Apricancelli lineari CSI724 Maniglia per cancello
Istruzzioni di stallazione
- Super-strong engineering polymer construction
- No rust, corrosion or staining
- Invert for left or right-hand swinging gate
Dimensione
Passi di stallazione
Ideal for use on metal, wood and vinyl gates.
The Gate Handle can be used for left-hand and right-hand swinging gates.
Place the gate handle at a suitable height on the gate frame. Fasten with 4 countersunk screws of a type suitable for the particular gate material being used.
For installation on metal or vinyl gates the screw holes may be predrilled as follows:
Dimensione di a vite: calibre 8
Dimensione di punta di trapanu: 9/64” (3.5 mm )
Per una versione scaricabile di Adobe Acrobat (.PDF) di a nostra GARANZIA À VITA Limitata, andate à u nostru websitu à www.ddtechglobal.com
Assistenza Clienti
800-878-7829
Sales@LinearGateOpeners.com
www.LinearGateOpeners.com
Hi-Performance Hardware
Documenti / Risorse
 |
Apricancelli lineari CSI724 Maniglia per cancello [pdfGuida d'installazione ll3gh-install_CSI724, CSI724 Gate Handle, CSI724, Gate Handle, Handle |
