celexon PT1010 Projector Table
Specifications
- Product Name: Projector Table
- Manufacturer: celexon
- Recommended Use: Projecting equipment
- Usage Environment: Indoor
Safety Instructions
Please read and follow all the safety instructions below and on the product before installing the projector table. Failure to comply with the safety instructions may result in property damage or personal injury and could affect the safety features contained in the unit. Please retain all safety instructions.
- Please refer to the enclosed data sheet for further safety and usage instructions before installation.
- Do not start installation until you have read and understood the complete operating instructions.
- Carry out the installation with another person to ensure safe installation.
- Remove the product from its packaging and remove all packaging materials. Make sure that there is no packaging material on or in the product. If you notice any damage to the packaging, also check whether there is any damage to the product. If you notice any external damage to the unit or any unexpected or unusual functioning, do not continue to use the product. Contact the dealer from whom you purchased the product or cCelexondirectly (Web: www.celexon.co.uk, Mail: info@celexon.co.uk) for further information.
- To ensure trouble-free operation, the product must only be used indoors and is NOT suitable for outdoor use.
- Children under the age of 16 are not permitted to use the appliance and any accessories.
- Ensure that no children play with the appliance or are in the vicinity without supervision.
- Modifying or altering the product will compromise product safety.
- Caution: Risk of injury! Never modify the product without authorization.
- Only carry out repairs yourself after consulting your dealer or Celexon.
- Do not use the product near corrosive gas, water, or in a dusty environment.
- Handle the product with care. It can be damaged by knocks, blows, or falling
- from even a small height. Keep the product away from moisture.
- Never immerse the product in water or other liquids.
- Use the product only in the manner intended. Use for other purposes may result in damage to the product or its environment.
- Tighten the screws, but do not overtighten them. Overtightening (e.g. by using a cordless screwdriver) can cause damage and impair safe usage.
- The product should be checked at least once a year for stability and load-bearing safety.
- Caution Risk of injury! The product can pinch fingers, so be careful with your hands when operating the tiltable shelves.
- Failure to follow the above instructions may result in personal injury and damage to the product or equipment
placed on it. Incorrect installation or use may also invalidate the warranty. - If you are unsure about the use of the product, contact your dealer or cCelexondirectly (Web: www.celexon.co.uk, Mail: info@celexon.co.uk).
- Technical changes and errors excepted.
The manufacturer accepts no responsibility for damage to property or personal injury, if the bracket is used outside the recommended specifications, or in the event of improper installation.
Installation
- Place the projector table on a flat, stable surface.
- Secure the table in place using the provided brackets or mounting hardware.
- Adjust the height and angle of the table to suit your projection needs.
Maintenance
Regularly check for any loose screws or components and tighten them if necessary. Clean the table with a damp cloth and mild detergent to remove dust or dirt buildup.
FAQs
Q: Can I use this projector table outdoors?
A: No, the projector table is recommended for indoor use only to prevent damage from outdoor elements.
Q: What is the weight capacity of the projector table?
A: The weight capacity is specified by the manufacturer and should not be exceeded for safety reasons.
Documents / Resources
 |
celexon PT1010 Projector Table [pdf] Instruction Manual PT1010, PT1010 Projector Table, PT1010, Projector Table, Table |
