QUICK START GUIDE
Cisco Business 110 Series Unmanaged Switches
CBS110 Business 110 Series Unmanaged Switches
Thank you for choosing the Cisco Business 110 Series Switch.
These switches are designed to be operational right out of the box as standard switches.
In the default configuration, it forwards packets between the connected devices after powering up.
What’s in the Box
- Cisco Business 110 Series Switch
- Power Cord or Adapter
- Rack-Mount/Wall-Mount Kit
- Quick Start Guide
- Pointer Card with China RoHS
- Technical Support Contacts
Product Features
- Power LED
- Max PoE LED (for PoE Models)
- LINK/ACT LEDs
- PoE LED (for PoE Models)
- Gigabit Speed LED
- PoE Ports (for PoE Models)
Get Connected
- Plug the power cord of the switch into an outlet.
- Connect devices via ethernet cables.
LED Functions
| LED | GREEN STEADY | GREEN FLASHING | AMBER STEADY | AMBER FLASHING | OFF |
| Power | Device power ON | Device power OFF | |||
| Max PoE (for PoE models) | The switch is providing ≥ 80% of the power budget | The switch is providing < 80% of power budget | |||
| LINK/ACT | Link is detected | Rx/Tx Data | Cable has errors | Loop detected | No link detected |
| PoE (for PoE models) | 802.3af PD is detected | No PD detected | |||
| Gigabit Speed | 1000M link is detected | Non-1000M link detected |
Mounting
For mounting and stacking instructions, please see the Cisco Business 110 Series Unmanaged Switches Mounting Guide
Support
For Cisco support and additional documentation, including mounting instructions and the administration guide, visit cisco.com/go/cbs110
©2020 Cisco and/or its affiliates. All rights reserved. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries.
To view a list of Cisco trademarks, go to this URL: https://www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners.
The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
First, You’ll Need…
- RJ-45 Ethernet cables (Category 5e or higher) for connecting network devices
- Tools for mounting the hardware (optional)
Documents / Resources
 |
CISCO CBS110 Business 110 Series Unmanaged Switches [pdf] User Guide CBS110 Business 110 Series Unmanaged Switches, CBS110, Business 110 Series Unmanaged Switches, Unmanaged Switches, Switches |