WC SUPPORT FRAME
PRODUCT CODES:
WCF80X45R
WCF98X45R
BR_WCF98X45R
BR_WCF80X45R
BEFORE YOU START
IMPORTANT INFORMATION BEFORE YOU START
Please read carefully and keep this information for reference. Thank you for buying a Bathroom Brands Product.
To ensure that it works to its full potential, it needs to be fitted correctly. Check the contents of the pack carefully before installation.
Bathroom Brands will not be held responsible for any re-fit costs where faulty product has been installed. If any fault is found with materials or workmanship, it must be reported immediately to the manufacturer. Remedial action will be taken based on information received, on condition that:
- Full details are supplied to the manufacturer.
- The product has not been modified or tampered with.
- The manufacturer is informed of any damage/shortages prior to installation.
- The product has not been installed, or attempts have been made to install.
We do not accept responsibility for any problems that may occur through incorrect installation. This product should only be installed by a suitably qualified plumber/installer.
Should the installation be completed by a non-qualified person any product guarantee maybe considered invalid.
General dimension and water supply drawing
General dimension and water supply drawing.
Water supply from side (water supply should be connected to angle valve inside cistern)
General dimension and water supply drawing.
Water supply from side (water supply should be connected to angle valve inside cistern)
INSTALLATION
Drill the holes and insert the expansion bolt .
Note: Above are theoretical dimensions of the frame, please follow the practical location of frame.
Installation of draining siphon
Adjust metal frame in proper position in vertical and horizonal direction, then fix socket head screw and floor fixing sets, install water supply pipe
Adjust metal frame in proper position in vertical and horizonal direction, then fix socket head screw and floor fixing sets, install water supply pipe.
Mounting of installation accessories for front push actuator (slight differences for two sizes actuators).
Screw cistern cover and installation box holder to the cistern, and then install cistern cover board and installation box on the installation box holder.
Mounting of installation accessories for top push actuator (slight differences for two sizes actuators).
Screw cistern cover and installation box holder to the cistern, and then install cistern cover board and installation box on the installation box holder.
Seal cistern with panel to avoid dust going into cistern (panel offered by customers)
Compatible with following flush plates:
VENFLUSHC/ VENFLUSHB/ VENFLUSHF/ /VENFLUSHV /VENFLUSHT /VENFLUSHBZ /MPROFLUSHC /MPROFLUSHB /MPROFLUSHF /MPROFLUSHV /MPROFLUSHT /MPROFLUSHBZ /MPROSPLATEC /MPROSPLATEB MPROSPLATEF /MPROSPLATEV /MPROSPLATET /MPROSPLATEBZ/BRVENFLUSHC/BRVENFLUSHB /BRVENFLUSHF /BRVENFLUSHV /BURPLATEC/ BURPLATEG/BURPLATEL.
List of main installation accessories (slight differences for different sizes actuators, please take the actual product for reference)
| NO | Description | Qty | Function |
| 1 | Expansion screw | 4 | Mounting of frame and wall bracket |
| 2 | Wall bracket | 2 | Fixation of frame |
| 3 | Angle valve | 1 | Fill valve inlet and shut-off |
| 4 | Socket head screw | 2 | Mounting of frame and locking into wall bracket |
| 5 | Mounting bracket | 1 | To mount draining syphon |
| 6 | Fixed mount | 1 | |
| 7 | Draining syphon | 1 | To discharge liquid and solid waste from ceramic bowl |
| 8 | Piping stopper | 2 | To reserve space for straight tube and connecting pipe |
| 9 | Connecting pipe | 1 | To joint cistern into ceramic bowl |
| 10 | Straight tube | 1 | (cutting in accordance with wall thickness) |
| 11 | Ceramic bowl fixing accessories | 2 | To mount ceramic bowl |
| 12 | Protective cover | 2 | To protect connecting screw at wall building |
| 13 | Tank lid | 1 | To seal the other window in case of choosing top and front push way so as to avoid dust going into the tank when building the wall |
| 14 | Installation box holder | 1 | To fix installation box |
| 15 | Self-tapping bolt | 8 | To fix plastic holder and cistern cover |
| 16 | Cistern cover | 1 | To reduce water vapor from the cistern |
| 17 | Installation box | 1 | Reserve space for installing push plate and avoid dust or other dirt entering cistern when building wall |
CARE & MAINTENANCE
Do not use cleaning agents containing chlorine, acids or abrasive agents which could damage the surface.
Clean only with a soft cloth using a mild detergent and dry with a micro fibre cloth or similar.
Part of the
Bathroom Brands Group
We reserve the right to make technical modifications without prior notice.
Lake View House Rennie Drive, Dartford
Kent DA1 5FU United Kingdom
0345 873 8840
www.crosswater.co.uk
Documents / Resources
 |
CISTERN and FRAME WCF80X45R 0.82m Wall Hung WC Support Frame [pdf] Installation Guide WCF80X45R, WCF98X45R, WCF80X45R 0.82m Wall Hung WC Support Frame, WCF80X45R, 0.82m Wall Hung WC Support Frame, Wall Hung WC Support Frame, Hung WC Support Frame, WC Support Frame, Support Frame |