Ciro Accessory Perch Mount User Guide

Ciro Accessory Perch Mount

Parts Included

• I Cira Accessory Perch Mount
• I Hardware Kit Including:
• 2 1/11-20 x 1-3/0″
• 2 1/0-20 x Bolts
• 2 x 50mm Bolts
• 2 Spacers

INSTALLATION INSTRUCTION

1. Park on a level surface and shut off the bike. Ensure that the engine has had time to cool before installation. Cover your bank with a clean bowel or blanket to protect it.
2. Remove the two perch bolts with a T27 Torx on the side that you would like your perch to mount. Be careful not to let your controls fall on the tank.
3. Compare the threads of your old bulbs to the bolts supplied in the kit. The shorter 1/4-20’s are commonly used in newer Harley models. Use the M6 for metric bikes. Prepare the perch mount as shown above.
4. Use a 3/15″ Cullen to install the perch mount in the location of the removed box bolts, as shown Go to the right.
5. You may use a 5/32″ allen to loosen the small bolt on top of the mount to adjust the position of the hall.
   • If you have purchased any Ciro accessories to go with your ball mount, please refer to those instructions to complete your installation.

WARNING
This indication alerts you to the fact that ignoring the contents described herein can result in potentially serious injury or death if not followed.

CAUTION
This indication alerts you to the fact that ignoring the contents described herein can or will result in material damage and/or personal injury.

ATTENTION
This indication aires you to the fact if you ignore this deball you will affect the performance or fine- Gionality of the product. All Cira products are designed for “easy assembly” and/or “plugins play”. We recommend a competent mechanic install our products, using standard mechanical procedures to ensure a safe and successful installation.

NOTE
Ciro products are designed and manufactured under very strict quality control. Ciro products are warranted to be free of defects in material and workmanship for one (one) year from the date of purchase by the consumer. Ciro will have no obligation if the customer cannot show proof of purchase. Warranty will not be granted unless the part is properly installed and maintained. Ciro will not be liable for any consequential and incidental damages, including labor, or non-Cire products. Please visit our website Ciro3d.com for our complete warranty policy.

• CIRO3D.COM

Specifications

• Product: CIRO RCCESSDRY PERCH
• Includes:
  • 1 CIRO Accessories Perch Manual
  • Various bolts and spacers
  • N6 x 50mm Bolts

Product Usage Instructions

Pre-Installation

1. Ensure the installation surface is clean and dry. Cover it with a clean towel or blanket to protect it.
2. Remove the two perch balls using a T27 Torx on the side where you want your perch mounted. Be cautious not to let your controls fall on the floor.

Installation

1. Compare the threads of your old balls with the supplied balls. Use the appropriate bolts for newer models.
2. Prepare the perch mount as shown in the manual.
3. Use a 3/8 allen to install the perch mount in the location of the removed bolts.
4. You may use a 5/32 allen to loosen the small ball on top of the mount to adjust the position of the perch.

FAQS

Question: What is the warranty for CIRO products?
Answer: CIRO products are warranted to be free of defects in material and workmanship for 1 year from the date of purchase by the consumer. Warranty is void if parts are improperly installed and maintained.

Question: Are CIRO products easy to assemble?
Answer: All CIRO products are designed for easy assembly and installation. We recommend using common tools and following the provided instructions for a hassle-free setup.

Question: What should I do if I have purchased CIRO accessories along with my bolt mount?
Answer: Please refer to the additional instructions provided with the accessories for completing your installation along with the bolt mount.