CHEFMASTER HEG484 Induction Hob
Product Information
The HEG484 / HEG485 / HEG487 / HEG488 Induction Hobs are advanced cooking appliances designed to provide efficient and precise cooking experiences. These induction hobs offer a range of features to enhance your cooking process.
Specifications
- Model: HEG484 / HEG485 / HEG487 / HEG488
- Cookware Compatibility: Suitable cookware includes diameters between 12-26cm, all magnetic pans, enameled/non-enameled cast iron and iron pans, steel/mild steel/stainless steel pans
- Model Number: HEA505/TS/052024
Product Usage Instructions
Setting Up the Induction Hob
- Place the induction hob on a flat, stable surface.
- Ensure the hob is plugged into a suitable power source.
- Place compatible cookware on the hob before turning it on.
Operating the Induction Hob
- Press the power button to turn on the hob.
- Select the desired cooking temperature using the control panel.
- Place your ingredients in the cookware and start cooking.
Troubleshooting Guide
If you encounter any errors such as E0-E6, follow these steps:
- E0 – Check if the cookware is suitable for induction cooking.
- E1/E2 – Check the supply voltage.
- E3 – Allow the unit to cool and restart. If the fault persists, contact your service partner.
- E4-E6 – Contact your approved service partner for assistance.
Frequently Asked Questions (FAQ)
- What should I do if my induction hob shows an error code?
Refer to the troubleshooting guide in the manual for specific error code instructions. If needed, contact your approved service partner for further assistance. - What types of cookware are suitable for use with the induction hob?
Suitable cookware includes diameters between 12-26cm, all magnetic pans, enameled/non-enameled cast iron and iron pans, steel/mild steel/stainless steel pans.
Troubleshooting Guide
With the appliance unplugged.
| Error Code | |
| E0 – Incompatible cookware | Check cookware is suitable |
| E1 – Low Voltage | Check supply voltage |
| E2 – High Voltage | Check supply voltage |
| E3 – Top plate sensor short circuit | Allow unit to cool, restart |
| If fault persists, please contact your approved service partner. | |
| E4 – Top plate open sensor fault | Please contact your approved service partner. |
| E5 – UGBT Sensor overheat or short circuit | Please contact your approved service partner. |
| E6 – IGBT Sensor Open Circuit | Please contact your approved service partner. |
Suitable cookware – diameter between 12-26cm
- All magnetic pans
- Enameled/non enameled cast iron and iron pans
- Steel/mild steel/stainless steel pans
Unsuitable cookware
- Heat–resistant glass / Ceramic
- Copper / Aluminium pans
- Rounded bottom pans
Documents / Resources
 |
CHEFMASTER HEG484 Induction Hob [pdf] Instructions HEG484, HEG485, HEG487, HEG488, HEG484 Induction Hob, HEG484, Induction Hob, Hob |
