clickclock Gingko Cube Click Clock Walnut Owner’s Manual

clickclock Gingko Cube Click Clock Walnut

Product Features

• displays time, date, and temperature alternately, or a permanent time-only sound-activated display, or a permanent display
• 12 and 24-hour formats can be selected (initial mode: 24-hour).
• weekday or weekend day alarm setting

Operating Buttons Introduction

• SET: Press and Hold to access the settings mode
• +: to scroll up the number in setting mode / to change temperature format in normal display mode
• -: to scroll down the number in settings mode/ to switch between weekday and Weekend day alarm in normal display mode
• To access the alarm setting
• V/S: to turn on or turn off Touch/ Sound Activation function / Press and Hold to set permanent time display only.

Year/ Date/Time Setting Instruction

( Important Notice: Make sure you start setting the clock within 5 seconds after accessing the setting mode, or it will revert to the non-setting mode.)

1. Press the SET button and hold it down for 3-5 seconds to access settings mode, and
2. The YEAR display number will be flashing.
3. Press the + or – button to select your required YEAR display number, then press SET to confirm, and the MONTH display number will be flashed. hing
4. Press the + or – button to select your required MONTH display number, then press
5. SET to confirm, and the DAY display number will be flashing.
6. Press the + or – button to select your required DAY display number, then press SET to confirm, and the HOUR display number will be flashing.
7. Press the + or – button to select your required HOUR display number, then press SET to confirm, and the MINUTE display number will be flashing.
8. Press the + or – button to select your required MINUTE display number, then press SET to confirm, and it will show up 24H display.
9. Press the + or – button to select 24H or 12H format display, then press SET to confirm and exit the setting. When in 12H format display, there will be a dot displayed on the top left of the display screen if the clock is in PM time.

Temperature and Date Format Setting Instruction

1. Press the + button to change the temperature format between Celsius and Fahrenheit when the clock is in normal display.
2. Press the + button and hold it down to change the date format between DD/MM and MM/DD.

Alarm Setting Instruction

• Press the button to access the alarm setting menu, and the display screen will show OFF, which means the alarm is currently off.
• To set your alarm time, press and hold down the button, and the display screen will change to 0:00.
• Then press the SET button, and the alarm hour section will be flashing.
• Press the + or – button to select your required alarm HOUR, then press SET to confirm and
• The alarm MINUTE display number will be flashing.
• Press the + or – button to select your required alarm MINUTE, then press SET to confirmand exit the alarm setting.
• To turn off the alarm, press and hold down the button, and the display will go back to OFF; to turn it back on, press and hold down this button again.
• To set weekday or weekend day alarm setting, press – button to change between SAL and 7AL when the clock is in normal display.

Sound Activation Function & Permanent Time Display Setting Instruction
The sound-activated function can be turned off, so the display will stay on permanently. But having this function turned on saves energy or saves the battery’s life. The clock can also be set to display time only, without alternating between date and temperature.

1. To turn on/off the sound activation function, simply press the ‘V/S’ button. Whenthe clock displays ‘on: SD’, it means the sound activation function is on. When the lock displays i–:S d’, it means the sound activation function is off.
2. Press and hold the V/S button for 3 seconds until a beep, the Clock will be set to time display only. To turn back to normal display, press and hold down the V/S button again until a beep.

Snooze Function Instruction

1. The clock comes with a snooze function. The snooze time is 5 minutes each time, and it can be snoozed 5 times.
2. The snooze function will be turned on automatically when the clock is powered by an adapter or battery.
3. When the alarm is on, pressing any button will stop the alarm, and it will go off again in 5 minutes.
4. Pressing any button twice when the alarm is on can turn off the snooze function.

Important Product Care Information

1. The product is made of MDF wood. Please keep it in a dry environment.
2. If the clock is powered by batteries, please only use high-quality alkaline batteries and set the clock to a sound-activated display. Otherwise, the batteries may run out in a fairly quick time.
3. When the clock is powered by batteries and the display number/numbers is/are constantly flashing, it’s not a fault but indicates that the batteries have run out and need to be replaced as soon as possible.
4. Please do not power the clock by the batteries and mains adapter at the same time, as it may damage the clock.
5. Please do not use any other adapter to power the clock if the output is rated more than 5V / 500mA – 2.0 A, as it will seriously damage the clock.

www.ging-ko.co.uk
All rights are registered and protected.
support@ging-ko.co.uk
Printed in China