CEPTERTECH-logo

CEPTERTECH COMNIPRO Ultra Lightweight Omni Pro Wireless Mouse

CEPTERTECH-COMNIPRO-Ultra-Lightweight-Omni-Pro-Wireless-Mouse-product

Technical Specifications

  • Number of Buttons: 6 buttons (5 programmable)
  • Connectivity: Wired/2.4GHz/Bluetooth
  • Switch Rating: 100 million clicks
  • Resolution: 400 (red) – 800 (green) – 1600 (blue) – 2400 (yellow) – 3200 (cyan) – 6400 (purple) – 26000 (white) DPI
  • Polling Rate: 1000Hz (Wired/2.4GHz)
  • Max Speed: 650 IPS
  • Max Acceleration: 50 G
  • Battery Capacity: Built-in 300mAh Li-ion Battery
  • Battery Life: Up to 38h/45h (2.4GHz/Bluetooth)
  • Input: 5V CEPTERTECH-COMNIPRO-Ultra-Lightweight-Omni-Pro-Wireless-Mouse-fig-7500mA
  • Product Size: 120 X 62 X 38 ±2mm
  • Product Weight: Approx. 45g (Mouse only)
  • Compatibility: Windows 7/8.1/10/11, macOS 10.5 and above, iOS 13.4 and above, iPadOS 14 and above, Linux, Chrome OS, Android 5.0 and above

Safety Precautions

To prevent fire, injury, electric shock, or equipment damage, please refrain from immersing the product in liquids, spraying liquid on it, or allowing liquid to enter the device. Cease use if there is significant damage.

Packaging List

  • 1 x Gaming Mouse;
  • 1 x User manual;
  • 1 x USB A-C cable;
  • 1 x USB Nano Receiver

Product Introduction

CEPTERTECH-COMNIPRO-Ultra-Lightweight-Omni-Pro-Wireless-Mouse-fig-1

Connection

  • USB Connection(2.4G)
    Step 1: Insert the USB receiver into the input devices. Step 2: Set the connection mode switch to 2.4GHz Mode. Step 3: Complete.CEPTERTECH-COMNIPRO-Ultra-Lightweight-Omni-Pro-Wireless-Mouse-fig-2
  • Bluetooth Connection
    • Step 1: Set the Connection mode switch to BT Mode.
    • Step 2: Long-press the pairing button for 3-5s entering paired modes.
    • Step 3: On the tablet/computer/mobile phone, navigate to the “Bluetooth” interface in the settings menu. Connect to the paired mouse (COMNIPRO).
    • Step 4: Complete.CEPTERTECH-COMNIPRO-Ultra-Lightweight-Omni-Pro-Wireless-Mouse-fig-3
  • Wired Connection
    Turn the Connection mode switch to OFF, connect the mouse and the input devices via a Type C cable. You can play and charge at the same time.CEPTERTECH-COMNIPRO-Ultra-Lightweight-Omni-Pro-Wireless-Mouse-fig-4Note: Do not use a fast charger to charge directly.

Indicator Light

Charging indicator: red light, and the light goes off after fully charged; Low power indicator: flashing red light;
Mode indicator: 2.4GHz (green), Bluetooth (blue).

Driver Download

Customize mouse buttons, DPI settings, macro settings, and other functions can all be set in the software driver. Go to power.no
Note: The driver is only compatible with Windows 10 and above systems. It is recommended to disable antivirus software during installation to prevent installation failure.

CEPTERTECH-COMNIPRO-Ultra-Lightweight-Omni-Pro-Wireless-Mouse-fig-5 This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection, systems for recycling in the EU. For more information, Please contact the local authority or your retailer where you Purchased the product.

Power International AS, PO Box 523, 1471 Lørenskog, Norway

CEPTERTECH-COMNIPRO-Ultra-Lightweight-Omni-Pro-Wireless-Mouse-fig-6

FAQ

  • Q: How do I switch between different DPI levels?
    A: Press the DPI button on the mouse to cycle through the available DPI settings.
  • Q: Is the mouse compatible with macOS?
    A: Yes, the mouse is compatible with macOS versions 10.5 and above.
  • Q: How can I check the battery status of the mouse?
    A: The indicator lights on the mouse will show the battery status, indicating when it is low and needs recharging.

Documents / Resources

CEPTERTECH COMNIPRO Ultra Lightweight Omni Pro Wireless Mouse [pdf] User Manual
COMNIPRO Ultra Lightweight Omni Pro Wireless Mouse, COMNIPRO, Ultra Lightweight Omni Pro Wireless Mouse, Lightweight Omni Pro Wireless Mouse, Omni Pro Wireless Mouse, Wireless Mouse

References

Leave a comment

Your email address will not be published. Required fields are marked *