CS-115C High Performance Sunlight Readable Panel PC

Specifications:

  • Product Name: Sunlight Readable Panel PC CS-100/P1201
    Series
  • Version: V1.11
  • Trademark: Cincoze

Product Information:

The Sunlight Readable Panel PC CS-100/P1201 Series is a
high-quality panel PC designed for use in various environments. It
features a robust design and advanced technology to meet the needs
of industrial applications.

Product Usage Instructions:

System Setup:

  1. Ensure the panel PC is placed in a well-ventilated area away
    from direct sunlight.
  2. Connect the necessary cables and peripherals to the panel
    PC.
  3. Power on the panel PC by pressing the power button.
  4. Follow the on-screen instructions to complete the initial setup
    process.

FAQ:

Q: How do I request warranty service?

To request warranty service, follow these steps:

  1. Fill in the Cincoze RMA Request Form.
  2. Obtain an RMA number from Cincoze.
  3. Provide detailed information about the issues encountered.
  4. Send the defective product along with the RMA number for
    service.

Q: What should I do if my product is out of warranty?

If your product is out of warranty, charges may apply for
repairs. Cincoze will provide a list of charges and wait for your
approval before proceeding with the repair.

“`

Sunlight Readable Panel PC

CS-100/P1201 Series
User Manual
Power Efficient Sunlight Readable Panel PC 8.4″~24″ TFT-LCD Sunlight Readable and Modular Panel PC with Intel® Elkhart Lake Atom® x6000E Series Processor
Version: V1.11

Contents

Preface …………………………………………………………………………………………………………………………………5 Revision …………………………………………………………………………………………………………………………5 Copyright Notice …………………………………………………………………………………………………………….5 Acknowledgement ………………………………………………………………………………………………………….5 Disclaimer ……………………………………………………………………………………………………………………… 5 Declaration of Conformity………………………………………………………………………………………………..6 Product Warranty Statement ……………………………………………………………………………………………6 Technical Support and Assistance ……………………………………………………………………………………..7 Conventions Used in this Manual ……………………………………………………………………………………..8 Safety Precautions…………………………………………………………………………………………………………..8 Package Contents ………………………………………………………………………………………………………….10 Ordering Information …………………………………………………………………………………………………….10
Chapter 1 Product Introductions ……………………………………………………………………………………………12 1.1 Overview ………………………………………………………………………………………………………………..13 1.2 Highlights………………………………………………………………………………………………………………..13 1.3 Key Features……………………………………………………………………………………………………………14 1.4 Hardware Specification …………………………………………………………………………………………….15 1.4.1 CS-108C/P1201 Series…………………………………………………………………………………….15 1.4.2 CS-110HC/P1201 Series ………………………………………………………………………………….19 1.4.3 CS-112HC/P1201 Series ………………………………………………………………………………….23 1.4.4 CS-115C/P1201 Series…………………………………………………………………………………….27 1.4.5 CS-117C/P1201 Series…………………………………………………………………………………….31 1.4.6 CS-119C/P1201 Series…………………………………………………………………………………….35 1.4.7 CS-W121C/P1201 Series …………………………………………………………………………………39 1.4.8 CS-W124C/P1201 Series …………………………………………………………………………………43 1.5 System I/O………………………………………………………………………………………………………………47 1.5.1 Front…………………………………………………………………………………………………………….47 1.5.2 Rear ……………………………………………………………………………………………………………..47 1.5.3 Right …………………………………………………………………………………………………………….48 1.5.4 Left ………………………………………………………………………………………………………………48 1.5.5 Top……………………………………………………………………………………………………………….49
Chapter 2 Switches & Connectors…………………………………………………………………………………………..50 2.1 Location of Switches and Connectors …………………………………………………………………………51 2.1.1 Top View……………………………………………………………………………………………………….51 2.1.2 Bottom View …………………………………………………………………………………………………52 2.2 Switches and Connectors Definition …………………………………………………………………………..53 2.3 Definition of Switches ………………………………………………………………………………………………54 2.4 Definition of Connectors …………………………………………………………………………………………..56
Chapter 3 System Setup ………………………………………………………………………………………………………..60

CS-100/P1201 Series | User Manual

2

3.1 Removing Top Cover…………………………………………………………………………………………………61 3.2 Installing SO-DIMM Memory …………………………………………………………………………………….62 3.3 Installing Mini-PCIe Card …………………………………………………………………………………………..63 3.4 Installing M.2 E Key Card…………………………………………………………………………………………..64 3.5 Installing Antenna(s) ………………………………………………………………………………………………..65 3.6 Installing CPU Thermal Pad ……………………………………………………………………………………….67 3.7 Installing Top Cover ………………………………………………………………………………………………….68 3.8 Installing SIM Card …………………………………………………………………………………………………..69 3.9 Disassembling Display Module ………………………………………………………………………………….70 3.10 Installing SATA Hard Drive ……………………………………………………………………………………….71 3.11 Installing Panel Mount ……………………………………………………………………………………………73 Chapter 4 BIOS Setup……………………………………………………………………………………………………………77 4.1 BIOS Introduction…………………………………………………………………………………………………….78 4.2 Main Setup ……………………………………………………………………………………………………………..79 4.3 Advanced Setup ………………………………………………………………………………………………………80
4.3.1 CPU Configuration………………………………………………………………………………………….80 4.3.2 SATA Configuration…………………………………………………………………………………………81 4.3.3 PCH-FW Configuration ……………………………………………………………………………………81 4.3.4 Trusted Computing Settings…………………………………………………………………………….82 4.3.5 ACPI Settings …………………………………………………………………………………………………83 4.3.6 F81966 Super IO Configuration………………………………………………………………………..83 4.3.7 Hardware Monitor …………………………………………………………………………………………85 4.3.8 S5 RTC Wake Settings ……………………………………………………………………………………..85 4.3.9 Serial Port Console Redirection………………………………………………………………………..86 4.3.10 USB Configuration ………………………………………………………………………………………..86 4.3.11 Network Stack Configuration …………………………………………………………………………87 4.4 Chipset Setup ………………………………………………………………………………………………………….88 4.4.1 System Agent (SA) Configuration ……………………………………………………………………..88 4.4.2 PCH-IO Configuration ……………………………………………………………………………………..89 4.5 Security Setup …………………………………………………………………………………………………………91 4.6 Boot Setup………………………………………………………………………………………………………………92 4.7 Save & Exit………………………………………………………………………………………………………………93 Chapter 5 Product Application……………………………………………………………………………………………….94 5.1 Digital I/O (DIO) application ………………………………………………………………………………………95 5.1.1 Digital I/O Programming Guide………………………………………………………………………..95 5.2 Digital I/O (DIO) Hardware Specification …………………………………………………………………..102 5.2.1 DIO Connector Definition………………………………………………………………………………102 Chapter 6 Optional Modules and Accessories ………………………………………………………………………..104 6.1 Pin Definition & Settings …………………………………………………………………………………………105 6.1.1 CFM-IGN101………………………………………………………………………………………………..105 6.2 Installing CFM Modules…………………………………………………………………………………………..106

CS-100/P1201 Series | User Manual

3

6.2.1 CFM-IGN101………………………………………………………………………………………………..106 6.2.2 CFM-PoE02………………………………………………………………………………………………….107 6.3 Installing Accessories ……………………………………………………………………………………………..109 6.3.1 VESA Mounting ……………………………………………………………………………………………109 6.3.2 URM01 ……………………………………………………………………………………………………….110

CS-100/P1201 Series | User Manual

4

Preface
Revision
Revision 1.00 1.01 1.02 1.10 1.11

Description First Release Correction Made Correction Made PCB updated to version 1.1 (SW2 moved to PCB top side) CS-110HC Product Info Updated

Date 2023/03/31 2023/05/04 2024/04/09 2024/10/09 2024/10/30

Copyright Notice
© 2023 by Cincoze Co., Ltd. All rights are reserved. No parts of this manual may be copied, modified, or reproduced in any form or by any means for commercial use without the prior written permission of Cincoze Co., Ltd. All information and specification provided in this manual are for reference only and remain subject to change without prior notice.
Acknowledgement
Cincoze is a registered trademark of Cincoze Co., Ltd. All registered trademarks and product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective owners.
Disclaimer
This manual is intended to be used as a practical and informative guide only and is subject to change without notice. It does not represent a commitment on the part of Cincoze. This product might include unintentional technical or typographical errors. Changes are periodically made to the information herein to correct such errors, and these changes are incorporated into new editions of the publication.

CS-100/P1201 Series | User Manual

5

Declaration of Conformity
FCC This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
CE The product(s) described in this manual complies with all application European Union (CE) directives if it has a CE marking. For computer systems to remain CE compliant, only CE-compliant parts may be used. Maintaining CE compliance also requires proper cable and cabling techniques.
Product Warranty Statement
Warranty Cincoze products are warranted by Cincoze Co., Ltd. to be free from defect in materials and workmanship for 2 years from the date of purchase by the original purchaser. During the warranty period, we shall, at our option, either repair or replace any product that proves to be defective under normal operation. Defects, malfunctions, or failures of the warranted product caused by damage resulting from natural disasters (such as by lightening, flood, earthquake, etc.), environmental and atmospheric disturbances, other external forces such as power line disturbances, plugging the board in under power, or incorrect cabling, and damage caused by misuse, abuse, and unauthorized alteration or repair, and the product in question is either software, or an expendable item (such as a fuse, battery, etc.), are not warranted.

RMA Before sending your product in, you will need to fill in Cincoze RMA Request Form and obtain an RMA number from us. Our staff is available at any time to provide you with the most friendly and immediate service. RMA Instruction
Customers must fill in Cincoze Return Merchandise Authorization (RMA) Request Form and obtain an RMA number prior to returning a defective product to Cincoze for service.
Customers must collect all the information about the problems encountered and note anything abnormal and describe the problems on the “Cincoze Service Form” for the RMA number apply process.

CS-100/P1201 Series | User Manual

6

Charges may be incurred for certain repairs. Cincoze will charge for repairs to products whose warranty period has expired. Cincoze will also charge for repairs to products if the damage resulted from acts of God, environmental or atmospheric disturbances, or other external forces through misuse, abuse, or unauthorized alteration or repair. If charges will be incurred for a repair, Cincoze lists all charges, and will wait for customer’s approval before performing the repair.
Customers agree to ensure the product or assume the risk of loss or damage during transit, to prepay shipping charges, and to use the original shipping container or equivalent.
Customers can be sent back the faulty products with or without accessories (manuals, cable, etc.) and any components from the system. If the components were suspected as part of the problems, please note clearly which components are included. Otherwise, Cincoze is not responsible for the devices/parts.
Repaired items will be shipped along with a “Repair Report” detailing the findings and actions taken.
Limitation of Liability Cincoze’ liability arising out of the manufacture, sale, or supplying of the product and its use, whether based on warranty, contract, negligence, product liability, or otherwise, shall not exceed the original selling price of the product. The remedies provided herein are the customer’s sole and exclusive remedies. In no event shall Cincoze be liable for direct, indirect, special or consequential damages whether based on contract of any other legal theory.
Technical Support and Assistance
1. Visit the Cincoze website at www.cincoze.com where you can find the latest information about the product.
2. Contact your distributor or our technical support team or sales representative for technical support if you need additional assistance. Please have following information ready before you call: Product name and serial number Description of your peripheral attachments Description of your software (operating system, version, application software, etc.) A complete description of the problem The exact wording of any error messages

CS-100/P1201 Series | User Manual

7

WARNING (AVERTIR)

Conventions Used in this Manual
This indication alerts operators to an operation that, if not strictly observed, may result in severe injury. (Cette indication avertit les opérateurs d’une opération qui, si elle n’est pas strictement observée, peut entraîner des blessures graves.)
This indication alerts operators to an operation that, if not strictly observed, may result in safety hazards to personnel or damage to equipment. (Cette indication avertit les opérateurs d’une opération qui, si elle n’est pas strictement observée, peut entraîner des risques pour la sécurité du personnel ou des dommages à l’équipement.)
This indication provides additional information to complete a task easily. (Cette indication fournit des informations supplémentaires pour effectuer facilement une tâche.)

CAUTION (ATTENTION)

NOTE (NOTE)

Safety Precautions

Before installing and using this device, please note the following precautions. 1. Read these safety instructions carefully. 2. Keep this User’s Manual for future reference. 3. Disconnected this equipment from any AC outlet before cleaning. 4. For plug-in equipment, the power outlet socket must be located near the equipment and must
be easily accessible. 5. Keep this equipment away from humidity. 6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall may
cause damage. 7. Make sure the voltage of the power source is correct before connecting the equipment to the
power outlet. 8. Use a power cord that has been approved for using with the product and that it matches the
voltage and current marked on the product’s electrical range label. The voltage and current rating of the cord must be greater than the voltage and current rating marked on the product. 9. Position the power cord so that people cannot step on it. Do not place anything over the power cord. 10. All cautions and warnings on the equipment should be noted. 11. If the equipment is not used for a long time, disconnect it from the power source to avoid damage by transient overvoltage. 12. Never pour any liquid into an opening. This may cause fire or electrical shock.

CS-100/P1201 Series | User Manual

8

13. Never open the equipment. For safety reasons, the equipment should be opened only by qualified service personnel. If one of the following situations arises, get the equipment checked by service personnel: The power cord or plug is damaged. Liquid has penetrated into the equipment. The equipment has been exposed to moisture. The equipment does not work well, or you cannot get it work according to the user’s manual. The equipment has been dropped and damaged. The equipment has obvious signs of breakage.
14. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
15. Equipment intended only for use in a RESTRICTED ACCESS AREA. 16. Ensure to connect the power cord of power adapter to a socket-outlet with earthing
connection. 17. Dispose of used battery promptly. Keep away from children. Do not disassemble and do not
dispose of in fire.

CS-100/P1201 Series | User Manual

9

Package Contents
Before installation, please ensure all the items listed in the following table are included in the package.

Item Description

Q’ty

1 CS-100/P1201 Series Panel PC

1

2 Thermal Pad (for CPU Thermal Block)

1

3 DIO Terminal Block Connector (Female)

1

4

Panel Mounting Kit (The quantity varies with the size of the display module, please refer to the datasheet for the actual quantity)

1

5 Power Terminal Block Connector (Female)

1

6 Screw Pack

1

7 Remote Power On/Off Terminal Block Connector

1

Note: Notify your sales representative if any of the above items are missing or damaged.

Ordering Information
Model No. CS-108C /P1201-X6425E CS-108C /P1201-X6211E CS-110HC /P1201-X6425E CS-110HC /P1201-X6211E CS-112HC /P1201-X6425E CS-112HC /P1201-X6211E CS-115C /P1201-X6425E CS-115C /P1201-X6211E

Product Description 8.4″ TFT-LCD 1600nits Sunlight Readable Touch Panel PC with Intel Atom x6425E Quad Core Processor
8.4″ TFT-LCD 1600nits Sunlight Readable Touch Panel PC with Intel Atom x6211E Dual Core Processor
10.4″ TFT-LCD 1500nits Sunlight Readable Touch Panel PC with Intel Atom x6425E Quad Core Processor
10.4″ TFT-LCD 1500nits Sunlight Readable Touch Panel PC with Intel Atom x6211E Dual Core Processor
12.1″ TFT-LCD 1500nits Sunlight Readable Touch Panel PC with Intel Atom x6425E Quad Core Processor
12.1″ TFT-LCD 1500nits Sunlight Readable Touch Panel PC with Intel Atom x6211E Dual Core Processor
15″ TFT-LCD 1800nits Sunlight Readable Touch Panel PC with Intel Atom x6425E Quad Core Processor
15″ TFT-LCD 1800nits Sunlight Readable Touch Panel PC with Intel Atom x6211E Dual Core Processor

CS-100/P1201 Series | User Manual

10

CS-117C /P1201-X6425E CS-117C /P1201-X6211E CS-119C /P1201-X6425E CS-119C /P1201-X6211E CS-W121C /P1201-X6425E CS-W121C /P1201-X6211E CS-W124C /P1201-X6425E CS-W124C /P1201-X6211E

17″ TFT-LCD 1500nits Sunlight Readable Touch Panel PC with Intel Atom x6425E Quad Core Processor
17″ TFT-LCD 1500nits Sunlight Readable Touch Panel PC with Intel Atom x6211E Dual Core Processor
19″ TFT-LCD 1600nits Sunlight Readable Touch Panel PC with Intel Atom x6425E Quad Core Processor
19″ TFT-LCD 1600nits Sunlight Readable Touch Panel PC with Intel Atom x6211E Dual Core Processor
21.5″ TFT-LCD 1000nits Sunlight Readable Touch Panel PC with Intel Atom x6425E Quad Core Processor
21.5″ TFT-LCD 1000nits Sunlight Readable Touch Panel PC with Intel Atom x6211E Dual Core Processor
24″ TFT-LCD 1500nits Sunlight Readable Touch Panel PC with Intel Atom x6425E Quad Core Processor
24″ TFT-LCD 1500nits Sunlight Readable Touch Panel PC with Intel Atom x6211E Dual Core Processor

CS-100/P1201 Series | User Manual

11

Chapter 1 Product Introductions

CS-100/P1201 Series | User Manual

12

1.1 Overview
The CS-100/P1201 is a sunlight-readable panel PC with an Intel® Atom® (Elkhart Lake) processor and a maximum screen brightness of 1,600 nits. Available in a selection of screen sizes, aspect ratios, and brightnesses, the CS-100/P1201 has flexible expansion options, including rich native I/O interfaces (GbE LAN, USB 3.2, COM, and DIO), Mini PCIe and M.2 Key E Type 2230 expansion slots, and exclusive CFM expansion to add functions such as PoE and IGN. Cincoze’s exclusive patented Convertible Display System (CDS) technology enables further flexible future computer performance upgrades and screen replacements. The robust CS-100/P1201 series is well-suited for outdoor kiosks or HMI applications.
1.2 Highlights

CS-100/P1201 Series | User Manual

13

1.3 Key Features
8.4″~24″ TFT-LCD Full HD with Ultra High Brightness up to 1,800 nits Intel® Elkhart Lake Atom® x6425E/x6211E Processor 1x DDR4 SO-DIMM Designed with Rugged Aluminum Die-casting Front Bezel Support Panel / VESA / Rack Mount Front Panel IP65 Compliant Wide Operating Temperature Cincoze Patent CDS Technology Support

CS-100/P1201 Series | User Manual

14

1.4 Hardware Specification

1.4.1 CS-108C/P1201 Series

Model Name Display LCD Size Max. Resolution Brightness (cd/m2) Contrast Ratio LCD Color Pixel Pitch Viewing Angle Backlight MTBF Touchscreen Touchscreen Type Physical Dimension (WxDxH) Weight Construction Environment Front Panel Protection Operating Temperature Storage Temperature Relative Humidity Safety

CS-108C
· 8.4″ (4:3) · 800 x 600 · 1600 · 600 : 1 · 16.2M · 0.213 (H) x 0.213 (V) · 160 (H) / 140 (V) · 50,000 hrs(LED Backlight)
· Projected Capacitive Touch
· 262 x 186.2 x 56.2mm · 1.58kg · Flat Rugged Aluminum Die-casting Bezel
· IP 65 Compliant · Ambient with Air flow: -20°C to 70°C (extended temperature peripherals) · -20°C to 70°C · 85% RH @ 40°C (non-condensing) · UL, cUL, CB, IEC, EN 62368-1

Model Name

P1201

System

Processor Memory BIOS

· Intel® Atom® x6425E Processor (1.5M Cache, up to 3.00 GHz, 12W) · Intel® Atom® x6211E Processor (1.5M Cache, up to 3.00 GHz, 6W) · 1x DDR4 SO-DIMM Socket · Supports DDR4 3200MHz Memory Up to 32GB (un-buffered and non-ECC) · AMI BIOS

Graphics

Graphics Engine

· Integrated Intel® UHD Graphics

Maximum Display Output

· Supports Triple Independent Display

CDS

· 1x CDS Connector (1920 x 1080 @ 60Hz)

DP

· 1x DisplayPort Connector (4096 x 2304 @ 60Hz, According to CPU Specifications)

CS-100/P1201 Series | User Manual

15

* Verified maximum resolution: 3840×2160 @ 60Hz

VGA

· 1x VGA Connector (1920 x 1200 @60Hz)

Audio

Audio Codec Line-out Mic-in

· Realtek® ALC888, High Definition Audio · 1x Line-out, Phone Jack 3.5mm · 1x Mic-in, Phone Jack 3.5mm

I/O

LAN
COM USB DIO

· 2x GbE LAN, RJ45 – GbE1: Intel® I210 – GbE2: Intel® I210
· 3x RS-232/422/485 with Auto Flow Control (Support 5V/12V), DB9 · 3x 10Gbps USB 3.2 Gen2, Type A · 1x 480Mbps USB 2.0, Type A · 8x Isolated DIO (4x DI/4x DO), 10-Pin Terminal Block

Storage

SSD/HDD mSATA

· 1x 2.5″ Front Accessible SATA HDD/SSD Drive Bay (SATA 3.0) · 1x mSATA Socket (SATA 3.0, shared by Mini-PCIe socket)

Expansion

Mini PCI Express

· 1x Full-size Mini-PCIe Socket

SIM Socket

· 1x SIM Socket

M.2

· 1x M.2 Key E 2230 Socket, Support Wireless Module

CFM (Control Function Module) · 1x CFM IGN Interface for optional CFM-IGN Module Expansion

Interface

· 1x CFM PoE Interface for optional CFM-PoE Module Expansion

CDS (Convertible Display System) Interface

· 1x CDS Interface for Convertible Display Module

Other Function

Clear CMOS Switch

· 1x Clear CMOS Switch

Reset Button

· 1x Reset Button

Instant Reboot

· Support 0.2sec Instant Reboot Technology

Watchdog Timer

· Software Programmable Supports 256 Levels System Reset

OSD Button

· LCD On/Off, Brightness Up, Brightness Down

Internal Speaker

· AMP 2W + 2W

Status LED Indicator

· Power LED, HDD LED, Temperature LED

Power

Power Button

· 1x ATX Power On/Off Button

Power Mode Switch

· 1x AT/ATX Mode Switch

Power Input

· 9-48VDC, 3-pin Terminal Block

Remote Power On/Off

· 1x Remote Power On/Off, 2-pin Terminal Block

Remote Power LED

· 1x Remote Power LED, 2-pin Terminal Block

CS-100/P1201 Series | User Manual

16

Operating System

Windows

· Windows® 10

Linux

· Supports by project

Physical

Dimension (W x D x H)

· 204.5 x 149 x 41.5 mm

Weight Information

· 1.54 KG

Mechanical Construction

· Extruded Aluminum with Heavy Duty Metal

Mounting

· Wall/ VESA/ CDS/ DIN Rail

Physical Design

· Fanless Design · Jumper-less Design

Reliability & Protection

Reverse Power Input Protection · Yes

Over Voltage Protection

· Protection Range: 51-58V · Protection Type: shut down operating voltage, re-power on at the present level to recover

Over Current Protection

· 15A

CMOS Battery Backup

· SuperCap Integrated for CMOS Battery Maintenance-free Operation

MTBF

· 283,091 Hours – Database: Telcordia SR-332 Issue3, Method 1, Case 3

Environment

· -40°C to 70°C

Operating Temperature

* PassMark BurnInTest: 100% CPU, 2D/3D Graphics (without thermal throttling) * With extended temperature peripherals; Ambient with air flow

* According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14

Storage Temperature

· -40°C to 85°C

Relative Humidity

· 95%RH @ 70°C (non-Condensing)

Shock

· Operating, 50 Grms (w/ SSD, according to IEC60068-2-27)

Vibration

· Operating, 5 Grms, 5-500 Hz, 3 Axes (w/ SSD, according to IEC60068-2-64) · Operating, 1 Grms, 10-500 Hz, 3 Axes (w/ SSD, according to IEC60068-2-6)

Safety

· UL, cUL, CB, IEC/ EN 62368-1

* Product Specifications and features are for reference only and are subject to change without prior notice. For more information, please refer to the latest product datasheet from Cincoze’s website.

CS-100/P1201 Series | User Manual

17

Dimension
CS-108C/P1201

Unit: mm

CS-100/P1201 Series | User Manual

18

1.4.2 CS-110HC/P1201 Series

Model Name Display LCD Size Max. Resolution Brightness (cd/m2) Contrast Ratio LCD Color Pixel Pitch Viewing Angle Backlight MTBF Touchscreen Touch Type Physical Dimension (WxDxH) Weight Mechanical Construction Environment Front Panel Protection Operating Temperature Storage Temperature Relative Humidity Safety

CS-110HC
· 10.4″ (4:3) · 1024 x 768 · 1500 · 1000 : 1 · 16.2M · 0.206 (H) x 0.206 (V) · 178 (H) / 178 (V) · 70,000 hrs(LED Backlight)
· Projected Capacitive
· 295 x 227.3 x 56.2mm · 2.24kg · Flat Rugged Aluminum Die-casting Bezel
· IP 65 Compliant · Ambient with Air flow: -20°C to 70°C (extended temperature peripherals) · -20°C to 70°C · 80% RH @ 40°C (non-condensing) · UL, cUL, CB, IEC, EN 62368-1

Model Name System Processor
Memory
BIOS Graphics Graphics Engine Maximum Display Output CDS DP VGA

P1201
· Intel® Atom® x6425E Processor (1.5M Cache, up to 3.00 GHz, 12W) · Intel® Atom® x6211E Processor (1.5M Cache, up to 3.00 GHz, 6W) · 1x DDR4 SO-DIMM Socket · Supports DDR4 3200MHz Memory Up to 32GB (un-buffered and non-ECC) · AMI BIOS
· Integrated Intel® UHD Graphics · Supports Triple Independent Display · 1x CDS Connector (1920 x 1080 @ 60Hz) · 1x DisplayPort Connector (4096 x 2304 @ 60Hz, According to CPU Specifications)
* Verified maximum resolution: 3840×2160 @ 60Hz · 1x VGA Connector (1920 x 1200 @60Hz)

CS-100/P1201 Series | User Manual

19

Audio

Audio Codec Line-out Mic-in

· Realtek® ALC888, High Definition Audio · 1x Line-out, Phone Jack 3.5mm · 1x Mic-in, Phone Jack 3.5mm

I/O

LAN
COM USB DIO

· 2x GbE LAN, RJ45 – GbE1: Intel® I210 – GbE2: Intel® I210
· 3x RS-232/422/485 with Auto Flow Control (Support 5V/12V), DB9 · 3x 10Gbps USB 3.2 Gen2, Type A · 1x 480Mbps USB 2.0, Type A · 8x Isolated DIO (4x DI/4x DO), 10-Pin Terminal Block

Storage

SSD/HDD mSATA

· 1x 2.5″ Front Accessible SATA HDD/SSD Drive Bay (SATA 3.0) · 1x mSATA Socket (SATA 3.0, shared by Mini-PCIe socket)

Expansion

Mini PCI Express

· 1x Full-size Mini-PCIe Socket

SIM Socket

· 1x SIM Socket

M.2

· 1x M.2 Key E 2230 Socket, Support Wireless Module

CFM (Control Function Module) · 1x CFM IGN Interface for optional CFM-IGN Module Expansion

Interface

· 1x CFM PoE Interface for optional CFM-PoE Module Expansion

CDS (Convertible Display System) Interface

· 1x CDS Interface for Convertible Display Module

Other Function

Clear CMOS Switch

· 1x Clear CMOS Switch

Reset Button

· 1x Reset Button

Instant Reboot

· Support 0.2sec Instant Reboot Technology

Watchdog Timer

· Software Programmable Supports 256 Levels System Reset

OSD Button

· LCD On/Off, Brightness Up, Brightness Down

Internal Speaker

· AMP 2W + 2W

Status LED Indicator

· Power LED, HDD LED, Temperature LED

Power

Power Button

· 1x ATX Power On/Off Button

Power Mode Switch

· 1x AT/ATX Mode Switch

Power Input

· 9-48VDC, 3-pin Terminal Block

Remote Power On/Off

· 1x Remote Power On/Off, 2-pin Terminal Block

Remote Power LED

· 1x Remote Power LED, 2-pin Terminal Block

Operating System

Windows

· Windows® 10

CS-100/P1201 Series | User Manual

20

Linux

· Supports by project

Physical

Dimension (W x D x H)

· 204.5 x 149 x 41.5 mm

Weight Information

· 1.54 KG

Mechanical Construction

· Extruded Aluminum with Heavy Duty Metal

Mounting

· Wall/ VESA/ CDS/ DIN Rail

Physical Design

· Fanless Design · Jumper-less Design

Reliability & Protection Reverse Power Input Protection · Yes

Over Voltage Protection

· Protection Range: 51-58V · Protection Type: shut down operating voltage, re-power on at the present level to recover

Over Current Protection

· 15A

CMOS Battery Backup

· SuperCap Integrated for CMOS Battery Maintenance-free Operation

MTBF

· 283,091 Hours – Database: Telcordia SR-332 Issue3, Method 1, Case 3

Environment

Operating Temperature

· -40°C to 70°C * PassMark BurnInTest: 100% CPU, 2D/3D Graphics (without thermal throttling) * With extended temperature peripherals; Ambient with air flow * According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14

Storage Temperature

· -40°C to 85°C

Relative Humidity

· 95%RH @ 70°C (non-Condensing)

Shock

· Operating, 50 Grms (w/ SSD, according to IEC60068-2-27)

Vibration

· Operating, 5 Grms, 5-500 Hz, 3 Axes (w/ SSD, according to IEC60068-2-64) · Operating, 1 Grms, 10-500 Hz, 3 Axes (w/ SSD, according to IEC60068-2-6)

Safety

· UL, cUL, CB, IEC/ EN 62368-1

* Product Specifications and features are for reference only and are subject to change without prior notice. For more information, please refer to the latest product datasheet from Cincoze’s website.

CS-100/P1201 Series | User Manual

21

Dimension
CS-110HC/P1201

Unit: mm

CS-100/P1201 Series | User Manual

22

1.4.3 CS-112HC/P1201 Series

Model Name Display LCD Size Max. Resolution Brightness (cd/m2) Contrast Ratio LCD Color Pixel Pitch Viewing Angle Backlight MTBF Touchscreen Touch Type Physical Dimension (WxDxH) Weight Construction Environment Front Panel Protection Operating Temperature Storage Temperature Relative Humidity Safety

CS-112HC
· 12.1″ (4:3) · 1024 x 768 · 1500 · 700 : 1 · 16.7M · 0.24 (H) x 0.24 (V) · 160 / 160 · 30,000 hrs (LED Backlight)
· Projected Capacitive
· 345 x 265.3 x 57 mm · 3.16 kg · Flat Rugged Aluminum Die-casting Bezel
· IP 65 Compliant · Ambient with Air flow: -20°C to 70°C (extended temperature peripherals) · -20°C to 70°C · 80% RH @ 40°C (non-condensing) · UL, cUL, CB, IEC, EN 62368-1

Model Name System Processor
Memory
BIOS Graphics Graphics Engine Maximum Display Output CDS DP VGA

P1201
· Intel® Atom® x6425E Processor (1.5M Cache, up to 3.00 GHz, 12W) · Intel® Atom® x6211E Processor (1.5M Cache, up to 3.00 GHz, 6W) · 1x DDR4 SO-DIMM Socket · Supports DDR4 3200MHz Memory Up to 32GB (un-buffered and non-ECC) · AMI BIOS
· Integrated Intel® UHD Graphics · Supports Triple Independent Display · 1x CDS Connector (1920 x 1080 @ 60Hz) · 1x DisplayPort Connector (4096 x 2304 @ 60Hz, According to CPU Specifications)
* Verified maximum resolution: 3840×2160 @ 60Hz · 1x VGA Connector (1920 x 1200 @60Hz)

CS-100/P1201 Series | User Manual

23

Audio

Audio Codec Line-out Mic-in

· Realtek® ALC888, High Definition Audio · 1x Line-out, Phone Jack 3.5mm · 1x Mic-in, Phone Jack 3.5mm

I/O

LAN
COM USB DIO

· 2x GbE LAN, RJ45 – GbE1: Intel® I210 – GbE2: Intel® I210
· 3x RS-232/422/485 with Auto Flow Control (Support 5V/12V), DB9 · 3x 10Gbps USB 3.2 Gen2, Type A · 1x 480Mbps USB 2.0, Type A · 8x Isolated DIO (4x DI/4x DO), 10-Pin Terminal Block

Storage

SSD/HDD mSATA

· 1x 2.5″ Front Accessible SATA HDD/SSD Drive Bay (SATA 3.0) · 1x mSATA Socket (SATA 3.0, shared by Mini-PCIe socket)

Expansion

Mini PCI Express

· 1x Full-size Mini-PCIe Socket

SIM Socket

· 1x SIM Socket

M.2

· 1x M.2 Key E 2230 Socket, Support Wireless Module

CFM (Control Function Module) · 1x CFM IGN Interface for optional CFM-IGN Module Expansion

Interface

· 1x CFM PoE Interface for optional CFM-PoE Module Expansion

CDS (Convertible Display System) Interface

· 1x CDS Interface for Convertible Display Module

Other Function

Clear CMOS Switch

· 1x Clear CMOS Switch

Reset Button

· 1x Reset Button

Instant Reboot

· Support 0.2sec Instant Reboot Technology

Watchdog Timer

· Software Programmable Supports 256 Levels System Reset

OSD Button

· LCD On/Off, Brightness Up, Brightness Down

Internal Speaker

· AMP 2W + 2W

Status LED Indicator

· Power LED, HDD LED, Temperature LED

Power

Power Button

· 1x ATX Power On/Off Button

Power Mode Switch

· 1x AT/ATX Mode Switch

Power Input

· 9-48VDC, 3-pin Terminal Block

Remote Power On/Off

· 1x Remote Power On/Off, 2-pin Terminal Block

Remote Power LED

· 1x Remote Power LED, 2-pin Terminal Block

Operating System

Windows

· Windows® 10

CS-100/P1201 Series | User Manual

24

Linux

· Supports by project

Physical

Dimension (W x D x H)

· 204.5 x 149 x 41.5 mm

Weight Information

· 1.54 KG

Mechanical Construction

· Extruded Aluminum with Heavy Duty Metal

Mounting

· Wall/ VESA/ CDS/ DIN Rail

Physical Design

· Fanless Design · Jumper-less Design

Reliability & Protection Reverse Power Input Protection · Yes

Over Voltage Protection

· Protection Range: 51-58V · Protection Type: shut down operating voltage, re-power on at the present level to recover

Over Current Protection

· 15A

CMOS Battery Backup

· SuperCap Integrated for CMOS Battery Maintenance-free Operation

MTBF

· 283,091 Hours – Database: Telcordia SR-332 Issue3, Method 1, Case 3

Environment

Operating Temperature

· -40°C to 70°C * PassMark BurnInTest: 100% CPU, 2D/3D Graphics (without thermal throttling) * With extended temperature peripherals; Ambient with air flow * According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14

Storage Temperature

· -40°C to 85°C

Relative Humidity

· 95%RH @ 70°C (non-Condensing)

Shock

· Operating, 50 Grms (w/ SSD, according to IEC60068-2-27)

Vibration

· Operating, 5 Grms, 5-500 Hz, 3 Axes (w/ SSD, according to IEC60068-2-64) · Operating, 1 Grms, 10-500 Hz, 3 Axes (w/ SSD, according to IEC60068-2-6)

Safety

· UL, cUL, CB, IEC/ EN 62368-1

* Product Specifications and features are for reference only and are subject to change without prior notice. For more information, please refer to the latest product datasheet from Cincoze’s website.

CS-100/P1201 Series | User Manual

25

Dimension
CS-112HC/P1201

Unit: mm

CS-100/P1201 Series | User Manual

26

1.4.4 CS-115C/P1201 Series

Model Name Display LCD Size Max. Resolution Brightness (cd/m2) Contrast Ratio LCD Color Pixel Pitch Viewing Angle Backlight MTBF Touchscreen Touchscreen Type Physical Dimension (WxDxH) Weight Construction Environment Front Panel Protection Operating Temperature Storage Temperature Relative Humidity Safety

CS-115C
· 15″ (4:3) · 1024 x 768 · 1800 · 800 : 1 · 16.2M · 0.297 (H) x 0.297(V) · 160 / 150 · 50,000 hrs (LED Backlight)
· Projected Capacitive Touch
· 408 x 312.4 x 59.2 mm · 4.36kg · Flat Rugged Aluminum Die-casting Bezel
· IP 65 Compliant · Ambient with Air flow: -20°C to 70°C (extended temperature peripherals) · -20°C to 70°C · 80% RH @ 40°C (non-condensing) · UL, cUL, CB, IEC, EN 62368-1

Model Name System Processor
Memory
BIOS Graphics Graphics Engine Maximum Display Output CDS DP VGA

P1201
· Intel® Atom® x6425E Processor (1.5M Cache, up to 3.00 GHz, 12W) · Intel® Atom® x6211E Processor (1.5M Cache, up to 3.00 GHz, 6W) · 1x DDR4 SO-DIMM Socket · Supports DDR4 3200MHz Memory Up to 32GB (un-buffered and non-ECC) · AMI BIOS
· Integrated Intel® UHD Graphics · Supports Triple Independent Display · 1x CDS Connector (1920 x 1080 @ 60Hz) · 1x DisplayPort Connector (4096 x 2304 @ 60Hz, According to CPU Specifications)
* Verified maximum resolution: 3840×2160 @ 60Hz · 1x VGA Connector (1920 x 1200 @60Hz)

CS-100/P1201 Series | User Manual

27

Audio

Audio Codec Line-out Mic-in

· Realtek® ALC888, High Definition Audio · 1x Line-out, Phone Jack 3.5mm · 1x Mic-in, Phone Jack 3.5mm

I/O

LAN
COM USB DIO

· 2x GbE LAN, RJ45 – GbE1: Intel® I210 – GbE2: Intel® I210
· 3x RS-232/422/485 with Auto Flow Control (Support 5V/12V), DB9 · 3x 10Gbps USB 3.2 Gen2, Type A · 1x 480Mbps USB 2.0, Type A · 8x Isolated DIO (4x DI/4x DO), 10-Pin Terminal Block

Storage

SSD/HDD mSATA

· 1x 2.5″ Front Accessible SATA HDD/SSD Drive Bay (SATA 3.0) · 1x mSATA Socket (SATA 3.0, shared by Mini-PCIe socket)

Expansion

Mini PCI Express

· 1x Full-size Mini-PCIe Socket

SIM Socket

· 1x SIM Socket

M.2

· 1x M.2 Key E 2230 Socket, Support Wireless Module

CFM (Control Function Module) · 1x CFM IGN Interface for optional CFM-IGN Module Expansion

Interface

· 1x CFM PoE Interface for optional CFM-PoE Module Expansion

CDS (Convertible Display System) Interface

· 1x CDS Interface for Convertible Display Module

Other Function

Clear CMOS Switch

· 1x Clear CMOS Switch

Reset Button

· 1x Reset Button

Instant Reboot

· Support 0.2sec Instant Reboot Technology

Watchdog Timer

· Software Programmable Supports 256 Levels System Reset

OSD Button

· LCD On/Off, Brightness Up, Brightness Down

Internal Speaker

· AMP 2W + 2W

Status LED Indicator

· Power LED, HDD LED, Temperature LED

Power

Power Button

· 1x ATX Power On/Off Button

Power Mode Switch

· 1x AT/ATX Mode Switch

Power Input

· 9-48VDC, 3-pin Terminal Block

Remote Power On/Off

· 1x Remote Power On/Off, 2-pin Terminal Block

Remote Power LED

· 1x Remote Power LED, 2-pin Terminal Block

Operating System

Windows

· Windows® 10

CS-100/P1201 Series | User Manual

28

Linux

· Supports by project

Physical

Dimension (W x D x H)

· 204.5 x 149 x 41.5 mm

Weight Information

· 1.54 KG

Mechanical Construction

· Extruded Aluminum with Heavy Duty Metal

Mounting

· Wall/ VESA/ CDS/ DIN Rail

Physical Design

· Fanless Design · Jumper-less Design

Reliability & Protection Reverse Power Input Protection · Yes

Over Voltage Protection

· Protection Range: 51-58V · Protection Type: shut down operating voltage, re-power on at the present level to recover

Over Current Protection

· 15A

CMOS Battery Backup

· SuperCap Integrated for CMOS Battery Maintenance-free Operation

MTBF

· 283,091 Hours – Database: Telcordia SR-332 Issue3, Method 1, Case 3

Environment

Operating Temperature

· -40°C to 70°C * PassMark BurnInTest: 100% CPU, 2D/3D Graphics (without thermal throttling) * With extended temperature peripherals; Ambient with air flow * According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14

Storage Temperature

· -40°C to 85°C

Relative Humidity

· 95%RH @ 70°C (non-Condensing)

Shock

· Operating, 50 Grms (w/ SSD, according to IEC60068-2-27)

Vibration

· Operating, 5 Grms, 5-500 Hz, 3 Axes (w/ SSD, according to IEC60068-2-64) · Operating, 1 Grms, 10-500 Hz, 3 Axes (w/ SSD, according to IEC60068-2-6)

Safety

· UL, cUL, CB, IEC/ EN 62368-1

* Product Specifications and features are for reference only and are subject to change without prior notice. For more information, please refer to the latest product datasheet from Cincoze’s website.

CS-100/P1201 Series | User Manual

29

Dimension
CS-115C/P1201

Unit: mm

CS-100/P1201 Series | User Manual

30

1.4.5 CS-117C/P1201 Series

Model Name Display LCD Size Max. Resolution Brightness (cd/m2) Contrast Ratio LCD Color Pixel Pitch Viewing Angle Backlight MTBF Touchscreen Touchscreen Type Physical Dimension (WxDxH) Weight Construction Environment Front Panel Protection Operating Temperature Storage Temperature Relative Humidity Safety

CS-117C
· 17″ (5:4) · 1280 x 1024 · 1500 · 800 : 1 · 16.7M · 0.264 (H) x 0.264 (V) · 160 / 140 · 50,000 hrs (LED Backlight)
· Projected Capacitive Touch
· 450 x 350 x 63.2mm · 5.64 kg · Flat Rugged Aluminum Die-casting Bezel
· IP 65 Compliant · Ambient with Air flow: -20°C to 70°C (extended temperature peripherals) · -20°C to 70°C · 80% RH @ 40°C (non-condensing) · UL, cUL, CB, IEC, EN 62368-1

Model Name System Processor
Memory
BIOS Graphics Graphics Engine Maximum Display Output CDS DP VGA

P1201
· Intel® Atom® x6425E Processor (1.5M Cache, up to 3.00 GHz, 12W) · Intel® Atom® x6211E Processor (1.5M Cache, up to 3.00 GHz, 6W) · 1x DDR4 SO-DIMM Socket · Supports DDR4 3200MHz Memory Up to 32GB (un-buffered and non-ECC) · AMI BIOS
· Integrated Intel® UHD Graphics · Supports Triple Independent Display · 1x CDS Connector (1920 x 1080 @ 60Hz) · 1x DisplayPort Connector (4096 x 2304 @ 60Hz, According to CPU Specifications)
* Verified maximum resolution: 3840×2160 @ 60Hz · 1x VGA Connector (1920 x 1200 @60Hz)

CS-100/P1201 Series | User Manual

31

Audio

Audio Codec Line-out Mic-in

· Realtek® ALC888, High Definition Audio · 1x Line-out, Phone Jack 3.5mm · 1x Mic-in, Phone Jack 3.5mm

I/O

LAN
COM USB DIO

· 2x GbE LAN, RJ45 – GbE1: Intel® I210 – GbE2: Intel® I210
· 3x RS-232/422/485 with Auto Flow Control (Support 5V/12V), DB9 · 3x 10Gbps USB 3.2 Gen2, Type A · 1x 480Mbps USB 2.0, Type A · 8x Isolated DIO (4x DI/4x DO), 10-Pin Terminal Block

Storage

SSD/HDD mSATA

· 1x 2.5″ Front Accessible SATA HDD/SSD Drive Bay (SATA 3.0) · 1x mSATA Socket (SATA 3.0, shared by Mini-PCIe socket)

Expansion

Mini PCI Express

· 1x Full-size Mini-PCIe Socket

SIM Socket

· 1x SIM Socket

M.2

· 1x M.2 Key E 2230 Socket, Support Wireless Module

CFM (Control Function Module) · 1x CFM IGN Interface for optional CFM-IGN Module Expansion

Interface

· 1x CFM PoE Interface for optional CFM-PoE Module Expansion

CDS (Convertible Display System) Interface

· 1x CDS Interface for Convertible Display Module

Other Function

Clear CMOS Switch

· 1x Clear CMOS Switch

Reset Button

· 1x Reset Button

Instant Reboot

· Support 0.2sec Instant Reboot Technology

Watchdog Timer

· Software Programmable Supports 256 Levels System Reset

OSD Button

· LCD On/Off, Brightness Up, Brightness Down

Internal Speaker

· AMP 2W + 2W

Status LED Indicator

· Power LED, HDD LED, Temperature LED

Power

Power Button

· 1x ATX Power On/Off Button

Power Mode Switch

· 1x AT/ATX Mode Switch

Power Input

· 9-48VDC, 3-pin Terminal Block

Remote Power On/Off

· 1x Remote Power On/Off, 2-pin Terminal Block

Remote Power LED

· 1x Remote Power LED, 2-pin Terminal Block

Operating System

Windows

· Windows® 10

CS-100/P1201 Series | User Manual

32

Linux

· Supports by project

Physical

Dimension (W x D x H)

· 204.5 x 149 x 41.5 mm

Weight Information

· 1.54 KG

Mechanical Construction

· Extruded Aluminum with Heavy Duty Metal

Mounting

· Wall/ VESA/ CDS/ DIN Rail

Physical Design

· Fanless Design · Jumper-less Design

Reliability & Protection Reverse Power Input Protection · Yes

Over Voltage Protection

· Protection Range: 51-58V · Protection Type: shut down operating voltage, re-power on at the present level to recover

Over Current Protection

· 15A

CMOS Battery Backup

· SuperCap Integrated for CMOS Battery Maintenance-free Operation

MTBF

· 283,091 Hours – Database: Telcordia SR-332 Issue3, Method 1, Case 3

Environment

Operating Temperature

· -40°C to 70°C * PassMark BurnInTest: 100% CPU, 2D/3D Graphics (without thermal throttling) * With extended temperature peripherals; Ambient with air flow * According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14

Storage Temperature

· -40°C to 85°C

Relative Humidity

· 95%RH @ 70°C (non-Condensing)

Shock

· Operating, 50 Grms (w/ SSD, according to IEC60068-2-27)

Vibration

· Operating, 5 Grms, 5-500 Hz, 3 Axes (w/ SSD, according to IEC60068-2-64) · Operating, 1 Grms, 10-500 Hz, 3 Axes (w/ SSD, according to IEC60068-2-6)

Safety

· UL, cUL, CB, IEC/ EN 62368-1

* Product Specifications and features are for reference only and are subject to change without prior notice. For more information, please refer to the latest product datasheet from Cincoze’s website.

CS-100/P1201 Series | User Manual

33

Dimension
CS-117C/P1201

Unit: mm

CS-100/P1201 Series | User Manual

34

1.4.6 CS-119C/P1201 Series

Model Name Display LCD Size Max. Resolution Brightness (cd/m2) Contrast Ratio LCD Color Pixel Pitch Viewing Angle Backlight MTBF Touchscreen Touch Type Physical Dimension (WxDxH) Weight Construction Environment Front Panel Protection Operating Temperature Storage Temperature Relative Humidity Safety

CS-119C
· 19″ (5:4) · 1280 x 1024 · 1600 · 1000 : 1 · 16.7M · 0.294 (H) x 0.294 (V) · 170 / 160 · 50,000 hrs (LED Backlight)
· Projected Capacitive
· 510 x 389.3 x 63.2 mm · 6.96 kg · Flat Rugged Aluminum Die-casting Bezel
· IP 65 Compliant · Ambient with Air flow: -20°C to 70°C (extended temperature peripherals) · -20°C to 70°C · 80% RH @ 40°C (non-condensing) · UL, cUL, CB, IEC, EN 62368-1

Model Name System Processor
Memory
BIOS Graphics Graphics Engine Maximum Display Output CDS DP VGA

P1201
· Intel® Atom® x6425E Processor (1.5M Cache, up to 3.00 GHz, 12W) · Intel® Atom® x6211E Processor (1.5M Cache, up to 3.00 GHz, 6W) · 1x DDR4 SO-DIMM Socket · Supports DDR4 3200MHz Memory Up to 32GB (un-buffered and non-ECC) · AMI BIOS
· Integrated Intel® UHD Graphics · Supports Triple Independent Display · 1x CDS Connector (1920 x 1080 @ 60Hz) · 1x DisplayPort Connector (4096 x 2304 @ 60Hz, According to CPU Specifications)
* Verified maximum resolution: 3840×2160 @ 60Hz · 1x VGA Connector (1920 x 1200 @60Hz)

CS-100/P1201 Series | User Manual

35

Audio

Audio Codec Line-out Mic-in

· Realtek® ALC888, High Definition Audio · 1x Line-out, Phone Jack 3.5mm · 1x Mic-in, Phone Jack 3.5mm

I/O

LAN
COM USB DIO

· 2x GbE LAN, RJ45 – GbE1: Intel® I210 – GbE2: Intel® I210
· 3x RS-232/422/485 with Auto Flow Control (Support 5V/12V), DB9 · 3x 10Gbps USB 3.2 Gen2, Type A · 1x 480Mbps USB 2.0, Type A · 8x Isolated DIO (4x DI/4x DO), 10-Pin Terminal Block

Storage

SSD/HDD mSATA

· 1x 2.5″ Front Accessible SATA HDD/SSD Drive Bay (SATA 3.0) · 1x mSATA Socket (SATA 3.0, shared by Mini-PCIe socket)

Expansion

Mini PCI Express

· 1x Full-size Mini-PCIe Socket

SIM Socket

· 1x SIM Socket

M.2

· 1x M.2 Key E 2230 Socket, Support Wireless Module

CFM (Control Function Module) · 1x CFM IGN Interface for optional CFM-IGN Module Expansion

Interface

· 1x CFM PoE Interface for optional CFM-PoE Module Expansion

CDS (Convertible Display System) Interface

· 1x CDS Interface for Convertible Display Module

Other Function

Clear CMOS Switch

· 1x Clear CMOS Switch

Reset Button

· 1x Reset Button

Instant Reboot

· Support 0.2sec Instant Reboot Technology

Watchdog Timer

· Software Programmable Supports 256 Levels System Reset

OSD Button

· LCD On/Off, Brightness Up, Brightness Down

Internal Speaker

· AMP 2W + 2W

Status LED Indicator

· Power LED, HDD LED, Temperature LED

Power

Power Button

· 1x ATX Power On/Off Button

Power Mode Switch

· 1x AT/ATX Mode Switch

Power Input

· 9-48VDC, 3-pin Terminal Block

Remote Power On/Off

· 1x Remote Power On/Off, 2-pin Terminal Block

Remote Power LED

· 1x Remote Power LED, 2-pin Terminal Block

Operating System

Windows

· Windows® 10

CS-100/P1201 Series | User Manual

36

Linux

· Supports by project

Physical

Dimension (W x D x H)

· 204.5 x 149 x 41.5 mm

Weight Information

· 1.54 KG

Mechanical Construction

· Extruded Aluminum with Heavy Duty Metal

Mounting

· Wall/ VESA/ CDS/ DIN Rail

Physical Design

· Fanless Design · Jumper-less Design

Reliability & Protection Reverse Power Input Protection · Yes

Over Voltage Protection

· Protection Range: 51-58V · Protection Type: shut down operating voltage, re-power on at the present level to recover

Over Current Protection

· 15A

CMOS Battery Backup

· SuperCap Integrated for CMOS Battery Maintenance-free Operation

MTBF

· 283,091 Hours – Database: Telcordia SR-332 Issue3, Method 1, Case 3

Environment

Operating Temperature

· -40°C to 70°C * PassMark BurnInTest: 100% CPU, 2D/3D Graphics (without thermal throttling) * With extended temperature peripherals; Ambient with air flow * According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14

Storage Temperature

· -40°C to 85°C

Relative Humidity

· 95%RH @ 70°C (non-Condensing)

Shock

· Operating, 50 Grms (w/ SSD, according to IEC60068-2-27)

Vibration

· Operating, 5 Grms, 5-500 Hz, 3 Axes (w/ SSD, according to IEC60068-2-64) · Operating, 1 Grms, 10-500 Hz, 3 Axes (w/ SSD, according to IEC60068-2-6)

Safety

· UL, cUL, CB, IEC/ EN 62368-1

* Product Specifications and features are for reference only and are subject to change without prior notice. For more information, please refer to the latest product datasheet from Cincoze’s website.

CS-100/P1201 Series | User Manual

37

Dimension
CS-119C/P1201

Unit: mm

CS-100/P1201 Series | User Manual

38

1.4.7 CS-W121C/P1201 Series

Model Name Display LCD Size Max. Resolution Brightness (cd/m2) Contrast Ratio LCD Color Pixel Pitch Viewing Angle Backlight MTBF Touchscreen Touch Type Physical Dimension (WxDxH) Weight Construction Environment Front Panel Protection Operating Temperature Storage Temperature Relative Humidity Safety

CS-W121C
· 21.5″ (16:9) · 1920×1080 (Full HD) · 1000 · 5000 : 1 · 16.7M · 0.24825 (H) x 0.24825 (V) · 178/178 · 50,000 hrs (LED Backlight)
· Projected Capacitive
· 550 x 330.5 x 63.2mm · 5.56 kg · Flat Rugged Aluminum Die-casting Bezel
· IP 65 Compliant · Ambient with Air flow: 0°C to 70°C (extended temperature peripherals) · -20°C to 70°C · 90% RH @ 39°C (non-condensing) · UL, cUL, CB, IEC, EN 62368-1

Model Name System Processor
Memory
BIOS Graphics Graphics Engine Maximum Display Output CDS DP VGA

P1201
· Intel® Atom® x6425E Processor (1.5M Cache, up to 3.00 GHz, 12W) · Intel® Atom® x6211E Processor (1.5M Cache, up to 3.00 GHz, 6W) · 1x DDR4 SO-DIMM Socket · Supports DDR4 3200MHz Memory Up to 32GB (un-buffered and non-ECC) · AMI BIOS
· Integrated Intel® UHD Graphics · Supports Triple Independent Display · 1x CDS Connector (1920 x 1080 @ 60Hz) · 1x DisplayPort Connector (4096 x 2304 @ 60Hz, According to CPU Specifications)
* Verified maximum resolution: 3840×2160 @ 60Hz · 1x VGA Connector (1920 x 1200 @60Hz)

CS-100/P1201 Series | User Manual

39

Audio

Audio Codec Line-out Mic-in

· Realtek® ALC888, High Definition Audio · 1x Line-out, Phone Jack 3.5mm · 1x Mic-in, Phone Jack 3.5mm

I/O

LAN
COM USB DIO

· 2x GbE LAN, RJ45 – GbE1: Intel® I210 – GbE2: Intel® I210
· 3x RS-232/422/485 with Auto Flow Control (Support 5V/12V), DB9 · 3x 10Gbps USB 3.2 Gen2, Type A · 1x 480Mbps USB 2.0, Type A · 8x Isolated DIO (4x DI/4x DO), 10-Pin Terminal Block

Storage

SSD/HDD mSATA

· 1x 2.5″ Front Accessible SATA HDD/SSD Drive Bay (SATA 3.0) · 1x mSATA Socket (SATA 3.0, shared by Mini-PCIe socket)

Expansion

Mini PCI Express

· 1x Full-size Mini-PCIe Socket

SIM Socket

· 1x SIM Socket

M.2

· 1x M.2 Key E 2230 Socket, Support Wireless Module

CFM (Control Function Module) · 1x CFM IGN Interface for optional CFM-IGN Module Expansion

Interface

· 1x CFM PoE Interface for optional CFM-PoE Module Expansion

CDS (Convertible Display System) Interface

· 1x CDS Interface for Convertible Display Module

Other Function

Clear CMOS Switch

· 1x Clear CMOS Switch

Reset Button

· 1x Reset Button

Instant Reboot

· Support 0.2sec Instant Reboot Technology

Watchdog Timer

· Software Programmable Supports 256 Levels System Reset

OSD Button

· LCD On/Off, Brightness Up, Brightness Down

Internal Speaker

· AMP 2W + 2W

Status LED Indicator

· Power LED, HDD LED, Temperature LED

Power

Power Button

· 1x ATX Power On/Off Button

Power Mode Switch

· 1x AT/ATX Mode Switch

Power Input

· 9-48VDC, 3-pin Terminal Block

Remote Power On/Off

· 1x Remote Power On/Off, 2-pin Terminal Block

Remote Power LED

· 1x Remote Power LED, 2-pin Terminal Block

Operating System

Windows

· Windows® 10

CS-100/P1201 Series | User Manual

40

Linux

· Supports by project

Physical

Dimension (W x D x H)

· 204.5 x 149 x 41.5 mm

Weight Information

· 1.54 KG

Mechanical Construction

· Extruded Aluminum with Heavy Duty Metal

Mounting

· Wall/ VESA/ CDS/ DIN Rail

Physical Design

· Fanless Design · Jumper-less Design

Reliability & Protection Reverse Power Input Protection · Yes

Over Voltage Protection

· Protection Range: 51-58V · Protection Type: shut down operating voltage, re-power on at the present level to recover

Over Current Protection

· 15A

CMOS Battery Backup

· SuperCap Integrated for CMOS Battery Maintenance-free Operation

MTBF

· 283,091 Hours – Database: Telcordia SR-332 Issue3, Method 1, Case 3

Environment

Operating Temperature

· -40°C to 70°C * PassMark BurnInTest: 100% CPU, 2D/3D Graphics (without thermal throttling) * With extended temperature peripherals; Ambient with air flow * According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14

Storage Temperature

· -40°C to 85°C

Relative Humidity

· 95%RH @ 70°C (non-Condensing)

Shock

· Operating, 50 Grms (w/ SSD, according to IEC60068-2-27)

Vibration

· Operating, 5 Grms, 5-500 Hz, 3 Axes (w/ SSD, according to IEC60068-2-64) · Operating, 1 Grms, 10-500 Hz, 3 Axes (w/ SSD, according to IEC60068-2-6)

Safety

· UL, cUL, CB, IEC/ EN 62368-1

* Product Specifications and features are for reference only and are subject to change without prior notice. For more information, please refer to the latest product datasheet from Cincoze’s website.

CS-100/P1201 Series | User Manual

41

Dimension
CS-W121C/P1201

Unit: mm

CS-100/P1201 Series | User Manual

42

1.4.8 CS-W124C/P1201 Series

Model Name Display LCD Size Max. Resolution Brightness (cd/m2) Contrast Ratio LCD Color Pixel Pitch Viewing Angle Backlight MTBF Touchscreen Touch Type Physical Dimension (WxDxH) Weight Construction Environment Front Panel Protection Operating Temperature Storage Temperature Relative Humidity Safety

CS-W124C
· 24″ (16:9) · 1920×1080 · 1500 · 5000 : 1 · 16.7M · 0.27675 (H) x 0.27675 (V) · 178/178 · 50,000 hrs (LED Backlight)
· Projected Capacitive
· 605 x 373 x 63.2 mm · 6.64 kg · Flat Rugged Aluminum Die-casting Bezel
· IP 65 Compliant · Ambient with Air flow: -20°C to 70°C (extended temperature peripherals) · -20°C to 70°C · 80% RH @ 50°C (non-condensing) · UL, cUL, CB, IEC, EN 62368-1

Model Name System Processor
Memory
BIOS Graphics Graphics Engine Maximum Display Output CDS DP VGA

P1201
· Intel® Atom® x6425E Processor (1.5M Cache, up to 3.00 GHz, 12W) · Intel® Atom® x6211E Processor (1.5M Cache, up to 3.00 GHz, 6W) · 1x DDR4 SO-DIMM Socket · Supports DDR4 3200MHz Memory Up to 32GB (un-buffered and non-ECC) · AMI BIOS
· Integrated Intel® UHD Graphics · Supports Triple Independent Display · 1x CDS Connector (1920 x 1080 @ 60Hz) · 1x DisplayPort Connector (4096 x 2304 @ 60Hz, According to CPU Specifications)
* Verified maximum resolution: 3840×2160 @ 60Hz · 1x VGA Connector (1920 x 1200 @60Hz)

CS-100/P1201 Series | User Manual

43

Audio

Audio Codec Line-out Mic-in

· Realtek® ALC888, High Definition Audio · 1x Line-out, Phone Jack 3.5mm · 1x Mic-in, Phone Jack 3.5mm

I/O

LAN
COM USB DIO

· 2x GbE LAN, RJ45 – GbE1: Intel® I210 – GbE2: Intel® I210
· 3x RS-232/422/485 with Auto Flow Control (Support 5V/12V), DB9 · 3x 10Gbps USB 3.2 Gen2, Type A · 1x 480Mbps USB 2.0, Type A · 8x Isolated DIO (4x DI/4x DO), 10-Pin Terminal Block

Storage

SSD/HDD mSATA

· 1x 2.5″ Front Accessible SATA HDD/SSD Drive Bay (SATA 3.0) · 1x mSATA Socket (SATA 3.0, shared by Mini-PCIe socket)

Expansion

Mini PCI Express

· 1x Full-size Mini-PCIe Socket

SIM Socket

· 1x SIM Socket

M.2

· 1x M.2 Key E 2230 Socket, Support Wireless Module

CFM (Control Function Module) · 1x CFM IGN Interface for optional CFM-IGN Module Expansion

Interface

· 1x CFM PoE Interface for optional CFM-PoE Module Expansion

CDS (Convertible Display System) Interface

· 1x CDS Interface for Convertible Display Module

Other Function

Clear CMOS Switch

· 1x Clear CMOS Switch

Reset Button

· 1x Reset Button

Instant Reboot

· Support 0.2sec Instant Reboot Technology

Watchdog Timer

· Software Programmable Supports 256 Levels System Reset

OSD Button

· LCD On/Off, Brightness Up, Brightness Down

Internal Speaker

· AMP 2W + 2W

Status LED Indicator

· Power LED, HDD LED, Temperature LED

Power

Power Button

· 1x ATX Power On/Off Button

Power Mode Switch

· 1x AT/ATX Mode Switch

Power Input

· 9-48VDC, 3-pin Terminal Block

Remote Power On/Off

· 1x Remote Power On/Off, 2-pin Terminal Block

Remote Power LED

· 1x Remote Power LED, 2-pin Terminal Block

Operating System

Windows

· Windows® 10

CS-100/P1201 Series | User Manual

44

Linux

· Supports by project

Physical

Dimension (W x D x H)

· 204.5 x 149 x 41.5 mm

Weight Information

· 1.54 KG

Mechanical Construction

· Extruded Aluminum with Heavy Duty Metal

Mounting

· Wall/ VESA/ CDS/ DIN Rail

Physical Design

· Fanless Design · Jumper-less Design

Reliability & Protection Reverse Power Input Protection · Yes

Over Voltage Protection

· Protection Range: 51-58V · Protection Type: shut down operating voltage, re-power on at the present level to recover

Over Current Protection

· 15A

CMOS Battery Backup

· SuperCap Integrated for CMOS Battery Maintenance-free Operation

MTBF

· 283,091 Hours – Database: Telcordia SR-332 Issue3, Method 1, Case 3

Environment

Operating Temperature

· -40°C to 70°C * PassMark BurnInTest: 100% CPU, 2D/3D Graphics (without thermal throttling) * With extended temperature peripherals; Ambient with air flow * According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14

Storage Temperature

· -40°C to 85°C

Relative Humidity

· 95%RH @ 70°C (non-Condensing)

Shock

· Operating, 50 Grms (w/ SSD, according to IEC60068-2-27)

Vibration

· Operating, 5 Grms, 5-500 Hz, 3 Axes (w/ SSD, according to IEC60068-2-64) · Operating, 1 Grms, 10-500 Hz, 3 Axes (w/ SSD, according to IEC60068-2-6)

Safety

· UL, cUL, CB, IEC/ EN 62368-1

* Product Specifications and features are for reference only and are subject to change without prior notice. For more information, please refer to the latest product datasheet from Cincoze’s website.

CS-100/P1201 Series | User Manual

45

Dimension
CS-W124C/P1201

Unit: mm

CS-100/P1201 Series | User Manual

46

1.5 System I/O
1.5.1 Front
Antenna Used to install an antenna jack SIM Card Slot Used to inserts a SIM card Reset Switch Used to reset the system AT/ATX Switch Used to select AT or ATX power mode IGN Setting Switch Used to set up IGN function

Clear CMOS Used to clear CMOS to reset BIOS Front Accessible 2.5″ HDD Tray Used to inserts a 2.5″ HDD/SSD Power LED Indicates the power status of the system HDD LED Indicates the status of the hard drive Power On/Off Press to power-on or power-off the system

1.5.2 Rear
DC IN Used to plug a DC power input with terminal block USB 3.2 GEN2 Used to connect USB 3.2 GEN2/3.2 GEN1/2.0/1.1 device LAN1, LAN2 Used to connect the system to a local area network

DisplayPort Used to connect the system with DP monitor VGA Used to connect an analog VGA monitor Remote Power On/Off Used to plug a remote power on/off terminal block Remote Power LED A terminal block used to connect to remote power on/off LED

CS-100/P1201 Series | User Manual

47

1.5.3 Right

COM3 COM port supports RS232/422/485 serial device DIO The Digital I/O terminal block supports 4 digital input and 4 digital output USB 2.0 Used to connect USB 2.0/1.1 device

Mic-In Used to connect a microphone Line-Out Used to connect a speaker Antenna Used to install an antenna jack

1.5.4 Left
Temperature LED Indicates the temperature of the system Antenna Used to install an antenna jack Increase Brightness Press to increase brightness of the screen Decrease Brightness Press to decrease brightness of the screen LCD On/Off Press to turn-on or turn-off the display

USB 3.2 GEN2 Used to connect USB 3.2 GEN2/3.2 GEN1/ /2.0/1.1 device COM1, COM2 COM ports support RS232/422/485 serial devices GND Used to connect to the earth ground to prevent electrical shock

CS-100/P1201 Series | User Manual

48

1.5.5 Top
VESA Mounting Hole These are mounting holes for VESA mount (75x75mm and 100x100mm)

CS-100/P1201 Series | User Manual

49

Chapter 2 Switches & Connectors

CS-100/P1201 Series | User Manual

50

2.1 Location of Switches and Connectors
2.1.1 Top View

CS-100/P1201 Series | User Manual

51

2.1.2 Bottom View

CS-100/P1201 Series | User Manual

52

2.2 Switches and Connectors Definition

Location AT_ATX1 CLR_CMOS1 RESET1 BL_UP1 BL_DN1 BL_PWR1 PWR_SW1 SW1 PWR_SSD_LED1 TEMP_LED1 IGN_PH1

Definition AT / ATX Power Mode Switch Clear CMOS Switch Reset Button Backlight Brightness Increase Button Backlight Brightness Decrease Button Backlight Power On / Off Button Power Switch Super CAP SW Power LED/ HDD LED Main Board Temperature LED IGN Board to Board Connector

USB3_1 / USB3_2

USB 3.2 GEN2 Connector

USB2_1 COM1_1 / COM2_1 / COM3_1 DC_IN1 LAN1/ LAN2 VGA1 DP1 DIO1 MIC_IN1 LINE_OUT1 MINIPCIE1 M2E_1 RMT_BNT1 Power1 SATA1 POE_PH1 SODIMM1 SIM1 SPK_R1

USB 2.0 Connector
DB9 Connectors, RS232 / RS422 / RS485 Connector
DC 9-48V Power Connector LAN Connector VGA Connector DisplayPort Connector 4DI / 4DO Connector Mic-in Jack Line-Out Jack Mini PCI-Express Socket (PCIE/ USB3.0/ mSATA Module) M.2 Key E Connector (Support PCIE type only) Remote Power Button/ Remote LED Connector +5V / +12V Power Output SATA Connector POE Board to Board Connector DDR4 SODIMM Slot SIM Card socket Speaker Out Connector for right side

CS-100/P1201 Series | User Manual

53

SPK_L1 GDC1 BAT1 SW2

Speaker Out Connector for left side Super CAP for CMOS Backup RTC Battery Holder Power Select for COM1/COM2/COM3

2.3 Definition of Switches

AT_ATX1: AT / ATX Power Mode Switch

Switch

Definition

1-2 (Right)

ATX Power Mode (Default)

2-3 (Left)

AT Power Mode

PWR_SW1: System Power Button

Switch

Definition

Push

Power System

CLR_CMOS1: Clear CMOS Switch

Switch

Definition

1-2 (Right)

Clear CMOS

2-3 (Left)

Normal Status (Default)

BL_PWR1: Backlight Power on / off

Switch

Definition

Push

Backlight Power on / off switching

BL_UP1: Backlight Brightness Increase

Switch

Definition

Push

Backlight Brightness Increase

BL_DN1: Backlight Brightness Decrease

Switch

Definition

Push

Backlight Brightness Decrease

RESET1: Reset Button

Switch

Definition

Push

Reset System

CS-100/P1201 Series | User Manual

54

SW1: Super CAP SW

Location Function

DIP1

DIP2

ON

SW1

Super

Enabled

ON (Default) ON (Default)

OFF

Cap

Disabled OFF

SW2: Power Select for COM1/COM2/COM3

Location Function

DIP1

DIP2

RI

ON (Default) ON (Default)

ON

SW2

COM1

5V

ON

OFF

OFF

12V

OFF

OFF

Location Function

DIP3

DIP4

RI

ON (Default) ON (Default)

ON

SW2

COM2

5V

ON

OFF

OFF

12V

OFF

OFF

Location Function

DIP5

DIP6

RI

ON (Default) ON (Default)

ON

OFF

SW2

COM3

5V

ON

OFF

12V

OFF

OFF

PWR_SSD_LED1: Power / HDD Access LED Status

LED

LED Color

Status

POWER

Green

POWER ON

HDD

Blinking Orange

HDD Read/Write

LAN1 / LAN2: LAN LED Status Definition

Act LED Status

Definition

Yellow & Blinking

Data Activity

Off

No Activity

Link LED Status

Definition

Green

1Gbps Network Link

Orange

100Mbps Network Link

Off

10Mbps Network Link

TEMP_LED1: Main Board Temperature LED Status

LED Status

Status

OFF

Main Board Temp 60°C

Blue

60°C < Main Board Temp 87°C

Red

87°C Main Board Temp

CS-100/P1201 Series | User Manual

55

2.4 Definition of Connectors
MINIPCIE1 : Mini PCI-Express Socket (mPCIE/ USB3/ SIM Module)

Pin No. 1 3 5 7 9 11 13 15
17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51

PIN Name

Pin No.

WAKE#

2

N/A

4

N/A

6

CLKREQ#

8

GND

10

REFCLK-

12

REFCLK+

14

GND

16

Mechanical Key

N/A

18

N/A

20

GND

22

PERN (USB3RN)/ SATA_RXP

24

PERP (USB3RP)/ SATA_RXN

26

GND

28

GND

30

PETN (USB3TN)/ SATA_TXN

32

PETP (USB3TP)/ SATA_TXP

34

GND

36

GND

38

+3VSB_MPCIE_FB

40

+3VSB_MPCIE_FB

42

GND

44

N/A

46

N/A

48

N/A

50

W_DISABLE2#

52

Pin name +3.3V GND 1.5V SIM_VCC SIM_DATA SIM_CLK SIM_Reset UIM_VPP (SIM_VPP)
GND W_DISABLE#
PERST# +3.3V GND +1.5V SMB_CLK SMB_DATA GND USB_D- USB_D+ GND N/A N/A N/A +1.5V GND +3.3V

CS-100/P1201 Series | User Manual

56

M2E_1 : M.2 Key E Connector (Support PCIE type only)

Pin No. 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67

PIN Name GND
USB_D+ USB_D-
GND N/A N/A GND N/A N/A GND N/A N/A Key Key Key Key GND PETP0 PETN0 GND PERP0 PERN0 GND REFCLKP0 REFCLKN0 GND CLKREQ0# PEWAKE0# GND WTD1N/PETP1 WTD1P/PETN1 GND WT_D0N/PERP1 WT_D0P/PERN1

Pin NO. 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68

Pin name +3.3V +3.3V N/A
PCM_CLK PCM_SYNC/LPC_RSTN
PCM_IN PCM_OUT
N/A GND UART_WAKE# UART_RX/BRI_RSP Key Key Key Key UARTX/RGI_DT UART_CTS/RGI_RSP UART_RTS/BRI_DT N/A N/A N/A N/A N/A N/A SUSCLK PERST0# W_DISABLE2# (PULL-UP) W_DISABLE1# (PULL-UP) I2C_DATA I2C_CLK N/A N/A PERST1# CLKREQ1#

CS-100/P1201 Series | User Manual

57

69

GND

70

71

WTCLKN/REFCLKP1

72

73

WTCLKP/REFCLKN1

74

75

GND

PEWAKE1# +3.3V +3.3V

DC_IN1: DC Power Input Connector (9-48V) Connector Type: Terminal Block 1×3 3-pin, 5.0mm pitch

Pin

Definition

1

9-48V IN

2

Ignition (IGN)

3

GND

1 2 3

CAUTION (ATTENTION)

Please disconnect the power source before mounting the DC power cables or connecting the DC power connector to system. (Veuillez débrancher la source d’alimentation avant de monter les câbles d’alimentation CC ou de connecter le connecteur d’alimentation CC au système.)

RMT_BNT1: Remote Power Button/ Remote LED Connector Remote Power LED connector can connect an external LED indicator up to 10mA. Connector Type: Terminal Block 1X4 4-pin, 3.5mm pitch

Pin

Definition

1

Remote Power Button

1 2 3 4

2

GND

3

Remote Power LED

4

GND

Do not apply power to this connector! This port is used to connect a SWITCH! (Ne mettez pas sous tension ce connecteur! Ce port est utilisé pour connecter un SWITCH!)

WARNING (AVERTIR)

CS-100/P1201 Series | User Manual

58

COM1_1 / COM2_1 / COM3_1: RS232 / RS422 / RS485 Connector Connector Type: 9-pin D-Sub

Pin RS232 Definition

RS422 / 485 Full Duplex Definition

RS485 Half Duplex Definition

1

DCD

TX-

DATA –

2

RXD

TX+

DATA +

3

TXD

RX+

4

DTR

RX-

5

GND

6

DSR

7

RTS

8

CTS

9

RI

POWER1: +5V / +12V Power Output

Connector Type: 1×4 4-pin Wafer, 2.0mm pitch

Pin

Definition

1

+5V

2

GND

3

GND

4

+12V

1 234 5 678 9
Pin 1 Gap

CS-100/P1201 Series | User Manual

59

Chapter 3 System Setup

CS-100/P1201 Series | User Manual

60

WARNING (AVERTIR)

3.1 Removing Top Cover
In order to prevent electric shock or system damage, must turn off power and disconnect the unit from power source before removing the chassis cover. (Afin d’éviter tout risque d’électrocution ou d’endommagement du système, vous devez couper l’alimentation et débrancher l’appareil de la source d’alimentation avant de retirer le couvercle du châssis.)
1. Loosen the 8 screws of front and rear panel, then place them aside.
2. Remove the cover from the chassis.
3. Place the top cover gently.

CS-100/P1201 Series | User Manual

61

3.2 Installing SO-DIMM Memory
1. Locate the SO-DIMM sockets.

2. Tilt the SO-DIMM module at a 45-degree angle and insert it to SO-DIMM socket until the gold-pated connector of module contacted firmly with the socket.
45°
3. Press the modules down until it’s fixed firmly by the two locking latches on each side.

CS-100/P1201 Series | User Manual

62

3.3 Installing Mini-PCIe Card
(Applicable for full or half size card)
1. Locate the Mini PCIe slot.

2. Insert the Mini-PCIe card at a 45-degree angle and insert it to the slot until the gold-pated connector of module contacted firmly with the slot.
45°
3. Press down the module and fasten two screws to secure the module.

CS-100/P1201 Series | User Manual

63

4. If you have a Half-size Mini-PCIe card, make sure use extender to make it Full-size as shown below.
3.4 Installing M.2 E Key Card
1. Locate the M.2 E Key slot on the system board.

2. Tilt the M.2 E Key card at a 45-degree angle and insert it to the socket until the golden finger connector of the card seated firmly.
45°

CS-100/P1201 Series | User Manual

64

3. Press the card down and secure it with 1 screw.
3.5 Installing Antenna(s)
Please install a mPCIe Wireless Lan card before putting on the washer and fasten the nut to the antenna jack. 1. Remove the antenna hole covers at front or side panel.

CS-100/P1201 Series | User Manual

65

2. Have antenna jack penetrate through the hole. 3. Put on washer and fasten the nut with antenna jack. 4. Assemble the antenna and antenna jack together.

CS-100/P1201 Series | User Manual

66

5. Attach the RF connector at another end of cable onto the module.

3.6 Installing CPU Thermal Pad
1. Place the thermal pad on the CPU heatsink.

thermal pad

CAUTION (ATTENTION)

Before assembling the system’s chassis cover, please make sure the protective film on the Thermal Pad has been removed! (Avant d’assembler le couvercle du châssis du système, assurez-vous que le film protecteur sur le coussin thermique a été retiré !d’alimentation CC au système.)

CS-100/P1201 Series | User Manual

67

3.7 Installing Top Cover
1. Put on the cover.
2. Fasten the 8 screws to fix the cover.

CS-100/P1201 Series | User Manual

68

3.8 Installing SIM Card
1. Loosen 2 screws on front panel to remove cover plate.
2. SIM card slot is at the front panel of the system.
3. Insert the SIM card.

CS-100/P1201 Series | User Manual

69

3.9 Disassembling Display Module
The complete shipping product is the CS display module already installed with P1201. This chapter will introduce how to dissemble the CS display module from P1201. 1. Remove the 6 screws on the display module.
2. Disconnect the modules.

CS-100/P1201 Series | User Manual

70

3.10 Installing SATA Hard Drive
1. Loosen 2 screws on front panel to remove cover plate. 2. Turn over the unit to have the bottom side face up and loosen 1 screw.
3. Pull out the HDD bracket.

CS-100/P1201 Series | User Manual

71

4. Make the bottom side of the HDD face up, place the HDD bracket on it. Ensure the direction of bracket is correct and use 4 provided screws to assemble HDD and HDD bracket together.
5. Align the HDD bracket with the entrance of HDD bay. And insert the HDD bracket until the connector of HDD contact the SATA connector firmly.
6. Turn over the unit to have the bottom side face up and fasten the screw.

CS-100/P1201 Series | User Manual

72

3.11 Installing Panel Mount
1. Accessories provided by Cincoze are as below. Before assembly, please prepare panel mount PPC and customer’s fixture.

CS-100/P1201 Series | User Manual

73

2. All mounting kits displayed are to be inserted into holes. 3. Installation preparation and steps.

CS-100/P1201 Series | User Manual

74

CS-100/P1201 Series | User Manual

75

4. Apply all mount kits to the rest of holes. And you have completed the panel mount installation, as shown below.

CS-100/P1201 Series | User Manual

76

Chapter 4 BIOS Setup

CS-100/P1201 Series | User Manual

77

4.1 BIOS Introduction
The BIOS (Basic Input/ Output System) is a program located on a Flash Memory on the motherboard. When you start the computer, the BIOS program will gain control. The BIOS first operates an auto-diagnostic test called POST (power on self-test) for all the necessary hardware, it detects the entire hardware device and configures the parameters of the hardware synchronization.
BIOS Setup Power on the computer and by pressing <Del> immediately allows you to enter Setup. If the message disappears before your respond and you still wish to enter Setup, restart the system to try again by turning it OFF then ON or pressing <Ctrl>, <Alt> and <Delete> keys.

Control Keys <> <> <> <> <Esc> <Enter> <Page Up/+> <Page Down/-> <Tab> <F1> <F2> <F3> <F10>

Move to select screen Move to select item Quit the BIOS Setup Select item Increases the numeric value or makes changes Decreases the numeric value or makes changes Select setup fields General help Previous value Load Optimized defaults Save configuration and Exit

Main Menu The main menu lists the setup functions you can make changes to. You can use the arrow keys ( ) to select the item. The on-line description of the highlighted setup function is displayed at the bottom of the screen.
Sub-Menu If you find a right pointer symbol appears to the left of certain fields that means a sub-menu can be launched from this field. A sub-menu contains additional options for a field parameter. You can use arrow keys ( ) to highlight the field and press <Enter> to call up the sub-menu. Then you can use the control keys to enter values and move from field to field within a sub-menu. If you want to return to the main menu, just press the <Esc >.

CS-100/P1201 Series | User Manual

78

4.2 Main Setup
Press <Del> to enter BIOS CMOS Setup Utility, the Main Menu (as shown below) will appears on the screen. Use arrow keys to move among the items and press <Enter> to accept or enter a sub-menu.
System Date Set the date. Please use <Tab> to switch between date elements. System Time Set the time. Please use <Tab> to switch between time elements.

CS-100/P1201 Series | User Manual

79

4.3 Advanced Setup
This section allows you to configure and improve your system and allows you to set up some system features according to your preference.

4.3.1 CPU Configuration

Intel Virtualization Technology [Enabled] Enables or disables Intel Virtualization Technology. Virtualization enhanced by Intel Virtualization Technology will allow a platform to run multiple operating systems and applications in independent partitions. With virtualization, one computer system can function as multiple virtual systems. Active Processor Cores [All] Number of cores to enable in each processor package.

CS-100/P1201 Series | User Manual

80

4.3.2 SATA Configuration
SATA Controller(s) [Enabled] Enables or disables SATA device. SATA Mode Selection [AHCI] Allows you to select which mode SATA controller will operates. Configuration options: [AHCI] Serial ATA Port 0 Port 0 [Enabled] Enables or disables SATA Port 0.
Serial ATA Port 1 Port 1 [Enabled] Enables or disables SATA Port 1.
4.3.3 PCH-FW Configuration

CS-100/P1201 Series | User Manual

81

Firmware Update Configuration Configure Management Engine Parameters
Me FW Image Re-Flash [Disabled] Enables or disables ME firmware Image Re-Flash function.
4.3.4 Trusted Computing Settings

Security Device Support [Enabled] Enables or disables Security Device Support function. SHA256 PCR Bank [Enabled] Enables or disables SHA256 PCR Bank function. SHA384 PCR Bank [Disabled] Enables or disables SHA384 PCR Bank function. SM3_256 PCR Bank [Disabled] Enables or disables SM3_256 PCR Bank function. Pending Operation [None] Allows you to select which mode Pending Operation will operate. Configuration options: [None], [TPM Clear] Platform Hierarchy [Enabled] Enables or disables Platform Hierarchy function. Storage Hierarchy [Enabled] Enables or disables Storage Hierarchy function. Endorsement Hierarchy [Enabled] Enables or disables Endorsement Hierarchy function. Physical Presence Spec Version [1.3] Allows you to select which mode Physical Presence Spec Version will operate. Configuration options: [1.2], [1.3]

CS-100/P1201 Series | User Manual

82

4.3.5 ACPI Settings
Enable Hibernation [Enabled] Enables or disables system ability to hibernate state (OS/S4 state). This option may not be effective with some OS. ACPI Sleep State [S3 (Suspend to RAM)] Allows users to select the highest Advanced Configuration Power Interface® (ACPI) sleep state that system will enter when suspend button is pressed. [Suspend Disabled]: Disables entering suspend state. [S3 (suspend to RAM)]: Enables suspend to RAM state. 4.3.6 F81966 Super IO Configuration Set Parameters of Serial Ports. User can Enable/Disable the serial port and Select an optimal setting for the Super IO Device.

CS-100/P1201 Series | User Manual

83

Serial Port 1~3 Configuration.
Serial Port [Enabled] Enables or disables serial port. Change Settings [Auto] Allows you to change the IO Address & IRQ settings of the specified serial port. Serial Port Mode [RS232] Allows you to select Serial Port Mode. Configuration options: [RS232] [RS422/RS485 Full Duplex] [RS485 Half Duplex] Watch Dog Mode [Sec] Allows to set watchdog timer unit <Sec> or <Min>. Watch Dog Timer [0] Allows you to set watchdog timer’s value in the range of 0 to 255.

CS-100/P1201 Series | User Manual

84

4.3.7 Hardware Monitor
This screen displays the current status of all monitored hardware devices/components such as voltages, temperatures.

4.3.8 S5 RTC Wake Settings

Wake system from S5 [Disabled] Enables or disables wake system from S5 (soft-off state). [Disabled]: Disables wake system from S5. [Fixed Time]: Sets a fixed time (HH:MM:SS) to wake system from S5. [Dynamic Time]: Sets an increase minute(s) from current time to wake system from S5.

CS-100/P1201 Series | User Manual

85

4.3.9 Serial Port Console Redirection

Console Redirection [Disabled] Allow users to enable or disable COM1, COM2, COM3 console redirection function.
4.3.10 USB Configuration

XHCI Hand-off [Enabled] Enables or disables XHCI (USB3.0) hand-off function. Use this feature as a workaround for operating systems without XHCI hand-off support. USB Mass Storage Driver Support [Enabled] Enables or disables USB mass storage driver support.

CS-100/P1201 Series | User Manual

86

4.3.11 Network Stack Configuration
Network Stack [Disabled] Enables or disables UEFI Network Stack.

CS-100/P1201 Series | User Manual

87

4.4 Chipset Setup
This section allows you to configure chipset related settings according to user’s preference.

4.4.1 System Agent (SA) Configuration

Memory Configuration This item displays detailed memory configuration in the system. Graphics Configuration
Primary Display [Auto] Allows users to enable or disable Primary Display Configuration options: [Auto] [IGFX] [PCIe] Internal Graphics [Auto] Allows users to enable or disable Internal Graphics. Configuration options: [Auto] [Disabled] [Enabled] VT-d [Enabled]

CS-100/P1201 Series | User Manual

88

Enables or disables Intel® Virtualization Technology for Directed I/O (VT-d) capability. 4.4.2 PCH-IO Configuration

PCI Express Configuration

PCI Express Root Port (MINIPCIE1) PCI Express Root Port [Enabled] Enables or disables PCI Express Root Port. PCIe Speed [Auto] Allows you to select PCI Express interface speed.
Configuration options: [Auto] [Gen1] [Gen2] [Gen3]. PCI Express Root Port (M2E_1)
PCI Express Root Port [Enabled] Enables or disables PCI Express Root Port.
PCIe Speed [Auto] Allows you to select PCI Express interface speed.

CS-100/P1201 Series | User Manual

89

Configuration options: [Auto] [Gen1] [Gen2] [Gen3]. PCI Express Root Port (M2E_1 2X1)
PCI Express Root Port [Enabled] Enables or disables PCI Express Root Port.
PCIe Speed [Auto] Allows you to select PCI Express interface speed. Configuration options: [Auto] [Gen1] [Gen2] [Gen3].
LAN 1 i210AT Controller [Enabled] Enables or disables I210 LAN Controller. LAN 2 i210AT Controller [Enabled] Enables or disables I210 LAN Controller. Wake# event (PCIe) [Enabled] Enables or disables Wake# event (PCIe). MINIPCIE1 Function Switch [Mini-PCIe] Allows you to change MINIPCIE1 as [Mini-PCIe] or [mSATA] or [USB3.0]. M2E_1 Mode Selection [2X1] Allows you to select M2E_1 mode as [2X1] or [1X2]. Audio Amplifier [Enabled] Enables or disables Audio Amplifier Function. Power Over Ethernet [Enabled] Enables or disables Power Over Ethernet Function. Power Failure [Keep last state] Allows you to specify which power state system will enter when power is resumed after a power failure (G3 state). [Always on]: Enters to power on state. [Always off]: Enters to power off state. [Keep last state]: Enters to the last power state before a power failure.

CS-100/P1201 Series | User Manual

90

4.5 Security Setup
This section allows users to configure BIOS security settings.

Administrator Password Administrator Password controls access to the BIOS Setup utility. User Password User Password controls access to the system at boot and to the BIOS Setup utility. Security Boot

Secure Boot [Disabled] Enable or disable Secure Boot function.
Secure Boot Mode [Standard] Allows you to select Secure Boor Mode. Configuration options: [Standard] [Custom].

CS-100/P1201 Series | User Manual

91

4.6 Boot Setup
This section allows you to configure Boot settings.

Setup Prompt Timeout [1] Use this item to set number of seconds (1..65535) to wait for setup activation key. Bootup NumLock State Allows you to set NumLock key to [On] or [Off] state when system boots up. Quiet Boot Allows you to enable or disable Quiet Boot function. Fast Boot Allows you to enable or disable Fast Boot function. If enabled, system boots with initialization of a minimal set of devices required to launch active boot option.

CS-100/P1201 Series | User Manual

92

4.7 Save & Exit

Save Changes and Exit This item allows you to exit the system after saving changes. Discard Changes and Exit This item allows you to exit system setup without saving any changes. Save Changes and Reset This item allows you to reset the system after saving changes. Discard Changes and Reset This item allows you to reset system setup without saving any changes. Save Changes This item allows you to save changes. Discard Changes This item allows you to discard changes. Restore Defaults This item allows you to restore/ load default values for all the setup options. Save as User Defaults This item allows you to save the changes done so far as user defaults. Restore User Defaults This item allows you to restore the user defaults to all the setup options.

CS-100/P1201 Series | User Manual

93

Chapter 5 Product Application

CS-100/P1201 Series | User Manual

94

5.1 Digital I/O (DIO) application
This section describes DIO application of the product. The content and application development are better understood and implemented by well experienced professionals or developers.

5.1.1 Digital I/O Programming Guide

5.1.1.1 Pins for Digital I/O 1~8

Item
GPIO 74 (PIN 107) GPIO 75 (PIN 108) GPIO 76 (PIN 109) GPIO 77 (PIN 110) GPIO 80 (PIN 111) GPIO 81 (PIN 112) GPIO 82 (PIN 113) GPIO 83 (PIN 114)

Standard
DI
DO

5.1.1.2 Programming Guide
To program the Super I/O chip F81966D configuration registers, the following configuration procedures must be followed in sequence: (1) Enter the Extended Function Mode (2) Configure the configuration registers (3) Exit the Extended Function Mode
The configuration register is used to control the behavior of the corresponding devices. To configure the register, using the index port to select the index and then write data port to alter the parameters. The default index port and data port are 0x4E and 0x4F respectively. To enable configuration, the entry key 0x87 must be written to the index port. To disable configuration, write exit key 0xAA to the index port. Following is an example to enable configuration and to disable configuration by using debug. -o 4E 87 -o 4E 87 (enable configuration) -o 4E AA (disable configuration)

5.1.1.3 Relative Registers To program the F81966D configuration registers, see the following configuration procedures.

CS-100/P1201 Series | User Manual

95

CS-100/P1201 Series | User Manual

96

GPIO access way by Digital I/O (Access GPIO data register Only) GPIO access way by Coniguration register port (Access 0x4E/0x4F port with device number 0x06)

CS-100/P1201 Series | User Manual

97

CS-100/P1201 Series | User Manual

98

5.1.1.4 Sample Code in C Language This sample code is demonstrate how to access GPIO by the way of Configuration Register port. 5.1.1.4.1 Control of GP74 to GP77 (DI1~DI4) #define AddrPort 0x4E #define DataPort 0x4F

<Enter the Extended Function Mode>

WriteByte(AddrPort, 0x87)

WriteByte(AddrPort, 0x87)

// Must write twice to enter extended mode

<Select Logic Device> WriteByte(AddrPort, 0x07) WriteByte(dataPort, 0x06)

// Select logic device 06h

<Output/Input Mode Selection> // Set GP74 to GP77 input mode

WriteByte(AddrPort, 0x80) // Select configuration register 80h

WriteByte(DataPort, 0x0X)

// Set bit 4~7 = 0 to select GP 74~77 as input mode.

<Input Value> WriteByte(AddrPort, 0x82) ReadByte(DataPort, Value)

// Select configuration register 82h // If read bit 4~7 as 0xFX, thus GP74~77 is all high.
// If read bit 4~7 as 0x0X, thus GP74~77 is all low.

<Leave the Extended Function Mode> WriteByte(AddrPort, 0xAA)

5.1.1.4.2 Control of GP80 to GP83 (DO1~DO4)

#define AddrPort 0x4E #define DataPort 0x4F

<Enter the Extended Function Mode> WriteByte(AddrPort, 0x87) WriteByte(AddrPort, 0x87) // Must write twice to enter extended mode

<Select Logic Device> WriteByte(AddrPort, 0x07) WriteByte(DataPort, 0x06)

// Select logic device 06h

<Output/Input Mode Selection> // Set GP80 to GP83 output mode WriteByte(AddrPort, 0x88) // Select configuration register 88h

CS-100/P1201 Series | User Manual

99

WriteByte(DataPort, 0xXF)

// Set bit 0~3 = 1 to select GP 80~83 as output mode

<Output Value> WriteByte(AddrPort, 0x89) // Select configuration register 89h WriteByte(DataPort, Value) // Set bit 0~3 = (0 or 1) to output GP 80~83 as low or High
<Leave the Extended Function Mode> WriteByte(AddrPort, 0xAA)

5.1.1.5 Change base address <Enter the Extended Function Mode> WriteByte(AddrPort, 0x87) WriteByte(AddrPort, 0x87) // Must write twice to enter Extended mode

<Select Logic Device> WriteByte(AddrPort, 0x07) WriteByte(dataPort, 0x06)

// Select logic device 06h

WriteByte(AddrPort, 0x60) // Select configuration register 60h (High Byte address) WriteByte(DataPort, (0x0A))

WriteByte(AddrPort, 0x61) // Select configuration register 61h (Low Byte address) WriteByte(DataPort, (0x00))

<Leave the Extended Function Mode> WriteByte(AddrPort, 0xAA)

Note: Cincoze default DIO Port base address is 0xA00h

CS-100/P1201 Series | User Manual

100

5.1.1.6 DATA Bit Table (GPIO)

7 6 5 4 3 2 1 0 bit

=DI1

7 6 5 4 3 2 1 0 bit

=DO1

0 0 0 1 – – – – value (Base address +3) – – – – 0 0 0 1 value (Base address +2)

1

X

/h

(0xA03)

X

1

/h

(0xA02)

7 6 5 4 3 2 1 0 bit

=DI2

7 6 5 4 3 2 1 0 bit

=DO2

0 0 1 0 – – – – value (Base address +3) – – – – 0 0 1 0 value (Base address +2)

2

X

/h

(0xA03)

X

2

/h

(0xA02)

7 6 5 4 3 2 1 0 bit

=DI3

7 6 5 4 3 2 1 0 bit

=DO3

0 1 0 0 – – – – value (Base address +3) – – – – 0 1 0 0 value (Base address +2)

4

X

/h

(0xA03)

X

4

/h

(0xA02)

7 6 5 4 3 2 1 0 bit

=DI4

7 6 5 4 3 2 1 0 bit

=DO4

1 0 0 0 – – – – value (Base address +3) – – – – 1 0 0 0 value (Base address +2)

8

X

/h

(0xA03)

X

8

/h

(0xA02)

5.1.1.7 DIO I/O Port Address (Default Address 0xA00)

Pin Definition Data Bits DIO Type
I/O Port Address

DI4 DI3 DI2 DI1 DO4 DO3 DO2 DO1

7

6

5

4

3

2

1

0

Digital Input

Digital Output

0xA03

0xA02

CS-100/P1201 Series | User Manual

101

5.2 Digital I/O (DIO) Hardware Specification
XCOM+: Isolated power in V+ XCOM-: Isolated power in V Isolated power in DC voltage: 9-30V 4x Digital Input (Source Type) Input Signal Voltage Level
– Signal Logic 0: XCOM+ = 9V, Signal Low – V- < 1V XCOM+ > 9V, V+ – Signal Low > 8V
– Signal Logic 1: > XCOM+ – 3V Input Driving Sink Current:
– Minimal: 1 mA – Normal: 5 mA 4x Digital Output (Open Drain) – DO Signal have to pull up resistor to XCOM+ for external device, the
resistance will affect the pull up current – Signal High Level: Pull up resistor to XCOM+ – Signal Low Level: = XCOM- Sink Current: 1A (Max)

5.2.1 DIO Connector Definition

DIO1: Digital Input / Output Connector Connector Type: Terminal Block 1X10 10-pin, 3.5mm pitch

Pin Definition

1

XCOM+ (DC INPUT)

2

DI1

3

DI2

4

DI3

5

DI4

Pin Definition 6 DO1 7 DO2 8 DO3 9 DO4 10 XCOM- (GND)

CS-100/P1201 Series | User Manual

102

CS-100/P1201 Series | User Manual

103

Chapter 6 Optional Modules and Accessories

CS-100/P1201 Series | User Manual

104

6.1 Pin Definition & Settings

6.1.1 CFM-IGN101

SW2: IGN Function Switch Set shutdown delay timer when ACC is turned off

Pin 1

Pin 2 Pin 3 Pin 4

ON

ON

ON

ON

ON

OFF

ON

OFF

ON

ON (IGN Enabled)

ON

OFF

OFF

/

OFF (IGN Disabled)

OFF

ON

ON

OFF

ON

OFF

OFF

OFF

ON

OFF

OFF

OFF

Definition 0 second 1 minute 5 minutes 10 minutes 30 minutes 1 hour 2 hours Reserved (0 second)

24V_12V_1: 12V / 24V Car Battery Switch

Pin

Definition

1-2

24V Car Battery Input (default)

2-3

12V Car Battery Input

CS-100/P1201 Series | User Manual

105

6.2 Installing CFM Modules
6.2.1 CFM-IGN101
1. Locate the IGN connector on system motherboard as indicated.

2. Insert CFM-IGN module vertically to the female connector on the system’s mainboard, and fasten 2 screws to fix it.

3. Loosen 2 screws on front panel to remove cover plate. 4. IGN function switch is at the front panel of the system.

CS-100/P1201 Series | User Manual

106

6.2.2 CFM-PoE02
1. Locate the PoE connector on system motherboard as indicated.

2. Insert the female connector of CFM-PoE module to the male connector on system motherboard.

3. Turn over the heatsink and paste the thermal pad onto the marked by red squares.

CAUTION (ATTENTION)

Before putting on the thermal block (in the next step), please make sure the protective film on the Thermal Pad has been removed! (Avant de mettre le bloc thermique (à l’étape suivante), veuillez vous assurer que le film protecteur sur le coussin thermique a été retiré!)

CS-100/P1201 Series | User Manual

107

4. Paste the heatsink onto the CFM-PoE module carefully and fasten 2 screws to fix it.

5. Paste the thermal pads onto the heatsink and coil carefully.

CAUTION (ATTENTION)

Before assembling the system’s chassis cover, please make sure the protective film on the Thermal Pad has been removed! (Avant d’assembler le couvercle du châssis du système, assurez-vous que le film protecteur sur le coussin thermique a été retiré !d’alimentation CC au système.)
6. When the system is power on, please note that the POE LED will light on if the POE module is properly installed.

CS-100/P1201 Series | User Manual

108

6.3 Installing Accessories
6.3.1 VESA Mounting
The following picture indicates VESA mounting hole pattern on P1201 series, which is compliant with VESA mounting standard.
1. Please fasten the VESA screws as indicated to fix it on the stand.

CS-100/P1201 Series | User Manual

109

6.3.2 URM01
1. Locate the screw holes on the PC or monitor module.

2. Put on the rack mount base and fasten the screws.

3. Locate the Rack mount bracket holes.
For P2002E For P2002/P1001E For M1101/ P1001/P1101/P1201/P301/ P2102/P2102E/P2202/P2202E

For 8.4″ ~ 17″ Panel PC series
For M1101P1001/P1101/P1201/P1301/ P2102/ P2102E/P2202/P2202E For P2002/P1001E For P2002E

For 19″ ~ 24″ Panel PC series

CS-100/P1201 Series | User Manual

110

4. Assemble two rack mount brackets by fastening 4 screws (M5x6) at each side.

Left view

Right view

Bottom view

For 8.4″ ~ 17″ Panel PC series

Left view

Right view

Bottom view

For 19″ ~ 24″ Panel PC series

CS-100/P1201 Series | User Manual

111

5. Assemble two rack mount brackets by fastening 4 screws (M5x12), flat washers and hex nuts at each side.
For 8.4″ ~ 17″ Panel PC series
For 19″ ~ 24″ Panel PC series

CS-100/P1201 Series | User Manual

112

© 2023 Cincoze Co., Ltd. All rights reserved.
The Cincoze logo is a registered trademark of Cincoze Co., Ltd. All other logos appearing in this catalog are the intellectual property of the respective company, product, or organization associated with the logo. All product specifications and information are subject to change without notice.

Documents / Resources

cincoze CS-115C High Performance Sunlight Readable Panel PC [pdf] User Manual
CS-108C, CS-110HC, CS-112HC, CS-115C, CS-115C High Performance Sunlight Readable Panel PC, CS-115C, High Performance Sunlight Readable Panel PC, Sunlight Readable Panel PC, Readable Panel PC, Panel PC

References

Leave a comment

Your email address will not be published. Required fields are marked *