CHERY LIFE Rectangle Picnic Table
Specifications
| Component | Quantity |
|---|---|
| Table (A) | 1 piece |
| Bench (B) | 2 pieces |
| Right Leg (C) | 1 piece |
| Left Leg (D) | 1 piece |
| Connection Bracket | 2 pieces |
| M10*25 Screws | 32 pieces |
| Expansion Screws | 4 pieces |
Assembly Steps
Step 1: Connect Table to the Table Legs
Align the table top (A) with the right leg (C) and left leg (D). Secure using the M10*25 screws.
Step 2: Connect the Connecting Bracket to the Table Legs
Attach the connection brackets to the table legs using the provided screws. Ensure they are tightly secured.
Step 3: Connect the Bench to the Table Legs
Position each bench (B) on either side of the table and attach them to the table legs. Use the screws to secure them firmly.
Step 4: Finalize Installation
- Use a drill to create holes in concrete, block, or stone where the table will be placed.
- Blow the dust out of the holes.
- Place the connection bracket on the table leg.
- Fix the screws flush with the bracket into the drilled holes.
- Repeat the above steps for the remaining brackets.
FAQ
- Q: How do I secure the table and bench to the legs?
A: Use the provided M10*25 screws for the table and bench attachment. - Q: What type of surface can I install this product on?
A: You can install this product on concrete, block, or stone surfaces following the provided instructions.
Documents / Resources
 |
CHERY LIFE Rectangle Picnic Table [pdf] Installation Guide Rectangle Picnic Table, Picnic Table, Table |