CLOCKAUDIO TS003 Capacitive Touch Switch Instructions

Providing multiple colours, the TS003 capacitive touch switch provides clear and precise visual operational status. With no moving parts, low-profile mounting and encapsulated electronics, TS003 also provides protection from office contaminants affecting its operation. Comes with modular under desk mount controller for easy install.

• Low profile mount capacitive touch switch facilitating click / pop free switching of a microphone from DSP.
• Self-calibrating.
• RGB LED provides multi-colour combination for clear precise visual status of microphone or other devices.
• No moving parts and employing surface mount technology, ensures extreme reliability, longevity and trouble free use.
• Electronic circuitry fully encapsulated to protect operation from spills or other contaminants.
• Terminated with RJ 45 connector and supplied with a touch switch controller (TS-C1) allows connection via CAT 5E patch cable back to CDT-100, CUI-2 or directly to DSP.
• Programmable via DSP to operate in PTT, PTM or latching modes.
• 12V DC operation using regulated power supply, CDT-100 or CUI-2.
• Fitted with 200mm cable that connects to SWITCH/TS-IN on TS-C1.
• RS-IN on TS-C1 provides external switch connectivity.
• Maximum current consumption for switch plus TS-C1 is 12V@75mA.
• Supplied with M15 nut for table fixing.
• Finished in clear polycarbonate.

TS-C1’s CONTROL/TS-OUT port wiring for connection to control system:

Recommendations:

1. For Installation pre-drill 16mm or 5/8” hole into table.
2. Ensure all connections are made prior to applying power.

Read More About This Manual & Download PDF:

Documents / Resources

CLOCKAUDIO TS003 Capacitive Touch Switch [pdf] Instructions TS003, Capacitive Touch Switch

References

• User Manual