CHERRY-LOGO

CHERRY AK-920S-U USB Smart Card Reader

CHERRY-AK-920S-U-USB-Smart-Card-Reader-PRODUCT

Specifications

  • Keyboard Compatibility
  • Temperature Range
  • Supply Voltage: 5V +/-10% through USB
  • Current Consumption: Ca. 50mA (USB: Low Power Device)
  • Dimensions: Appr. 80mm x 50mm x 60mm
  • Weight: Appr. 0,35kg (without packaging)
  • Interface: USB 2.0 (12Mbit/S)
  • System-Interface: PC/SC, CCID
  • Smart Cards, Protocols
  • Data Transfer Rates

Product Usage Instructions

  1. Connection: Plug the USB Smart Card Reader into an available USB port on your PC or laptop.
  2. Installation: Allow your operating system to automatically install the necessary drivers for the smart card reader.
  3. Smart Card Insertion: Insert your smart card into the reader with the chip facing down and towards the device.
  4. Data Transfer: Once the smart card is detected, you can transfer data securely between the card and your system.
  5. Removal: Safely remove the smart card from the reader when done to prevent data loss or corruption.

TROUBLESHOOTING

No Function/Error:
If the device is not functioning properly, follow these steps:

  1. Replug the device into the USB port.
  2. Restart your computer.

If the issue persists or there are other defects, please contact us with the following information:

  • Article and serial number of the product
  • Name and producer of your PC/notebook or motherboard
  • Operating system and installed version of the service pack

The AK-920S-U smart card reader is the ideal solution for integrating SCR products into existing systems. It is particularly suitable for use in the industry and in the office.

Technical Data

Keyboard

  • Compatibility CCID, Windows, MAC OSX, Solaris
  • Temperature Range Storage: -20°C to +60°C Operation: -0°C to +50°C
  • Supply Voltage 5V +/-10% through USB
  • Current Consumption Ca. 50mA (USB: Low Power Device)
  • Dimensions Appr. 80mm x 50mm x 60mm
  • Weight Appr. 0,35kg (without packaging)
  • Interface USB 2.0 (12Mbit/S)
  • System-Interface PC/SC, CCID
  • Smart Cards, Protocols Class A, B, C. ISO 7816 – 1, 2, 3, 4. T=0, T=1
  • Data Transfer Rates Reader to Smart Card up to 826 KBit/S
  • Agency Approvals CE, RoHS,

FAQ/Errors
No Function Please replug the device and restart the computer

If the product has other defects, please contact us.

Please hold this information ready when you contact us:

  • Article and serial number of the product
  • Name and producer of your PC/notebook or motherboard
  • Operating system and if installed version of the service pack

The product complies with the Directive EMC 2014/30/EU. The full text of the EU declaration of Conformity is available at the following internet address: http://www.cherry.de/compliance

Cherry Digital Health GmbH

  • Cherrystraße 2 D-91275 Auerbach/OPf.
  • Tel: +49 (0) 9643-2061-100
  • Web: www.cherry.de

All rights reserved. Copy or duplication, except for personal use, not permissible without specific prior written consent by Cherry Digital Health GmbH. Contents are subject to change without notice. Errors excepted. Copyright by Cherry Digital Health GmbH.

Version 20241107

Documents / Resources

CHERRY AK-920S-U USB Smart Card Reader [pdf] User Manual
AK-920S-U USB Smart Card Reader, AK-920S-U, USB Smart Card Reader, Smart Card Reader, Card Reader

References

Leave a comment

Your email address will not be published. Required fields are marked *