Club3D CSV-1384 HDMI 2 in 1 Bi-Directional Switch
INTRODUCTION
Thank you for purchasing our CSV-1384 Product. After unpacking the product, please make sure you have all the items provided and checked for any damages. In case of any missing/damaged parts please inform your supplier immediately.
You should have:
- 1X CSV-1384 HDMI™ 2-in-1 Bi-directional Switch for 8K60Hz or 4K120Hz
- QR Code for downloading the Quick Install Guide (QIG)
- The Club 3D CSV-1384 is a HDMI™ 2-in-1 Bi-directional Switch for 8K60Hz or 4K120Hz. It can switch either of two sources to one display or switch one source to either of two displays.
- Press the switch button to select channel 1 or channel 2. With a piece of 50cm length fixed HDMI™ cable (pigtail), this Switch not only reduces cost but also saves time for customers.
- This kind of HDMI™ Switcher routes high-definition video (in multiple resolutions and up to 8K60Hz) and digital audio from the sources to display units.
CONNECTION
How it works: From
To / To
From
Operation Procedures
- Decide whether you are going to use this product as a switch or as a splitter
- Connect the HDMI™ source(s) and HDMI™ display(s) respectively to the input and output ports of the product through HDMI™ Male/Male cables
- When powered up the switch will default to channel 1
- You can now switch to the desired channel
Note(s):
- When powered up the switch will default to channel 1
- It’s suggested to match an HDMI™2.1 cable whose length does not exceed 3m/9.84 ft, when in doubt Please consult your Club 3D representative for support
- The above data is obtained from the internal laboratory of Club 3D, the specific optimal cable length is subject to the actual situation.
Features
- HDMI™ 2-in-1 Bi-directional Switch for 8K60Hz or 4K120Hz, it can switch either of two sources to one display or switch one source to either of the two displays
- Support video resolution up to 7680x4320P@60Hz
- Support HDR
- HDCP pass-through
- support HDMI™2.1
- The toggle button can quickly switch between 2 video sources or 2 monitors, and the blue LED indicators on both sides indicate which port is chosen to work.
- It’s suggested to match a HDMI™2.1 cable whose length is better within 3m/9.84 ft
Supported resolutions
- Up to 8K60Hz or 4K120Hz Depending on the source signal
- Note: Please update your TV Firmware to the version that supports these resolutions/refresh rates!
- Please update your Graphic drivers on your PC and make sure that DSC1.2 is supported on your devices to support these resolutions/refresh rates!
- Please use one of our Extension/Adapter cables to connect to your devices: In case you need assistance choosing the correct cable,
- please visit our website www.club-3d.com, or feel free to mail us at support@club-3d.com and it will be our pleasure to assist you.
- Warning Safe Usage – Product Only to be used at altitude 2000 meters/6562 feet and below.
- Disclaimer: While we endeavor to provide the most accurate, up-to-date information available, the content of this document may be out of date or include omissions, inaccuracies, or other errors.
- Products might obtain a certification during their lifetime. This doesn’t change or alter the product specifications and/or performance in any way. Club 3D will provide the updated information on their website www.Club-3d.com at their discretion.
- Therefore Club 3D does not accept any rights claimed on the content of this document.
- Please refer to a full overview of our Legacy Terms and Conditions on www.club-3d.com.
- All other brand names are trademarks or registered trademarks and are the property of their respective owners. All content is subject to change without prior notice.
Copyright © 2023, Club 3D B.V. www.club-3d.com
- CSV-1384 QIG October-2023
Documents / Resources
 |
Club3D CSV-1384 HDMI 2 in 1 Bi Directional Switch [pdf] Installation Guide CSV-1384 HDMI 2 in 1 Bi Directional Switch, CSV-1384, HDMI 2 in 1 Bi Directional Switch, 2 in 1 Bi Directional Switch, Bi Directional Switch, Directional Switch, Switch |
