CHAINWAY C66 Android Mobile Computer Barcode Scanner User Manual

The C66 is an industrial-grade smart handheld terminal designed and manufactured by Shenzhen Chainway Information Technology Co.,Ltd. It runs on Android 7.1 / Android 9.0, providing fast performance and long battery life. It is suitable for various industries such as logistics, warehouse inventory, manufacturing, and retail to enhance information access and storage inventory efficiency.

Precautions Before Using the Battery

Do not leave the battery unused for a long time, whether inside the device or in storage.
If the battery has been unused for 6 months, check its charging function or dispose of it correctly.

The lifespan of a Li-ion battery is around 2 to 3 years, with a charging cycle of 300 to 500 times.
When not in use, the Li-ion battery will slowly discharge.Check the battery charging status frequently and refer to the manual for charging information.

Record the information of a new unused and non-fully charged battery for comparison with a battery that has been in use for a long time.

Statement

2013 by ShenZhen Chainway Information Technology Co., Ltd. All rights reserved.
No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission written from Chainway. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice.

The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on a licensed basis. Chainway grants to the user a non-transferable and non-exclusive license to use each software or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of Chainway. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Chainway.

Chainway reserves the right to make changes to any software or product to improve reliability, function, or design.
Chainway does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under any Chainway intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in Chainway products.

Product intro

Intro
C66 is an industrial-grade smart handheld terminal that has been designed and manufactured by Shenzhen Chainway information technology co, ltd .It is based on Android 7.1 / Android 9.0, which runs fast and has a long battery life. To meet the needs of multi-industry applications like logistics express, warehouse inventory, manufacturing, retail, etc., It can help customers to quickly access information and improve the efficiency of outbound storage inventory

Precaution before using battery

Do not leave battery unused for long time, no matter it is in device or inventory. If battery has been used for 6 months already, it should be check for charging function or it should be disposed correctly.

The lifespan of Li-ion battery is around 2 to 3 years, it can be circularly charged for 300 to 500 times. (One full battery charge period means completely charged and completely discharged.)
When Li-ion battery is not in used, it will continue discharge slowly. Therefore, battery charging status should be checked frequently and take reference of the related battery charging information on the manuals.

Observe and record the information of a new unused and non-fully charged battery. On the basis of operating time of new battery and compare with a battery that has been used for long time. According to product configuration and application program, the operating time of battery would be different.
Check battery charging status at regular intervals.

When battery operating time drops below about 80%, charging time will be increased remarkably.
If a battery is stored or otherwise unused for an extended period, be sure to follow the storage instructions in this document. If you do not follow the instructions, and the battery has no charge remaining when you check it, consider it to be damaged. Do not attempt to recharge it or to use it. Replace it with a new battery.

Store the battery at temperatures between 5 °C and 20 °C (41 °F and 68 °F).

Charger
The charger output voltage/current is 9V DC/2A. The plug considered as disconnect device of adapter.

NOTE

Using the incorrect type battery has danger of explosion. Please dispose the used battery according to instructions.

Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher. The connection to so called power USB is prohibited.
The adapter shall be installed near the equipment and shall be easily accessible.
The suitable temperature for the product and accessories is 0-10℃ to 50℃.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Installation instructions

Appearance

C66 back and front appearances are showing as follows:

Buttons instruction

Button		Description
Side button	1. Power	Locate on right side, press to ON/OFF device.
	2. PTT key	Locate on right side, its function can be defined by software.
	3.SCAN	Scanning button located on both sides. There are two scanning buttons.
	4. Volume +/-	Volume up and down

Install Micro SD and SIM cards

The cards sockets are showing as follows:

Battery charge
By using USB Type-C contact, the original adaptor should be used for charging the device. Make sure not to use other adaptors to charge the device.

Buttons and function area display
C66 has 6 side buttons, 2D scanning module locates on the top. HD camera and flashlight locate at rear. NFC identification surrounds the camera.

Call function

Calling numbers
Please check with your telecommunications or cellular company to confirm if their SIM will allow you to connect to their network. Every region and carrier globally, supports differentbands and has differing requirements. This could impact your ability to use a Sim card in this device and you may be limited to Wi-Fi onl

Click icon

Click number key to input phone numbers.
Click icon to call.
Click icon to end call.

Contacts

Click contacts to open contacts list.
Click icon to add new contacts.

Click icon to import/export contacts

SMS and MMS

Click to open message window.

Click to input message receiver and contents.
Click to send out messages.
Click to add attachment pictures and videos.

Barcode reader-writer

In App Center, to open 2D barcode scan test.
Press “SCAN” button or click scan key to start scanning, the parameter “Auto interval” can be adjusted.

Caution: Please scan codes in correct way otherwise the scanning will be failed.

2D code:

Max. radiant power: 0.6mW
Wave length: 655nM

IEC 60825-1 (Ed.2.0).
21CFR 1040.10 and 1040.11 standard.

RFID reader

NFC
Click App Center, open “NFC” to read and write tag information.

Other functions

PING tool

Open “PING” in App Center.
Setup PING parameter and select external/internal address.

Bluetooth

Open “BT Printer” in App Center.
In the list of detected devices, click the device that you want to pair.

Select printer and click “Print” to start printing contents.

GPS

Click “GPS” in App Center to open GPS test.
Setup GPS parameters to access GPS information.

Volume setup

Click “Volume” in App Center.
Setup volume by requirements.

Sensor

Click “Sensor” in App Center.

Setup the sensor by requirements.

Keyboard

Click “Keyboard” in App Center.
Setup and test the main value of the device.

Network

Click “Network” in App Center.
Test WIFI/Mobile signal by requirements.

Keyboard emulator
The keyboard emulator can be used in multiple operating background and output formats directly. And it includes Prefix/Suffix/Enter/TAB.
Please check Keyboard emulator manual for more details.

Device characteristic

Physical characteristics

Size	160x76x15.5mm / 6.32.990.61in
Weight	＜287g/10.12oz(with battery)
Display	5.45-inch display, IPS LTPS 1440*720
Touch panel	Corning Gorilla Glass, multi-touch panel, gloves and wet hands supported
Battery	4300mAh removable main battery, 5200mAh optional pistol battery, support QC3.0 and RTC Standby: over 300 hours (only main battery) Continuous use: over 12 hours (depending on user environment) Charging time: 2.5hours (charge device by standard adaptor and USB cable)
Expansion	Supports up to 128 GB Micro SD card
Expansion Slot	2 slot for SIM card, 1 slot for TF card
Audio	2 Microphones, 1 for noise reduction
Camera	13MP autofocus camera with flashlight

Performance

CPU	Qualcomm Octa-core 1.8GHz / 2.0GHz
OS	Android 9.0 / Android 7.1
RAM	2GB / 3GB
Communication Interface	USB3.0,Type-C,OTG
ROM	16GB/32GB
Max. expansion	Supports up to 128 GB Micro SD card

User environment

Operating temp.	-20℃ to 50℃
Storage Temp.	-40℃ to 70℃
Humidity	5%RH – 95%RH non condensing
Sealing	IP65, IEC sealing standard
Drop specification	Multiple 1.5m/4.9ft drops (at least 20 times) to the concrete across the operating temperature range Multiple 2.4m/7.87ft drops (at least 20 times) to the concrete after installed rubber bumper

Data collection

Barcode scanning	SE4710
RFID	NFC 13.56Mhz

Developing Environment

SDK	Chainway software develop kit
Language	Java
Develop	Eclipse/Android Studio

Frequently Asked Questions

Q: Can the C66 terminal be used in extreme temperatures?
A: The C66 terminal is designed for industrial use and can withstand a wide range of temperatures, but it is recommended to operate within the specified temperature range for optimal performance.

Q: How do I update the software on the C66 terminal?
A: To update the software on the C66 terminal, please refer to the user manual or contact technical support for detailed instructions on the software update process.

Q: Is the C66 terminal compatible with third-party applications?
A: The C66 terminal supports Android applications, but compatibility with third-party applications may vary. It is recommended to test compatibility before full deployment.

Documents / Resources

CHAINWAY C66 Android Mobile Computer Barcode Scanner [pdf] User Manual
C66, C66 Android Mobile Computer Barcode Scanner, C66, Android Mobile Computer Barcode Scanner, Computer Barcode Scanner, Barcode Scanner, Scanner

References

User Manual

CHAINWAY C66 Android Mobile Computer Barcode Scanner

Product Usage Instructions