Cisco G2Pro Wall Bracket User Manual

• 100×100
• 200×100
• 200×200

Before you begin:

• Read the manufacturer’s VESA mount installation guide.
• Make sure the VESA mount and the wall can support the weight of the Desk Pro G2: 13kg/28.7lb.
• Consider cable routing.
• Consider placement of the power supply.
  

Connector panels

	1×USB-C, 2×USB: Laptop port replicators to connect laptop peripherals, such as keyboard, mouse, USB-camera, flash-drive.
	HDMI Out: External display
	USB: Video-peripherals, such as a headset or document camera
	Ethernet: Network forwarding to laptop
	Ethernet: Network
	HDMI In: For laptop
	USB-C: For laptop, charging (80W)
	Power adapter
	Factory reset pinhole
	Micro-USB: Maintenance port

	Side connector panel for headset and document camera:
	USB-C, charging (15W)
	USB-A, charging (7.5W)

Power supply

Due to the variety of wall constructions, the installer must bring the screws that are required to fix the power supply securely to the wall.

Active stylus

Change battery

Learn more

Visit these websites to learn more about your device:

help.webex.com For Webex registered devices	cisco.com/go/desk-docs For hardware documentation and devices registered to other calling services	cs.co/webexadoption Adoption materials for IT administrators

Customer Support

Cisco Systems Inc.
Corporate Headquarters
170 West Tasman Dr.
San Jose, CA 95134
USA
https://www.cisco.com/go/offices
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Draft v.1 | © 2025 Cisco Systems, Inc. All rights reserved.