Contents hide
1 CODE 3 C3100, C3900 Siren Speaker
2 Specifications
3 Product Usage Instructions
4 SAFETY INSTRUCTION
5 Installation and Mounting
6 Warranty
7 Customer Service
8 FAQ
9 Documents / Resources
9.1 References

CODE-3-LOGO

CODE 3 C3100, C3900 Siren Speaker

CODE-3-C3100-C3900-Siren-Speaker-PRODUCT

Specifications

  • Product Model: C3100/C3900
  • Compatibility: 2024+ Silverado EV
  • Power Requirement: High electrical voltages and/or currents
  • Installation: Professional installation recommended
  • Operation: Proper grounding is required for safety
  • Usage: Emergency warning and signaling

Product Usage Instructions

Safety Precautions

Before installation and operation, ensure that you have read and understood all safety information provided in the manual.

Installation and Mounting

  1. Remove the front fascia according to factory specifications.
  2. Attach the desired speaker to the bracket using the supplied hardware.
  3. Mount the speaker to the front bumper.
  4. Install the top side of the bracket into place using vehicle screws.
  5. Wire the speaker following the provided instructions.

SAFETY INSTRUCTION

  • IMPORTANT! Read all instructions before installing and using.
  • Installer: This manual must be delivered to the end user.
  • WARNING! Failure to install or use this product according to the manufacturer’s recommendations may result in property damage, serious injury, and/or death to those you are seeking to protect!
  • Do not install and/or operate this safety product unless you have read and understood the safety information contained in this manual.
    1. Proper installation combined with operator training in the use, care, and maintenance of emergency warning devices are essential to ensure the safety of emergency personnel and the public.
    2. Emergency warning devices often require high electrical voltages and/or currents. Exercise caution when working with live electrical connections.
    3. This product must be properly grounded. Inadequate grounding and/or shorting of electrical connections can cause high current arcing, which can cause personal injury and/or severe vehicle damage, including fire.
    4. Proper placement and installation is vital to the performance of this warning device. Install this product so that output performance of the system is maximized and the controls are placed within convenient reach of the operator so that they can operate the system without losing eye contact with the roadway.
    5. Do not install this product or route any wires in the deployment area of an airbag. Equipment mounted or located in an air bag deployment area may reduce the effectiveness of the air bag or become a projectile that could cause serious personal injury or death. Refer to the vehicle owner’s manual for the airbag deployment area. It is the responsibility of the user/operator to determine a suitable mounting location, ensuring the safety of all passengers inside the vehicle, especially avoiding areas of potential head impact.
    6. It is the responsibility of the vehicle operator to ensure that all features of this product work correctly. In use, the vehicle operator should ensure the projection of the warning signal is not blocked by vehicle components (i.e., open trunks or compartment doors), people, vehicles, or other obstructions.
    7. The use of this or any other warning device does not ensure all drivers can or will observe or react to an emergency warning signal. Never take the right-of-way for granted. It is the vehicle operator’s responsibility to be sure they can proceed safely before entering an intersection, driving against traffic, responding at a high rate of speed, or walking on or around traffic lanes.
    8. This equipment is intended for use by authorized personnel only. The user is responsible for understanding and obeying all laws regarding emergency warning devices. Therefore, the user should check all applicable city, state, and federal laws and regulations. The manufacturer assumes no liability for any loss resulting from the use of this warning device.

Installation and Mounting

  1. Remove the front fascia according to factory specifications.
  2. Attach the desired speaker to the bracket. Using hardware supplied in the bracket kit. See Figure 1.CODE-3-C3100-C3900-Siren-Speaker-FIG-2
    • Note: The washers supplied will fit between the speaker and the bracket.
  3. Using the supplied hardware. Mount the speaker to the front bumper. See Figure 2.CODE-3-C3100-C3900-Siren-Speaker-FIG-3
  4. Remove vehicle screw and install top side of bracket into place. See Figure 3.CODE-3-C3100-C3900-Siren-Speaker-FIG-4
    • Note: The images supplied are for a driver-side installation.
  5. Wire speaker. The final installation can be seen in Figure 4.CODE-3-C3100-C3900-Siren-Speaker-FIG-5
  6. Repeat Steps 2-4 to install onto the passenger side.

Warranty

Manufacturer Limited Warranty Policy:

  • The manufacturer warrants that on the date of purchase, this product will conform to the Manufacturer’s specifications for this product (which are available from the Manufacturer upon request).
  • This Limited Warranty extends for Sixty (60) months from the date of purchase.
  • DAMAGE TO PARTS OR PRODUCTS RESULTING FROM TAMPERING, ACCIDENT, ABUSE, MISUSE, NEGLIGENCE, UNAPPROVED MODIFICATIONS, FIRE OR OTHER HAZARD; IMPROPER INSTALLATION OR OPERATION; OR NOT BEING MAINTAINED UNDER THE MAINTENANCE PROCEDURES OUTLINED IN MANUFACTURER’S INSTALLATION AND OPERATING INSTRUCTIONS, VOID THIS LIMITED WAR-RANTY.

Exclusion of Other Warranties:

  • MANUFACTURER MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED. THE IMPLIED WARRANTIES FOR MERCHANTABILITY, QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE ARE HEREBY EX-CLUDED AND SHALL NOT APPLY TO THE PRODUCT AND ARE HEREBY DISCLAIMED, EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW.
  • ORAL STATEMENTS OR REPRESENTATIONS ABOUT THE PRODUCT DO NOT CONSTITUTE WARRANTIES.

Remedies and Limitation of Liability:

  • MANUFACTURER’S SOLE LIABILITY AND BUYER’S EXCLUSIVE REMEDY IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR UNDER ANY OTHER THEORY AGAINST MANUFACTURER REGARDING THE PRODUCT AND ITS USE SHALL BE, AT MANUFACTURER’S DISCRETION, THE REPLACEMENT OR REPAIR OF THE PRODUCT, OR THE REFUND OF THE PURCHASE PRICE PAID BY BUYER FOR NON-CONFORMING PRODUCT.
  • IN NO EVENT SHALL MANUFACTURER’S LIABILITY ARISING OUT OF THIS LIMITED WARRANTY OR ANY OTHER CLAIM RELATED TO THE MANUFACTURER’S PRODUCTS EXCEED THE AMOUNT PAID FOR THE PRODUCT BY THE BUYER AT THE TIME OF THE ORIGINAL PURCHASE. IN NO EVENT SHALL MANUFACTURER BE LIABLE FOR LOST PROFITS, THE COST OF SUBSTITUTE EQUIPMENT OR LABOR, PROPERTY DAMAGE, OR OTHER SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES BASED UPON ANY CLAIM FOR BREACH OF CONTRACT, IM-PROPER INSTALLATION, NEGLIGENCE, OR OTHER CLAIM, EVEN IF MANUFACTURER OR A MANUFACTURER’S REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. MANUFACTURER SHALL HAVE NO FURTHER OBLIGATION OR LIABILITY FOR THE PRODUCT OR ITS SALE, OPERATION, AND USE, AND MANUFACTURER NEITHER ASSUMES NOR AUTHORIZES THE ASSUMPTION OF ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH SUCH PRODUCT.
  • This Limited Warranty defines specific legal rights. You may have other legal rights that vary from jurisdiction to jurisdiction. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages.

Product Returns:

  • If a product must be returned for repair or replacement*, please contact our factory to obtain a Return Goods Authorization Number (RGA number) before you ship the product to Code 3®, Inc.
  • Write the RGA number clearly on the package near the mailing label. Be sure you use sufficient packing materials to avoid damage to the product being returned while in transit.
  • Code 3®, Inc. reserves the right to repair or replace at its discretion. Code 3®, Inc.
  • Assumes no responsibility or liability for expenses incurred for the removal and /or reinstallation of products requiring service and/or repair.; nor for the packaging, handling, and shipping; nor for the handling of products returned to sender after the service has been rendered.

Customer Service

FAQ

  • Q: Is professional installation necessary?
    • A: Professional installation is recommended to ensure proper setup and safety compliance.
  • Q: What precautions should be taken during installation?
    • A: Exercise caution with high electrical voltages and currents.
    • Ensure proper grounding to avoid potential hazards.

Documents / Resources

CODE 3 C3100, C3900 Siren Speaker [pdf] Installation Guide
C3100, C3900, C3100 C3900 Siren Speaker, C3100 C3900, Siren Speaker, Speaker

References

Leave a comment

Your email address will not be published. Required fields are marked *