pass-
word or similar, e.g. +23@LED_ein
i As another security measure, you can choose that
only registered users can control it.
19 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
4. Setup a device
Configure a device
After you finished configuring the device, go back to «Manage» on your device.
You can export the configuration and save it, a file .json will be created.
20 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
4. Setup a device
Configure a device
To configure a new device, an existing configuration file can be imported. Also from an older generation CMS-10F device.
21 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
4. Setup a device
Pair a device
Remove the cover. 1. Enter serial number.
Pair device, i.e. connect the device with the IoT Portal and overtake the configuration. Make sure that the device is powered on. Then press «Pair». With paring the device, the service profile starts, i.e. start of invoicing.
3. Press «Pair».
2. Click «Pair»
22 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
4. Setup a device
Firmware update
ComatReleco continuously enhances the functionality of the CMS-10R system according customer needs, wishes and other feedback. Firmware updates include new functionalities and bug fixes.
The update takes about 2 minutes. During this time the device is not sending messages, etc. The device will restart after the update.
The window apprears in case a new firmware is available.
23 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
4. Setup a device
Service profiles
3 different service profiles are available.
«Eco» and «Standard» are free of charge for the first year (starts when device is paired for first time). During the one-year term of the service profile, you can switch to the next higher service profile at any time. You can only switch to a lower service profile after the term has expired.
24 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
4. Setup a device
Service profiles
Shows current active service profile which can be changed here.
Possibility to «auto renew» after one year.
SMS packages can be bought for an account.
Overview shows the number of SMS available for the account. All devices owned by this account can use SMS …
… when monthly SMS of the device have been used.
25 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
4. Setup a device
Overview of your account settings
Activation recommended to ensure message transmission via SMS.
26 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
5. Use the device
Device overview
Manager
Device details
Connectivity
Link to documentation and release information.
I/O monitoring/control
App: ComatReleco IoT Portal
App for Android phones: Please make sure that the app is not part of the power saving mode as this would stop indicating push notifications!
27 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
5. Use the device
Create homescreen instead of using the app with android phones
Depended on android version and device type.
1
2
3
4
5
Create a «home-screen» until app is released (follow steps 1-4).
28 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
5. Use the device
I/O, Status messages / notifications
It is possible to add an acknowledgment loop.
Define the time to acknowledge a message.
Number of acknowledgment loops according service profile (1, 3, 5).
If a confirmation loop is selected, please note that a machine (or a person defined as a machine) cannot acknowledge the message. The machine only receives the notification message, without any link to confirm.
Define who will receive messages by push notification, email, pager notification, voice call or SMS. Max. message receivers per input/output according service profile (2, 5, 5).
Push
SMS
SMS to machine
SMS to machine is sent without header, so it is compliant to most machines, such as pager, alarm servers, etc.
29 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
5. Use the device
I/O, Status Messages / Notifications
E-mail
E-mail to machine
30 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
5. Use the device
Acknowledgement
Email (same on smart phone and PC)
Push on smart Phone
SMS
Push on smart PC
Acknowledge by clicking on the link.
Acknowledge by clicking.
Acknowledgement by entering the code and returning an SMS message.
31 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
6. Application example
Access control
Access control of a work yard from a community with different employees. Define an access code, i.e. SMS message, to switch an output. Distribute the access code to different people who can open the gate.
An employee sends the SMS code to CMS-10R. CMS-10R switches the output, an e-mail is being
sent to the manager that someone entered the work yard.
IoT Portal
Depot manager
CMS-10R
Staff member (doesn’t need to be registered
on the IoT portal)
work yard gate
32 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
6. Application example
Acknowledgement with acknowledgement loop
Acknowledgement of a message from monitoring a battery charge.
Level reaches threshold, input 1 of CMS-10R changes.
IoT Portal sends a push notification with acknowledgment request to receiver 1.
Not acknowledged within defined time. IoT Portal sends an SMS notification with acknowledgment request to receiver 2.
Not acknowledged within defined time. IoT Portal sends an e-mail notification with acknowledgment request to receiver 3.
Message receiver acknowledges.
Battery level
CMS-10R
IoT Portal
Push
Message receiver 1 is playing football and does
not see the message.
SMS
Message receiver 2 is in a meeting and cannot
read the message.
Message receiver 3 is in the office and acknowledges the
message.
33 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
6. Application example
Remote control
Remote switching.
Level reaches the defined threshold, Input 1 of CMS-10R (1) changes.
IoT Portal sends an SMS to CMS-10R (2) (defined as a machine) to switch output 1.
IoT Portal sends a message to message to the message receiver that output 1 is switched on.
Level Sensor
CMS-10R (1)
Message receiver
IoT Portal
CMS-10R (2) defined as a machine
CMS-10R (2)
34 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
6. Application example
Very simple control system
Measure the room temperature and switch the heater automatically on with information to the owner.
Temperature sensor indicates a temperature that reaches the threshold as defined in the configuration.
IoT Portal sends an SMS to the CMS-10R (defined as machine itself) to switch output 1.
IoT Portal sends a message to the owner that output 1 is switched on.
IoT Portal
Temperature sensor
CMS-10R
Heater
CMS-10R defined as a machine
35 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
6. Application example
Pager, alarm server
CMS-10R sends messages from a control box to a alarm server.
For example, the control box lost power, indicated on input 1.
IoT Portal sends an SMS to the pager, alarm server and an e-mail to the technical manager in charge.
The pager, alarm server sends an alarm to the service engineer on duty.
Control box
CMS-10R
pager,
alarm server defined as a
machine
IoT Portal
Service engineer on duty
Technical manager
36 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
37 ComatReleco CMS-10R | User Information | 45013-096-54-003_EN_CHF |
07.2025
ComatReleco AG | Birchstrasse 24 | CH-3186 Düdingen | Phone +41 31 838 55 77 | Fax +41 31 838 55 99 comatreleco.com | info@comatreleco.com | WorldofRelays.com
Documents / Resources
 |
Comat RELECO CMS-10R Wireless Remote Control Relay [pdf] User Manual CMS-10R-D-AC110-240V, CMS-10R-DA-DC12-48V, CMS-10R-DAC-DC12-48V, CMS-10R Wireless Remote Control Relay, CMS-10R, Wireless Remote Control Relay, Remote Control Relay, Control Relay |