Guida di l'utente di u connettore di cunfigurazione di u proxy CISCO

Connettore di cunfigurazione di u proxy

Specificazioni:

• Product Name: Connector
• Produttore: Cisco
• Usage: Proxy Configuration

Istruzzioni per l'usu di u produttu:

Configure a Proxy:

1. Access the Connector GUI and navigate to Configure HTTP
   Proxy.
2. Enter your proxy address in the dialog box displayed.
3. Refer to Table 1 for choosing the endpoint based on your Cisco
   Spaces Account.

Configure Basic Authentication for Proxy (Optional):

1. To set up basic authentication credentials, click Configure
   Username and Password.
2. Troubleshoot any configuration issues by selecting Troubleshoot
   and the Cisco Spaces URL.

Configure a Transparent Proxy:

1. Copy the proxy server certificate and proxy server CA bundle to
   the Connector using the scp command.
2. Login to the Connector CLI and validate the copied proxy
   certificate with the connectorctl cert validate command.
3. Import the proxy CA certificates and other certificates using
   the connectorctl cert updateca-bundle command.

FAQ:

Q: What should I do if I encounter issues during proxy
cunfigurazione?

A: If you face any problems during proxy configuration, you can
troubleshoot by following the steps mentioned in the user manual.
Additionally, you can reach out to our customer support for
assistenza.

Q: How can I choose the appropriate endpoint for my Cisco
Spaces Account?

A: You can refer to Table 1 in the user manual for guidance on
selecting the correct endpoint based on your Cisco Spaces
contu.

Proxy

· Configure a Proxy , on page 1 · Configure a Transparent Proxy , on page 3
Configure a Proxy
You can set up a proxy to connect the Connector to Cisco Spaces, if the infrastructure hosting the Connector is behind a proxy. Without this proxy configuration, the Connector is unable to communicate with Cisco Spaces To configure proxy on the Connector, you must do the following:

Prucedura

Passu 1

In the Connector GUI left navigation pane, click Configure HTTP Proxy. Enter your proxy address in the dialog box that is displayed.
Figure 1: Setup Proxy

Note Choose the endpoint based on your Cisco Spaces Account. For information on how to choose endpoints, see the Table 1.
Proxy 1

Configure a Proxy Figure 2: Configure Basic Authentication for Proxy (Optional)

Proxy

Passu 2

To configure the proxy’s basic authentication credentials, click Configure Username and Password. You can troubleshoot any issues in proxy configuration. Click Troubleshoot and select the Cisco Spaces URL.
Figure 3: Troubleshoot Proxy Issues

Proxy 2

Proxy Figure 4: Sample Run Test Results

Configure a Transparent Proxy

Configure a Transparent Proxy
To configure a transparent proxy on the Connector, you must do the following: 1. Copy the proxy server certificate and the proxy server certification authority (CA) bundle to the Connector. 2. From the Connector CLI, validate the proxy certificate. 3. From the Connector CLI, import proxy certificates. 4. From the Connector GUI, configure the proxy URL.

Prucedura

Passu 1 Passu 2

Copy the proxy certificate to the Connector using scp. The following is a sampu cumandamentu.
scp proxy-ca-bundle.pem spacesadmin@[connector-ip]:/home/spacesadmin/ scp proxy-server-cert.pem spacesadmin@[connector-ip]:/home/spacesadmin/
Log in to the Connector CLI, and validate the copied proxy certificate using the connectorctl cert validate command. The following is a sample output of the command:
[spacesadmin@connector ~]$ connectorctl cert validate -c /home/spacesadmin/proxy-ca-bundle.pem -s /home/spacesadmin/proxy-server-cert.pem Executing command:cert Command execution status:Success ———————–

Proxy 3

Configure a Transparent Proxy

Proxy

Passu 3 Passu 4

/home/spacesadmin/proxy-ca-bundle.pem and /home/spacesadmin/proxy-server-cert.pem exists /home/spacesadmin/proxy-server-cert.pem: OK Validation of certificate is successful
For more information on this command, see connectorctl cert validate.
Import the proxy certification authority (CA) certificates along with other certificates using the connectorctl cert updateca-bundle command. The following is a sample output of the command:
[spacesadmin@connector ~]$ connectorctl cert updateca-bundle -c /home/spacesadmin/proxy-ca-bundle.pem -s /home/spacesadmin/proxy-server-cert.pem
Executing command:cert Command execution status:Success ———————-/home/spacesadmin/proxy-ca-bundle.pem and /home/spacesadmin/proxy-server-cert.pem exist /home/spacesadmin/proxy-server-cert.pem: OK CA trust bundle updated successfully System reboot will happen in 10 seconds. Do not execute any other command.
For more information on this command, see connectorctl cert updateca-bundle.
In the Connector GUI left navigation pane, click Configure HTTP Proxy. Enter your proxy address in the dialog box that is displayed.
Figure 5: Setup Proxy

Note Choose the endpoint based on your Cisco Spaces Account. For information on how to choose endpoints, see the Table 1.
Figure 6: Configure Basic Authentication for Proxy (Optional)

Proxy 4

Proxy

Configure a Transparent Proxy

Passu 5

To configure the proxy’s basic authentication credentials, click Configure Username and Password. You can troubleshoot any issues in proxy configuration. Click Troubleshoot and enter the Cisco Spaces URL.
Figure 7: Troubleshoot Proxy Issues

Figura 8 : Sample Run Test Results

Proxy 5

Configure a Transparent Proxy

Proxy

Proxy 6

Documenti / Risorse

CISCO Proxy Configuring Connector [pdfGuida di l'utente Proxy Configuring Connector, Configuring Connector, Connector

Referenze

• Manuale d'usu