CinusLinus B0D6GRPWM1 Laser Level 360 Self Leveling Instructions

Orientation Planes: Up to four – two vertical dual-beam lasers and two dual-beam horizontal lasers, all 360 degrees
Technology: Smart laser technology for enhanced accuracy

Product Usage Instructions

Horizontal and Vertical Line Measurement:
The CinusLinus is designed to accurately determine and check both horizontal and vertical lines. Ensure the device is properly calibrated before use.

Orientation Planes:
This device features up to four orientation planes, including two vertical dual-beam lasers and two dual-beam horizontal lasers, all covering 360 degrees. This allows for comprehensive coverage and efficient completion of tasks.

Smart Laser Technology:
The CinusLinus laser level utilizes smart laser technology to simplify meticulous tasks. Familiarize yourself with the high-tech features to make your work more straightforward and precise.

Frequently Asked Questions (FAQ)

Q: How do I calibrate the CinusLinus laser level?
A: To calibrate the device, follow the instructions provided in the user manual. Typically, calibration involves setting the device on a stable surface and adjusting the laser beams using the built-in controls until they align perfectly.
Q: Can the CinusLinus be used outdoors?
A: The CinusLinus can be used outdoors, but ensure that it is not exposed to extreme weather conditions such as heavy rain or direct sunlight for prolonged periods, as this may affect its accuracy.

Product Overview

Four-Beam Green 360-degree Laser Level

8 line level
360°Surround Beam Orientation 4 horizontail lines and 4 vertical lines.
12 line level
360°Surround Beam Orientation 4 horizontail lines and 8 vertical lines.

16 line level
360°Surround Beam Orientation 8 horizontail lines and 8 vertical lines.

Product Specifications

Laser Class: Class II,<1mW power output

Laser Wavelength: 505-532nm
Laser Type / Color: Green light

Beam Orientation: Vertical, horizontal, 360-degree
Horizontal / Vertical Accuracy: ‡ (1/25″ at 30ft)

Working Distance (Line): Range Up to 30m / 100ft
Pulse Mode Range: 200ft requires receiver)

Remote distance: 10m / 33ft
Self Leveling / Range: +3°

Mounting threads for tripods: 1/4″-20 and 5/8″-11
Power Supply: Rechargeable Li-ion battery

Battery Capacity: 2400mAh (Two Included 4800mAh Total)
Battery Runtime: Supply 4-8h power(Upon the lines opened)

Recharge Time: 3hours recharge
IP Rating: IP54 dust-proof & waterproof
Operation Temperature Range: -10°C ~ +40°C

What’s in the box

All Professional Features

Class-2 Laser is Bright and Long-ranging
16 LINES 4 x 360°Beam Orientation Options
Auto-Leveling +Ingenious Manual Tilt Function
ALL-in-One Versatile Flexible Mounting Options
Multiple Add-ons Enables Smooth Workflow
Provide 2 Flexible Battery Sources to Extend Run Time
Rugged Exterior Build Overmolded Housing
Integrated 360° Mounting Bracket for Tripods
Laser Class: Class II, <1mW power output

Versatile Operating Modes

Auto Self-leveling Mode
- To switch on the measuring tool, slide Lock Switch to “ON ” position.
- Immediately after switching on, the measuring tool could easily switch line and sends out 2 horizontal beam and 2 vertical beams with automatic leveling range of +3°.
- To turn off the measuring tool, slide lock switch to “OFF ” position.

Manual Mode / Tilt Line Mode
- To switch on the measuring tool, slide Lock Switch to ” ON” position.
- Long Press the “” key (Equivalent to ” Out ” Key in Remote Control) to open the Manual / Tilt Mode.
- When the line laser is in Manual/Tilt Mode, long press the “” key (Equivalent to ” Out * Key in Remote Control) enables to switch to the Self Leveling Mode.
- To turn off the measuring tool, slide Lock Switch to “OFF ” position.
- In manual mode, the measuring tool won’t be self-leveling. It could be held by hand or placed on an inclined surface to project a rigid laser beam in any orientation.

Pulse Mode / Outdoor Mode
- To switch on the measuring tool, slide Lock Switch to ” ON” position.
- Short Press the “” key Equivalent to “Out” Key in Remote Control) to open the Outdoor Pulse Mode.
- When the line laser is in Outdoor Pulse Mode, short press the “” key (Equivalent to ” Out” Key in Remote Control) enables to switch to the Normal Working Mode.
- To turn off the measuring tool, slide Lock Switch to “OFF ” position.
- When you open pulse mode, you can use a laser receiver to carry out leveling at long distances or when the laser beams are not visible. The Laser Receiver did not come with our package. So you have to source it separately if you need to use the Outdoor Pulse Mode. It is up to you.

Intended Use

The measuring tool is intended for determining and checking horizontal and vertical lines.
The CinusLinus models with up to four orientation planes: two vertical dual-beam lasers and two dual-beam horizontal, and all of these planes are 360 degrees. This made the job easier and quicker to complete.

To add to it, the CinusLinus laser level uses smart laser technology, which promises to make your meticulous tasks more straightforward with its high-tech features.

Initial Operation

Do not subject the measuring tool to extreme temperatures or variations in temperature. In case of large variations in temperature, allow the measuring tool to adjust to ambient temperature before putting it into operation.
Avoid heavy impact to or falling down of the measuring tool.

Switch the measuring tool off during transport.

Please Pay Attention to the Safety Notes

Working safely with the measuring tool is possible when the operating and safety information are read completely and the instructions contained therein are strictly followed.
While the product is in operation, be careful not to expose your eyes to the emitting laser beam. Exposure to the beam of a Class 2 laser is considered safe for a maximum of 0.25 seconds. Eyelid reflexes will normally provide adequate protection.

Do not stare directly into the beam or view directly with optical instruments or set up the laser at eye level.
Do not allow children to use the laser measuring tool without supervision. They could unintentionally blind other people or themselves
Do not operate the measuring tool in an explosive environment, such as in the presence of flammable liquids, gases, or dust.

The product shall be placed in a ventilated, dry, heat-insulated and reproof warehouse, and it is strictly forbidden to contact with corrosive articles.
The loading, unloading and use of the products are suitable for handling care and shall not be thrown or dropped.
Do not make any modifications to the laser equipment.

Daily Maintenance & Precautions

Routine maintenance
- Please store the machine in dry, ventilated, constant temperature andust-free place.
- Please wipe the shell glass frequently to ensure light transmission.
- When not in use for a long time, please release the locking switch regularly for half an hour. to ensure that the bearing swings flexibly.
- Please pay attention to lock the locking switch after use.
- Do not leave the battery in the machine to avoid the leakage of battery liquid.
- Do not look directly at the laser line. Use with protective glasses.
- Do not wipe the instrument with organic solvent.
Matters needing attention
- Nonprofessionals, please do not disassemble the machine.
- Please avoid violent vibration, collision and falling of the machine.

Troubleshooting

After the receiving switch is turned on, the bubble backlight will flash, Which is a normal signal indicating that the receiver is in the receiving stat.

The laser line flickers to prove that the machine is not in the safe and level range. Please adjust the level through the outrigger.
If the laser line is blurred, please wipe the shell glass with clean cotton cloth.

The company’s product appearance, and internal technical improvement without notice. The company reserves the right to modify the specification parameters and the right to final interpretation.

One-Year NO-Cost Warranty

We are confident in our products and offer excellent and professional service to our customers. This statement is in addition to your effective rights and does not injure your statutory rights.

The following conditions are not covered during the warranty period

Man-made damage caused by improper use

Any product that has been remodeled and repaired by itself
The product is damaged after being sold due to improper transportation
Replacement of easily worn parts

Damage caused by failure to use our original accessories as required
Any natural wear and tear

Questions or Concerns?
We have warranty time for your purchased laser level, so please do not worry about it.
E-mail: support@cinuslinus.com
Contact with Customer Support Team and Remember attach your order ID.

Documents / Resources

CinusLinus B0D6GRPWM1 Laser Level 360 Self Leveling [pdf] Instructions
B0D6GRPWM1 Laser Level 360 Self Leveling, B0D6GRPWM1, Laser Level 360 Self Leveling, Level 360 Self Leveling, Self Leveling, Leveling

References

User Manual

CinusLinus B0D6GRPWM1 Laser Level 360 Self Leveling

Product Information