ChemScan RDO-X Optical Dissolved Oxygen Sensor
RDO-X Instruction Sheet
Set up and deploy your RDO instrument in four simple steps. Read the overview below, and then see the following pages for detailed instructions.
CONNECT
- Install the RDO cap and attach the instrument to a Wireless Rugged TROLL Com.
PAIR
- Use the VuSitu mobile app to pair your Wireless TROLL Com with your mobile device.
CALIBRATE
- The RDO-X is factory calibrated, but you can perform a calibration at any time with VuSitu. Select Calibrations from VuSitu’s menu. Follow the on- screen instructions.
DEPLOY
- Select Live Readings to view real-time readings from the instrument.
PARTS NUMBER
Kit #200036
- RDO-X with 10 meter cable
Kit #200035
- RDO-X with 5 meter cable
GETTING STARTED
Install the RDO cap.
- Align the RDO cap so the flat edge on the inside matches up with the flat edge on the sensor. Slide the RDO cap into place.
- Slide the nose guard into place and thread it clockwise to install.
Connect the instrument to a Wireless TROLL Com.
- Attach the RDO-X’s twist- lock connector to the end of the Wireless TROLL Com.
- Make sure the flat edges of the connectors align, and then push and twist.
- You will hear a click when the cable is connected properly.
- Press the power button on the Wireless TROLL Com.
Pair the Wireless TROLL Com with your mobile device.
You must have the Vusitu mobile app to use the RD0-X with a mobile device. Download VuSitu from the Google Play Store or the Apple App Store.
IOS
- An iOS device automatically connects to the closest In-Situ instrument.
- To connect to another instrument, press Disconnect and then Choose or Add Device. VuSitu displays a list of available connections.
ANDROID
- Launch VuSitu and tap Connect.
- The app locates and displays nearby In-Situ devices.
- Tap the serial number of the instrument or Wireless TROLL Com.
- VuSitu displays the Connected Instrument screen when pairing is complete.
Configure and deploy the RDO-X.
VuSitu will guide you through configuration, calibration, and other tasks. Choose an option from the menu to get started.
- Rio Refugio 9648
- Parque de Negocios ENEA,
- Pudahuel, Santiago ~ CHILE
- Tel. +56 2 28988221
- www.yalitech.cl
- www.in-situ.com
Documents / Resources
 |
ChemScan RDO-X Optical Dissolved Oxygen Sensor [pdf] Owner's Manual RDO-X Optical Dissolved Oxygen Sensor, RDO-X, Optical Dissolved Oxygen Sensor, Dissolved Oxygen Sensor, Oxygen Sensor, Sensor |
